Jianbo Shi

Graphene and Graphene Oxide Sheets Supported on Silica as Versatile and High‐Performance Adsorbents for Solid‐Phase Extraction

Graphene and graphene oxide sheets supported on silica as versatile and high-performance adsorbents for solid-phase extraction

Evaluation of graphene as an advantageous adsorbent for solid-phase extraction with chlorophenols as model analytes

Graphene, a novel class of carbon nanostructures, possesses an ultrahigh specific surface area, and thus has great potentials for the use as sorbent materials. We herein demonstrate the use of graphene as a novel adsorbent for solid-phase extraction (SPE). Eight chlorophenols (CPs) as model analytes were extracted on a graphene-packed SPE cartridge, and then eluted with alkaline methanol. The concentrations in the eluate were determined by HPLC with multi-wavelength UV detection. Under the optimized conditions, high sensitivity (detection limits 0.1-0.4 ng/mL) and good reproducibility of CPs (RSDs 2.2-7.7% for run-to-run assays) were achieved. Comparative studies showed that graphene was superior to other adsorbents including C18 silica, graphitic carbon, single- and multi-walled carbon nanotubes for the extraction of CPs. Some other advantages of graphene as SPE adsorbent, such as good compatibility with various organic solvents, good reusability and no impact of sorbent drying, have also been demonstrated. The proposed method was successfully applied to the analysis of tap and river water samples with recoveries ranging from 77.2 to 116.6%. This work not only proposes a useful method for environmental water sample pretreatment, but also reveals great potentials of graphene as an excellent sorbent material in analytical processes.

A mussel-inspired polydopamine coating as a versatile platform for the in situ synthesis of graphene-based nanocomposites

A facile and universal approach to prepare graphene-based nanocomposites by in situ nucleation and growth of diverse noble metals, metal oxides and semiconducting nanoparticles on the surface of RGO is proposed.

Mercury profiles in sediments of the Pearl River Estuary and the surrounding coastal area of South China

The spatial and temporal variations of mercury (Hg) in sediments of the Pearl River Estuary (PRE) and the surrounding coastal area (South China Sea) were studied. In surface sediments, the concentrations of Hg ranged from 1.5 to 201ng/g, with an average of 54.4ng/g, displaying a decreasing trend with the distance from the estuary to the open sea. This pattern indicates that the anthropogenic emissions from the Pearl River Delta (PRD) region are probably the main sources of Hg in this coastal region. Using the (210)Pb dating technique, the historical changes in the concentrations and influxes of Hg in the last 100 years were also investigated. The variations in Hg influxes in sediment cores obviously correlate with the economic development and urbanization that has occurred the PRD region, especially in the last three decades.

Accumulation of total mercury and methylmercury in rice plants collected from different mining areas in China

A total of 155 rice plants were collected from ten mining areas in three provinces of China (Hunan, Guizhou and Guangdong), where most of mercury (Hg) mining takes place in China. During the harvest season, whole rice plants were sampled and divided into root, stalk & leaf, husk and seed (brown rice), together with soil from root zone. Although the degree of Hg contamination varied significantly among different mining areas, rice seed showed the highest ability for methylmercury (MeHg) accumulation. Both concentrations of total mercury (THg) and MeHg in rice plants were significantly correlated with Hg levels in soil, indicating soil is still an important source for both inorganic mercury (IHg) and MeHg in rice plants. The obvious discrepancy between the distribution patterns of THg and MeHg reflected different pathways of IHg and MeHg accumulation. Water soluble Hg may play more important role in MeHg accumulation in rice plants.

Hemimicelles/admicelles supported on magnetic graphene sheets for enhanced magnetic solid-phase extraction

In this work, superparamagnetic nanoparticle-decorated graphene (MG) sheets were synthesized and used as support for hemimicelles/admicelles for solid-phase extraction (SPE) of different compounds from environmental water samples for the first time. The MG sheets were facilely synthesized by a one-step, one-pot redox reaction between graphene oxide and Fe(II). Due to the large surface area and unique nanosheet morphology, MG served as an excellent nano-scaled support material for hemimicelles and admicelles, exhibiting higher loading capacity than conventional materials and pure Fe₃O₄ nanoparticles. The MG sheets could be negatively or positively charged depending on solution pH, allowing the extraction to be conducted in different modes. In cationic mode, cetyltrimethylammonium bromide (CTAB) was used as micelle-forming reagent, and perfluoroalkyl and polyfluoroalkyl substances (PFASs) and alkylphenols were used as model analytes. In anionic mode, sodium dodecyl sulfate (SDS) was used as micelle-forming reagent and alkyltrimethylammonium salts were selected as analytes. In both modes, the formation processes of hemimicelles/admicelles on MG sheets were studied and the extraction conditions were optimized. For PFASs, the analytical sensitivity was enhanced by 50-113-fold by the extraction, and the method detection limits (MDLs) ranged from 0.15 to 0.50 ng/L. For alkyltrimethylammonium salts, the MDLs were in the range of 1.4-8.0 ng/L. In both modes, good recoveries (56.3-93.9%) and reproducibility (run-to-run RSDs<9.3%) were obtained. The results from this work show a potential new role of graphene in analytical sample preparation.

