Jier Huang

Well-dispersed single-walled carbon nanotube/polyaniline composite films

Abstract Single-walled carbon nanotube (SWNT)/polyaniline (PANI) composite films with good uniformity and dispersion were prepared by electrochemical polymerization of aniline containing well-dissolved SWNTs. The results of atomic force microscopy (AFM) and UV–Vis adsorption spectroscopy show that aniline can be used to solubilize SWNTs via formation of donor–acceptor complexes. The electrochemical deposition of SWNT–aniline solutions have been investigated by cyclic voltammetry. The results show that SWNT-based aniline solutions exhibit a drastic increase in peak current within the potential scanning region. The doping effect of SWNTs on PANI films was investigated by electrochemistry and FTIR spectroscopy. The results indicate that the enhanced electroactivity and conductivity of the SWNT/PANI composite films may be due to the strong interaction between SWNTs and PANI, which facilitates the effective degree of electron delocalization.

Photoinduced Ultrafast Electron Transfer from CdSe Quantum Dots to Re-bipyridyl Complexes

Ultrafast dissociation of excitons in CdSe quantum dots via electron transfer to adsorbed Re-bipyridyl complexes was demonstrated. The dissociation pathway was determined by the observation of reduced adsorbate using femtosecond IR spectroscopy. The rate of electron transfer was shown to increase at smaller QD sizes. Electron transfer time as fast as 2.3 ps was observed, faster than the exciton annihilation time in CdSe. The ultrafast charge separation in this quantum dot-adsorbate donor-acceptor complex provides a potential approach for separating multiple excitons in quantum dots.

Photodriven Charge Separation Dynamics in CdSe/ZnS Core/Shell Quantum Dot/Cobaloxime Hybrid for Efficient Hydrogen Production

Photodriven charge-transfer dynamics and catalytic properties have been investigated for a hybrid system containing CdSe/ZnS core/shell quantum dots (QDs) and surface-bound molecular cobaloxime catalysts. The electron transfer from light-excited QDs to cobaloxime, revealed by optical transient absorption spectroscopy, takes place with an average time constant of 105 ps, followed a much slower charge recombination process with a time constant of ≫3 ns. More interestingly, we also observed photocatalytic hydrogen generation by this QD/cobaloxime hybrid system, with >10,000 turnovers of H(2) per QD in 10 h, using triethanolamine as a sacrificial electron donor. These results suggest that QD/cobaloxime hybrids succeed in coupling single-photon events with multielectron redox catalytic reactions, and such systems could have potential applications in long-lived artificial photosynthetic devices for fuel generation from sunlight.

Multiple Exciton Dissociation in CdSe Quantum Dots by Ultrafast Electron Transfer to Adsorbed Methylene Blue

Multiexciton generation in quantum dots (QDs) may provide a new approach for improving the solar-to-electric power conversion efficiency in QD-based solar cells. However, it remains unclear how to extract these excitons before the ultrafast exciton-exciton annihilation process. In this study we investigate multiexciton dissociation dynamics in CdSe QDs adsorbed with methylene blue (MB(+)) molecules by transient absorption spectroscopy. We show that excitons in QDs dissociate by ultrafast electron transfer to MB(+) with an average time constant of approximately 2 ps. The charge separated state is long-lived (>1 ns), and the charge recombination rate increases with the number of dissociated excitons. Up to three MB(+) molecules per QD can be reduced by exciton dissociation. Our result demonstrates that ultrafast interfacial charge separation can effectively compete with exciton-exciton annihilation, providing a viable approach for utilizing short-lived multiple excitons in QDs.

