Jimoh O. Tijani

A Review of Pharmaceuticals and Endocrine-Disrupting Compounds: Sources, Effects, Removal, and Detections

There are growing concerns about the increasing trends of emerging micropollutants in the environment due to their potential negative impacts on natural ecosystems and humans. This has attracted attention from both governmental and non-governmental organisations worldwide. Pharmaceuticals, personal care products, and endocrine disruptors are continuously being released consciously or unconsciously into water sources due to poor regulatory frameworks especially in the developing countries. The effects of these contaminants are poorly known. They are not easily biodegradable and have become an environmental nuisance and public health issue. This has heightened the risk of exposure to their deleterious effects in such countries where the majority of the population are still struggling to have access to good quality drinking water supplies and better sanitation. With the rising fear of short- and long-term impacts of the ever-increasing number of persistent recalcitrant organic compounds accumulating in the environment, their removal is gradually becoming an issue to the water treatment industry. Hence, there is a need to develop functional techniques for the management of water contaminated by these emerging contaminants so as to increase the availability and access to safe and good-quality drinking water. We conducted a narrative review on these emerging micropollutants and examined their various documented sources, effects, as well as recent techniques for their effective removal. This becomes necessary due to the increasing occurrence of these pollutants in the aquatic and terrestrial environment. These levels are expected to further increase in the coming years as a consequence of the ever-increasing population density which undoubtedly characterizes developing economies. Our findings show that the present reported treatment techniques in the literature such as biological oxidation/biodegradation, coagulation/flocculation, ozonation, electrodialysis, reverse osmosis, sedimentation, filtration, and activated carbon were not designed for removal of these newly identified contaminants, and as such, the techniques are not sufficient and unable to completely degrade the compounds. We therefore recommended the need for concerted efforts to develop better techniques, especially combined advanced oxidative methods to address the shortcomings of and growing challenge to current practices.

Pharmaceuticals, endocrine disruptors, personal care products, nanomaterials and perfluorinated pollutants: a review

AbstractThe presence of emerging micropollutants such as pharmaceuticals, endocrine disruptors, personal care products, nanomaterials and perfluorinated substances in the environment remains a great threat to the health and safety of humans and aquatic species. These micropollutants enter the environment via anthropogenic activities and have been detected in surface water, groundwater and even drinking water at nanogram per litre to microgram per litre concentration. To date, limited information exists on the fate, behaviours, and pathways of these micropollutants in the environment. The potential ecotoxicological effects on the receptors due to exposure to individual or mixture of these chemicals still remain unknown. This review provides an overview on pharmaceuticals, endocrine disrupting compounds, personal care products, nanomaterials and perfluorinated pollutants, with emphasis on their occurrences, effects, environmental fates, and potential risk of exposure in water, soil or sediment. Based on the literature survey, it was found that in spite of an extensive research and different developmental efforts on the challenges of emerging micropollutants, the solution to the problem of emerging micropollutants in the environment is far from being solved. The needs for behavioural change among citizens, strong political will and policy formulation on the part of government are identified as possible panacea for combating the growing influence of these potential damaging substances. Suggestions on proactive and precautionary measures that must be taken to protect the environment as well as guarantee the health and safety of humans and aquatic species are provided. Future research should concentrate on the development of a risk based screening models and framework that can predict the sources, fate and behaviours of emerging contaminants in the environment is recommended.

A review of combined advanced oxidation technologies for the removal of organic pollutants from water

Water pollution through natural and anthropogenic activities has become a global problem causing short-and long-term impact on human and ecosystems. Substantial quantity of individual or mixtures of organic pollutants enter the surface water via point and nonpoint sources and thus affect the quality of freshwater. These pollutants are known to be toxic and difficult to remove by mere biological treatment. To date, most researches on the removal of organic pollutants from wastewater were based on the exploitation of individual treatment process. This single-treatment technology has inherent challenges and shortcomings with respect to efficiency and economics. Thus, application of two advanced treatment technologies characterized with high efficiency with respect to removal of primary and disinfection by-products in wastewater is desirable. This review article focuses on the application of integrated technologies such as electrohydraulic discharge with heterogeneous photocatalysts or sonophotocatalysis to remove target pollutants. The information gathered from more than 100 published articles, mostly laboratories studies, shows that process integration effectively remove and degrade recalcitrant toxic contaminants in wastewater better than single-technology processing. This review recommends an improvement on this technology (integrated electrohydraulic discharge with heterogeneous photocatalysts) viz-a-vis cost reduction in order to make it accessible and available in the rural and semi-urban settlement. Further recommendation includes development of an economic model to establish the cost implications of the combined technology. Proper monitoring, enforcement of the existing environmental regulations, and upgrading of current wastewater treatment plants with additional treatment steps such as photocatalysis and ozonation will greatly assist in the removal of environmental toxicants.

