Jianxun Chen

Investigation Progresses and Applications of Fractional Derivative Model in Geotechnical Engineering

Over the past couple of decades, as a new mathematical tool for addressing a number of tough problems, fractional calculus has been gaining a continually increasing interest in diverse scientific fields, including geotechnical engineering due primarily to geotechnical rheology phenomenon. Unlike the classical constitutive models in which simulation analysis gradually fails to meet the reasonable accuracy of requirement, the fractional derivative models have shown the merits of hereditary phenomena with long memory. Additionally, it is traced that the fractional derivative model is one of the most effective and accurate approaches to describe the rheology phenomenon. In relation to this, an overview aimed first at model structure and parameter determination in combination with application cases based on fractional calculus was provided. Furthermore, this review paper shed light on the practical application aspects of deformation analysis of circular tunnel, rheological settlement of subgrade, and relevant loess researches subjected to the achievements acquired in geotechnical engineering. Finally, concluding remarks and important future investigation directions were pointed out.

Blasting vibration monitoring of undercrossing railway tunnel using wireless sensor network

The construction blasting in a new tunnel will undoubtedly influence the structure of existing tunnel. In order to monitor the effect of the blast-induced vibration on the structure of existing tunnel, a wireless sensor network (WSN) was established, which included the blast vibration monitoring system and the wireless remote data acquisition system. An existing railway tunnel was monitored during the construction of a new tunnel in Shaanxi, China. Concrete strain and peak particle velocity (PPV) were adopted to evaluate the influence of new tunnel construction blasting on the structure of existing tunnel. The monitoring results indicated that the concrete strain was different before and after the two tunnels crossing, which was much larger in front of the excavation face, and then it decreased gradually after the crossing. The PPV at the side wall of existing tunnel toward the blasting source was quite higher, and the location of maximum PPV changes with the process of tunnel excavation. When the distance between the existing and new tunnels was 4 m, the PPV reached 11.83 cm/s, which was already beyond the safe value, so the explosive charge should be reduced.

Characteristics of seismic disasters and aseismic measures of tunnels in Wenchuan earthquake

Abstract Over the past few years, accompanied by big and frequent earthquakes, more attention was paid to the tunnel earthquake resistance. To reduce tunnel seismic damage and explore the reasonable aseismic measures, the tunnel earthquake disaster investigation was employed to analyze and summarize the tunnel seismic damage on the basis of Wenchuan earthquake. Fifty-two tunnels near the epicenter of Sichuan Province were investigated: Only 7 tunnels did not show structure damage, 6 tunnels suffered the most serious damage, and the rest appeared damage to various extents. It indicates that most serious seismic damage happens to fault fracture zone, followed by entrance and common section of the tunnel. Additionally, the results display that the typical seismic damage of tunnels is lining cracking, collapsing, dislocation, construction joints cracking, and uplifting of invert, and usually lining cracking and collapsing account for a larger proportion. Therefore, the tunnel aseismic design should emphasize the fault fracture zone and tunnel entrance. Tunnel design should adopt the composite lining structure with shock absorber and whole chain alternative grouting to prevent the lining cracking and collapsing in the seismic fortification zone.

Fiber Bragg Grating Sensors-Based In Situ Monitoring and Safety Assessment of Loess Tunnel

Compared with electrical strain gauges, fiber Bragg grating (FBG) sensing technology is a relatively novel method for tunnel structural health monitoring, which has a number of advantages including high accuracy, multiplexing, electromagnetic interference resistance, and good repeatability. In order to study the internal force of the tunnel liner and detect the potential safety hazards, series of strain monitoring tests of a loess tunnel, taking into account the complex stress and strain variation of the loess during tunnelling, were performed by employing the tandem linear FBG sensor arrays controlled by the wavelength division multiplexing (WDM) technology. The concrete strain has obvious linear characteristics over time in the early stage and then gradually tends to a stable value. Moreover, after the necessary temperature compensation, loess tunnel structure safety was assessed through the analysis of real-time strain and internal force of the liner concrete, and the FBG monitoring data and safety assessment results indicate that the safety factors of various liner sections all meet the code requirements, which verify the safety and stability of the tunnel liner structure. The FBG sensors-based in situ monitoring technology can be well applied in the loess tunnel structure safety assessment.