Strong steric hindrance effect on excited state structural dynamics of Cu(I) diimine complexes

The metal-to-ligand-charge-transfer (MLCT) excited state of Cu(I) diimine complexes is known to undergo structural reorganization, transforming from a pseudotetrahedral D(2d) symmetry in the ground state to a flattened D(2) symmetry in the MLCT state, which allows ligation with a solvent molecule, forming an exciplex intermediate. Therefore, the structural factors that influence the coordination geometry change and the solvent accessibility to the copper center in the MLCT state could be used to control the excited state properties. In this study, we investigated an extreme case of the steric hindrance caused by attaching bulky tert-butyl groups in bis(2,9-di-tert-butyl-1,10-phenanthroline)copper(I), [Cu(I)(dtbp)(2)](+). The two bulky tert-butyl groups on the dtbp ligand lock the MLCT state into the pseudotetrahedral coordination geometry and completely block the solvent access to the copper center in the MLCT state of [Cu(I)(dtbp)(2)](+). Using ultrafast transient absorption spectroscopy and time-resolved emission spectroscopy, we investigated the MLCT state property changes due to the steric hindrance and demonstrated that [Cu(I)(dtbp)(2)](+) exhibited a long-lived emission but no subpicosecond component that was previously assigned as the flattening of the pseudotetrahedral coordination geometry. This suggests the retention of its pseudotetrahedral D(2d) symmetry and the blockage of the solvent accessibility. We made a comparison between the excited state dynamics of [Cu(I)(dtbp)(2)](+) with its mono-tert-butyl counterpart, bis(2-tert-butyl-1,10-phenanthroline)copper(I) [Cu(I)(tbp)(2)](+). The subpicosecond component assigned to the flattening of the D(2d) coordination geometry in the MLCT excited state was again present in the latter because the absence of a tert-butyl on the phenanthroline allows flattening to the pseudotetrahedral coordination geometry. Unlike the [Cu(I)(dtbp)(2)](+), [Cu(I)(tbp)(2)](+) exhibited no detectable emission at room temperature in solution. These results provide new insights into the manipulation of various excited state properties in Cu diimine complexes by certain key structural factors, enabling optimization of these systems for solar energy conversion applications.

Characterization of an amorphous iridium water-oxidation catalyst electrodeposited from organometallic precursors

Upon electrochemical oxidation of the precursor complexes [Cp*Ir(H(2)O)(3)]SO(4) (1) or [(Cp*Ir)(2)(OH)(3)]OH (2) (Cp* = pentamethylcyclopentadienyl), a blue layer of amorphous iridium oxide containing a carbon admixture (BL) is deposited onto the anode. The solid-state, amorphous iridium oxide material that is formed from the molecular precursors is significantly more active for water-oxidation catalysis than crystalline IrO(2) and functions as a remarkably robust catalyst, capable of catalyzing water oxidation without deactivation or significant corrosion for at least 70 h. Elemental analysis reveals that BL contains carbon that is derived from the Cp* ligand (∼ 3% by mass after prolonged electrolysis). Because the electrodeposition of precursors 1 or 2 gives a highly active catalyst material, and electrochemical oxidation of other iridium complexes seems not to result in immediate conversion to iridium oxide materials, we investigate here the nature of the deposited material. The steps leading to the formation of BL and its structure have been investigated by a combination of spectroscopic and theoretical methods. IR spectroscopy shows that the carbon content of BL, while containing some C-H bonds intact at short times, is composed primarily of components with C═O fragments at longer times. X-ray absorption and X-ray absorption fine structure show that, on average, the six ligands to iridium in BL are likely oxygen atoms, consistent with formation of iridium oxide under the oxidizing conditions. High-energy X-ray scattering (HEXS) and pair distribution function (PDF) analysis (obtained ex situ on powder samples) show that BL is largely free of the molecular precursors and is composed of small, <7 Å, iridium oxide domains. Density functional theory (DFT) modeling of the X-ray data suggests a limited set of final components in BL; ketomalonate has been chosen as a model fragment because it gives a good fit to the HEXS-PDF data and is a potential decomposition product of Cp*.