Degradation of organic pollutants and microorganisms from wastewater using different dielectric barrier discharge configurations—a critical review

The growing global drinking water crisis requires the development of novel advanced, sustainable, and cost-effective water treatment technologies to supplement the existing conventional methods. One such technology is advanced oxidation based on dielectric barrier discharge (DBD). DBD such as single and double planar and single and double cylindrical dielectric barrier configurations have been utilized for efficient degradation of recalcitrant organic pollutants. The overall performance of the different DBD system varies and depends on several factors. Therefore, this review was compiled to give an overview of different DBD configurations vis-a-viz their applications and the in situ mechanism of generation of free reactive species for water and wastewater treatment. Our survey of the literature indicated that application of double cylindrical dielectric barrier configuration represents an ideal and viable route for achieving greater water and wastewater purification efficiency.

Treatment of persistent organic pollutants in wastewater using hydrodynamic cavitation in synergy with advanced oxidation process

Persistent organic pollutants (POPs) are very tenacious wastewater contaminants. The consequences of their existence have been acknowledged for negatively affecting the ecosystem with specific impact upon endocrine disruption and hormonal diseases in humans. Their recalcitrance and circumvention of nearly all the known wastewater treatment procedures are also well documented. The reported successes of POPs treatment using various advanced technologies are not without setbacks such as low degradation efficiency, generation of toxic intermediates, massive sludge production, and high energy expenditure and operational cost. However, advanced oxidation processes (AOPs) have recently recorded successes in the treatment of POPs in wastewater. AOPs are technologies which involve the generation of OH radicals for the purpose of oxidising recalcitrant organic contaminants to their inert end products. This review provides information on the existence of POPs and their effects on humans. Besides, the merits and demerits of various advanced treatment technologies as well as the synergistic efficiency of combined AOPs in the treatment of wastewater containing POPs was reported. A concise review of recently published studies on successful treatment of POPs in wastewater using hydrodynamic cavitation technology in combination with other advanced oxidation processes is presented with the highlight of direction for future research focus.

Synthesis and characterization of carbon doped TiO2 photocatalysts supported on stainless steel mesh by sol-gel method

This study synthesized pure anatase carbon doped TiO2 photocatalysts supported on a stainless steel mesh using a sol-gel solution of 8% polyacrylonitrile (PAN)/dimethylformamide (DMF)/TiCl4. The influence of the pyrolysis temperature and holding time on the morphological characteristics, particle sizes and surface area of the prepared catalyst was investigated. The prepared catalysts were characterized by several analytical methods: high resolution scanning electron microscopy (HRSEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), and X-ray photoelectron spectroscopy (XPS). The XRD patterns showed that the supported TiO2 nanocrystals are typically anatase, polycrystalline and body-centered tetragonal in structure. The EDS and XPS results complemented one another and confirmed the presence of carbon species in or on the TiO2 layer, and the XPS data suggested the substitution of titanium in TiO2 by carbon. Instead of using calcination, PAN pyrolysis was used to control the carbon content, and the mesoporosity was tailored by the applied temperature. The supported TiO2 nanocrystals prepared by pyrolysis at 300, 350, and 400oC for 3 h on a stainless steel mesh were actual supported carbon doped TiO2 nanocrystals. Thus, PAN/DMF/TiCl4 offers a facile, robust sol-gel related route for preparing supported carbon doped TiO2 nanocomposites.

Synthesis, characterization and photocatalytic activity of Ag metallic particles deposited carbon-doped TiO2 nanocomposites supported on stainless steel mesh

In this present work, post deposition of metallic Ag nanoparticles on carbon-doped TiO2 nanocomposites supported on stainless steel mesh was achieved via a combination of sol–gel and thermal evaporation techniques. Poly acrylonitrile dissolved in dimethyl formamide and titanium tetra chloride was used as a carbon and titanium precursor, respectively. The photocatalytic activity of the prepared supported catalysts was evaluated by the degradation of an aqueous solution of methylene blue as a model pollutant under ultra-violet light irradiation. The prepared photocatalysts were characterized by several analytical techniques such as high resolution transmission electron microscopy, energy dispersive X-ray spectroscopy, Brunauer–Emmett–Teller measurements, X-ray photoelectron spectroscopy and X-ray diffraction. The XRD patterns and HRTEM micrographs confirmed the formation of a highly crystalline pure anatase TiO2 phase irrespective of the deposited metallic Ag particles. The Brunauer–Emmett–Teller N2 adsorption–desorption analysis revealed that the specific surface area of supported carbon-doped TiO2 nanocomposites without silver was 152 and 160 m2/g for metallic Ag deposited carbon-doped TiO2 nanocomposites. The X-ray photoelectron spectroscopy profile of the photocatalysts revealed the existence of Ti in oxidation state of +4 and metallic Ag in zero state, respectively. The results revealed that the percentage methylene blue removed was dependent on the amount of silver deposited and the catalyst surface area. The supported metallic Ag particles deposited carbon-doped TiO2 nanocomposites demonstrated 10.8% higher activity than the carbon-doped TiO2 nanocrystals without metallic Ag. The excellent reusability and stability of the Ag deposited carbon-doped TiO2 nanocomposites and high photocatalytic behavior after four consecutive applications was determined and methylene blue removal rate was maintained.Graphical Abstract