Prediction of soil deformation in tunnelling using artificial neural networks

In the past few decades, as a new tool for analysis of the tough geotechnical problems, artificial neural networks (ANNs) have been successfully applied to address a number of engineering problems, including deformation due to tunnelling in various types of rock mass. Unlike the classical regression methods in which a certain form for the approximation function must be presumed, ANNs do not require the complex constitutive models. Additionally, it is traced that the ANN prediction system is one of the most effective ways to predict the rock mass deformation. Furthermore, it could be envisaged that ANNs would be more feasible for the dynamic prediction of displacements in tunnelling in the future, especially if ANN models are combined with other research methods. In this paper, we summarized the state-of-the-art and future research challenges of ANNs on the tunnel deformation prediction. And the application cases as well as the improvement of ANN models were also presented. The presented ANN models can serve as a benchmark for effective prediction of the tunnel deformation with characters of nonlinearity, high parallelism, fault tolerance, learning, and generalization capability.

New Technology and Experimental Study on Snow-Melting Heated Pavement System in Tunnel Portal

In recent years, with the rapid growth of economy and sharp rise of motor vehicles in China, the pavement skid resistance in tunnel portals has become increasingly important in cold region. However, the deicing salt, snow removal with machine, and other antiskid measures adopted by highway maintenance division have many limitations. To improve the treatment effect, we proposed a new snow-melting approach employing electric heat tracing, in which heating cables are installed in the structural layer of road. Through the field experiment, laboratory experiment, and numerical investigation, structure type, heating power, and preheating time of the flexible pavement heating system in tunnel portal were systematically analyzed, and advantages of electric heat tracing technology in improving the pavement skid resistance in tunnel portal were also presented. Therefore, such new technology, which offers new snow-melting methods for tunnel portal, bridge, mountainous area, and large longitudinal slope in cold region, has promising prospect for extensive application.

Settlement Analysis of Saturated Tailings Dam Treated by CFG Pile Composite Foundation

Cement fly ash gravel (CFG) pile composite foundation is an effective and economic foundation treatment approach, which is significant to building foundation, subgrade construction, and so forth. The present paper aims at investigating the settlement behaviors of saturated tailings dam soft ground under CFG pile composite foundation treatment, in which FEM and laboratory model test were utilized. The proposed findings demonstrate that CFG pile treatment is effective in reinforcing saturated tailings dam and loading has little influence on settlement of soil between piles. The variation of soil between piles settlement in FEM has a good agreement with the laboratory model test. Additionally, the cushion deformation modulus has a small effect on the composite foundation settlement, although the cushion thickness will generate certain influence on the settlement distribution of the composite foundation.

In Situ Test of Grouting Reinforcement for Water-Enriched Sandy Gravel Ground in River Floodplain

The performance of the ground treatment is always critical for a tunnel excavated in unstable stratum. Laodongnanlu Xiangjiang Tunnel (Changsha, China) across the Xiangjiang River will be constructed in a sandy gravel ground which is characterized by loose structure, extensive porosity, elevated sensitivity, poor stability, and a high groundwater table. Permeation grouting will be employed to improve the bearing capacity and mitigate groundwater movement into the excavation. In order to seek suitable injection parameters and grouting method, a field trial of vertical grouting was conducted in the sandy gravel stratum in river floodplain. A series of tests focusing on grout material, grouting sequence of boreholes, injection pressure, and grouting volume were performed to improve the sandy gravel mass strength and reduce water permeability. The examination of the results obtained during water pressure testing and core drilling on completion of the grouting trial successfully demonstrated that the specified injection criteria had led to an expected effect. Grouting control method of this saturated sandy gravel stratum was concluded after the test, which would contribute to the future pregrouting work during the tunnelling.

Application of wireless intelligent control system for HPS lamps and LEDs combined illumination in road tunnel

Because of the particularity of the environment in the tunnel, the rational tunnel illumination system should be developed, so as to optimize the tunnel environment. Considering the high cost of traditional tunnel illumination system with high-pressure sodium (HPS) lamps as well as the effect of a single light source on tunnel entrance, the energy-saving illumination system with HPS lamps and LEDs combined illumination in road tunnel, which could make full use of these two kinds of lamps, was proposed. The wireless intelligent control system based on HPS lamps and LEDs combined illumination and microcontrol unit (MCU) Si1000 wireless communication technology was designed. And the remote monitoring, wireless communication, and PWM dimming module of this system were designed emphatically. Intensity detector and vehicle flow detector can be configured in wireless intelligent control system, which gather the information to the master control unit, and then the information is sent to the monitoring center through the Ethernet. The control strategies are got by the monitoring center according to the calculated results, and the control unit wirelessly sends parameters to lamps, which adjust the luminance of each segment of the tunnel and realize the wireless intelligent control of combined illumination in road tunnel.

Application of a Total Station with RDM to Monitor Tunnel Displacement

AbstractFormulas for tunnel crown settlement and horizontal displacement measurement are presented in this paper according to the theory of tunnel displacement as measured by a total station with t...