Exceptionally Long-Lived Charge Separated State in Zeolitic Imidazolate Framework: Implication for Photocatalytic Applications

Zeolitic imidazolate frameworks (ZIFs) have emerged as a novel class of porous metal-organic frameworks (MOFs) for catalysis application because of their exceptional thermal and chemical stability. Inspired by the broad absorption of ZIF-67 in UV-vis-near IR region, we explored its excited state and charge separation dynamics, properties essential for photocatalytic applications, using optical (OTA) and X-ray transient absorption (XTA) spectroscopy. OTA results show that an exceptionally long-lived excited state is formed after photoexcitation. This long-lived excited state was confirmed to be the charge-separated (CS) state with ligand-to-metal charge-transfer character using XTA. The surprisingly long-lived CS state, together with its intrinsic hybrid nature, all point to its potential application in heterogeneous photocatalysis and energy conversion.

Electron injection from copper diimine sensitizers into TiO2: Structural effects and their implications for solar energy conversion devices

Copper(I) diimine complexes have emerged as low cost replacements for ruthenium complexes as light sensitizers and electron donors, but their shorter metal-to-ligand-charge-transfer (MLCT) states lifetimes and lability of transient Cu(II) species impede their intended functions. Two carboxylated Cu(I) bis-2,9-diphenylphenanthroline (dpp) complexes [Cu(I)(dpp-O(CH2CH2O)5)(dpp-(COOH)2)](+) and [Cu(I)(dpp-O(CH2CH2O)5)(dpp-(Φ-COOH)2)](+) (Φ = tolyl) with different linker lengths were synthesized in which the MLCT-state solvent quenching pathways are effectively blocked, the lifetime of the singlet MLCT state is prolonged, and the transient Cu(II) ligands are stabilized. Aiming at understanding the mechanisms of structural influence to the interfacial charge transfer in the dye-sensitized solar cell mimics, electronic and geometric structures as well as dynamics for the MLCT state of these complexes and their hybrid with TiO2 nanoparticles were investigated using optical transient spectroscopy, X-ray transient absorption spectroscopy, time-dependent density functional theory, and quantum dynamics simulations. The combined results show that these complexes exhibit strong absorption throughout the visible spectrum due to the severely flattened ground state, and a long-lived charge-separated Cu(II) has been achieved via ultrafast electron injection (<300 fs) from the (1)MLCT state into TiO2 nanoparticles. The results also indicate that the TiO2-phen distance in these systems does not have significant effect on the efficiency of the interfacial electron-transfer process. The mechanisms for electron transfer in these systems are discussed and used to develop new strategies in optimizing copper(I) diimine complexes in solar energy conversion devices.

Synthesis of high-ordered LiMn2O4 nanowire arrays by AAO template and its structural properties

LiMnO2 nanowire arrays were prepared using a porous anodic aluminum oxide (AAO) template from a sol–gel solution containing Li(OAc) and Mn(OAc)2. Electron-microscope results showed that a uniform length and diameter of LiMnO2 nanowires were obtained, and the length and diameter of the LiMnO2 nanowires are dependent on the pore diameter and the thickness of the applied AAO template. X-ray diffraction and electron diffraction pattern investigations demonstrate that LiMnO2 nanowires are a layered structure of LiMnO2 crystal. X-ray photoelectron spectroscopy analysis indicates that a material closely resembling stoichiometric layered LiMnO2 has been obtained.

Synthesis of highly ordered LiNiO2 nanowire arrays in AAO templates and their structural properties

Abstract LiNiO 2 nanowire arrays were prepared with porous anodic aluminum oxide (AAO) templates from sol–gel solution containing Li(OAc) and Ni(OAc) 2 . Electron microscope results showed that uniform length and diameter of LiNiO 2 nanowires were obtained, and the length and diameter of the LiNiO 2 nanowires are dependent on the pore diameter and the thickness of the applied AAO template. X-ray diffraction (XRD) and electron diffraction investigations demonstrate that the LiNiO 2 nanowires have the layered structure of LiNiO 2 . X-ray photoelectron spectroscopy (XPS) analysis indicates that a nearly stoichiometric layered LiNiO 2 material has been obtained.