Graphene-assisted matrix solid-phase dispersion for extraction of polybrominated diphenyl ethers and their methoxylated and hydroxylated analogs from environmental samples

In this work, we developed a novel graphene-assisted matrix solid-phase dispersion (GA-MSPD) method for extraction of polybrominated diphenyl ethers (PBDEs) and their methoxylated (MeO-) and hydroxylated (OH-) analogs from environmental samples. We found that grinding the solid sample with chemically converted graphene (CCG) powder yielded a tight contact and sufficient dispersion of the sample matrix due to the large surface area and flexible nanosheet morphology of CCG. The resultant blend was eluted using a two-step elution strategy: PBDEs and MeO-PBDEs were eluted firstly by hexane/dichloromethane and analyzed by GC-ECD, and then OH-PBDEs were eluted by acetone and determined by LC-ESI-MS/MS. The GA-MSPD conditions were optimized in detail. Better recoveries were obtained with GA-MSPD than with other sorbents (C18 silica, Florisil and carbon nanotubes) and other extraction techniques (Soxhlet and accelerated solvent extraction). Other advantages of GA-MSPD, including reduced consumption of sorbent and solvent, good selectivity and short extraction time, were also demonstrated. In analysis of soil samples, the method detection limits of five PBDEs, ten MeO-PBDEs and ten OH-PBDEs were in the range of 5.9-28.7, 14.3-46.6, and 5.3-212.6 pg g(-1) dry weight, respectively. The proposed method was successfully applied to the extraction of PBDEs, MeO-PBDEs and OH-PBDEs from different kinds of spiked environmental samples, including soil, tree bark and fish.

Simultaneous determination of five estrogens and four androgens in water samples by online solid-phase extraction coupled with high-performance liquid chromatography–tandem mass spectrometry

A novel method for simultaneous determination of five estrogens and four androgens by online solid-phase extraction (SPE) coupled with high-performance liquid chromatography-tandem mass spectrometry (HPLC-ESI-MS/MS) in water samples was developed. An aliquot of 50 mL water sample after filtration was injected directly into autosampler and the analytes were preconcentrated on a NG1 online SPE column. After cleanup step the analytes were eluted in back flush mode and then separated on a liquid chromatography column. The experimental parameters, such as sample loading flow rate, cleanup condition and elution time, were optimized in detail. Estrogens and androgens were detected in negative and positive mode, respectively. High ionization efficiency of all the analytes was achieved by adding of 1‰ ammonia in the mobile phase. The recoveries ranged from 31.8% to 119.0% and the inter-day RSDs ranged from 2.7% to 19.6%. The limits of detections (LODs) were between 0.1 and 2.5 ng/L. The proposed method was successfully applied to the analysis of three types of water samples, including river water, influent and effluent water from a wastewater treatment plant (WWTP). The recoveries of androgens were not that good and a further study is being planned to improve the sensitivity for them. The proposed method is simple, sensitive and suitable for simultaneous analysis and monitoring of estrogens and androgens in water samples.

Simple interface of high-performance liquid chromatography-atomic fluorescence spectrometry hyphenated system for speciation of mercury based on photo-induced chemical vapour generation with formic acid in mobile phase as reaction reagent.

Photo-induced chemical vapour generation (CVG) with formic acid in mobile phase as reaction reagent was developed as interface to on-line couple HPLC with atomic fluorescence spectrometry for the separation and determination of inorganic mercury, methylmercury (MeHg), ethylmercury (EtHg) and phenylmercury (PhHg). In the developed procedure, formic acid in mobile phase was used to decompose organomercuries and reduce Hg(2+) to mercury cold vapour under UV irradiation. Therefore, no post-column reagent was used and the flow injection system in traditional procedure is omitted. A number of operating parameters including pH of mobile phase, concentration of formate, flow rate of mobile phase, length of PTFE reaction coil, flow rate of carrier gas and Na(2)S(2)O(3) in sample matrix were optimized. The limits of detection at the optimized conditions were 0.085, 0.033, 0.029 and 0.038 microg L(-1) for inorganic mercury, MeHg, EtHg and PhHg, respectively. The developed method was validated by determination of certified reference material DORM-2 and was further applied in analyses of seafood samples from Yantai port, China. The UV-CVG with formic acid simplifies the instrumentation and reduces the analytical cost significantly.

L-cysteine-induced degradation of organic mercury as a novel interface in the HPLC-CV-AFS hyphenated system for speciation of mercury

By adding L-cysteine into the mobile phase of chromatography, a simple on-line high performance liquid chromatography-cold vapor generation-atomic fluorescence spectrometry (HPLC-CV-AFS) method for separation and determination of divalent mercury (Hg2+), monomethylmercury (MMC) and ethylmercury (EMC) was developed. Compared with the conventional HPLC-UV-CV-AFS hyphenated systems, the proposed HPLC-CV-AFS system is very simple and low cost as no strong oxidant, no additional post-column interface, such as ultraviolet or microwave, and no organic solvent were needed. Parameters influencing mercury separation and determination were optimized in detail. The detection limits for MMC, EMC and Hg2+, based on three folds of baseline noise and 100 μL injection, were 0.05, 0.07, and 0.1 μg L−1, respectively. The relative standard deviation (RSD) for three parallels determinations varied from 1.4 to 2.5% at a concentration level of 50 μg L−1. The proposed method was successfully applied to analyze two certified reference material, DORM-2 (dogfish muscle) and TORT-2 (lobster hepatopancreas), and biological samples.