Jin Kwon Kim

Aquatic Toxicity Comparison of Silver Nanoparticles and Silver Nanowires

To better understand the potential ecotoxicological impact of silver nanoparticles (AgNPs) and silver nanowires (AgNWs) released into freshwater environments, the toxicities of these nanomaterials were assessed and compared using Organization for Economic Cooperation and Development (OECD) test guidelines, including a “Daphnia sp., acute immobilization test,” “Fish, acute toxicity test,” and “freshwater alga and cyanobacteria, growth inhibition test.” Based on the estimated median lethal/effective concentrations of AgNPs and AgNWs, the susceptibility to the nanomaterials was different among test organisms (daphnia > algae > fish), suggesting that the AgNPs are classified as “category acute 1” for Daphnia magna, “category acute 2” for Oryzias latipes, and “category acute 1” for Raphidocelis subcapitata, while the AgNWs are classified as “category acute 1” for Daphnia magna, “category acute 2” for Oryzias latipes, and “category acute 2” for Raphidocelis subcapitata, according to the GHS (Globally Harmonized System of Classification and Labelling of Chemicals). In conclusion, the present results suggest that more attention should be paid to prevent the accidental or intentional release of silver nanomaterials into freshwater aquatic environments.

28-Day inhalation toxicity of graphene nanoplatelets in Sprague-Dawley rats.

Abstract Graphene, a two-dimensional engineered nanomaterial, is now being used in many applications, such as electronics, biological engineering, filtration, lightweight and strong nanocomposite materials, and energy storage. However, there is a lack of information on the potential health effects of graphene in humans based on inhalation, the primary engineered nanomaterial exposure pathway in workplaces. Thus, an inhalation toxicology study of graphene was conducted using a nose-only inhalation system for 28 days (6 h/day and 5 days/week) with male Sprague-Dawley rats that were then allowed to recover for 1-, 28-, and 90-day post-exposure period. Animals were separated into 4 groups (control, low, moderate, and high) with 15 male rats (5 rats per time point) in each group. The measured mass concentrations for the low, moderate, and high exposure groups were 0.12, 0.47, and 1.88 mg/m3, respectively, very close to target concentrations of 0.125, 0.5, and 2 mg/m3. Airborne graphene exposure was monitored using several real-time instrumentation over 10 nm to 20 μm for size distribution and number concentration. The total and respirable elemental carbon concentrations were also measured using filter sampling. Graphene in the air and biological media was traced using transmission electron microscopy. In addition to mortality and clinical observations, the body weights and food consumption were recorded weekly. At the end of the study, the rats were subjected to a full necropsy, blood samples were collected for blood biochemical tests, and the organ weights were measured. No dose-dependent effects were recorded for the body weights, organ weights, bronchoalveolar lavage fluid inflammatory markers, and blood biochemical parameters at 1-day post-exposure and 28-day post-exposure. The inhaled graphenes were mostly ingested by macrophages. No distinct lung pathology was observed at the 1-, 28- and 90-day post-exposure. The inhaled graphene was translocated to lung lymph nodes. The results of this 28-day graphene inhalation study suggest low toxicity and a NOAEL of no less than 1.88 mg/m3.

Acute Toxicity Comparison of Single-Walled Carbon Nanotubes in Various Freshwater Organisms

While the commercialization of single-walled carbon nanotubes (SWCNTs) is rapidly expanding, the environmental impact of this nanomaterial is not well understood. Therefore, the present study evaluates the acute aquatic toxicity of SWCNTs towards two freshwater microalgae (Raphidocelis subcapitata and Chlorella vulgaris), a microcrustacean (Daphnia magna), and a fish (Oryzias latipes) based on OECD test guidelines (201, 202, and 203). According to the results, the SWCNTs inhibited the growth of the algae R. subcapitata and C. vulgaris with a median effective concentration (EC50) of 29.99 and 30.96 mg/L, respectively, representing “acute category 3” in the Globally Harmonized System (GHS) of classification and labeling of chemicals. Meanwhile, the acute toxicity test using O. latipes and D. magna did not show any mortality/immobilizing effects up to a concentration of 100.00 mg/L SWCNTs, indicating no hazard category in the GHS classification. In conclusion, SWCNTs were found to induce acute ecotoxicity in freshwater microalgae, yet not in D. magna and medaka fish.

5-Day repeated inhalation and 28-day post-exposure study of graphene

Abstract Graphene has recently been attracting increasing attention due to its unique electronic and chemical properties and many potential applications in such fields as semiconductors, energy storage, flexible electronics, biosensors and medical imaging. However, the toxicity of graphene in the case of human exposure has not yet been clarified. Thus, a 5-day repeated inhalation toxicity study of graphene was conducted using a nose-only inhalation system for male Sprague-Dawley rats. A total of three groups (20 rats per group) were compared: (1) control (ambient air), (2) low concentration (0.68 ± 0.14 mg/m3 graphene) and (3) high concentration (3.86 ± 0.94 mg/m3 graphene). The rats were exposed to graphene for 6 h/day for 5 days, followed by recovery for 1, 3, 7 or 28 days. The bioaccumulation and macrophage ingestion of the graphene were evaluated in the rat lungs. The exposure to graphene did not change the body weights or organ weights of the rats after the 5-day exposure and during the recovery period. No statistically significant difference was observed in the levels of lactate dehydrogenase, protein and albumin between the exposed and control groups. However, graphene ingestion by alveolar macrophages was observed in the exposed groups. Therefore, these results suggest that the 5-day repeated exposure to graphene only had a minimal toxic effect at the concentrations and time points used in this study.

Pulmonary Responses of Sprague-Dawley Rats in Single Inhalation Exposure to Graphene Oxide Nanomaterials

Graphene is receiving increased attention due to its potential widespread applications in future. However, the health effects of graphene have not yet been well studied. Therefore, this study examined the pulmonary effects of graphene oxide using male Sprague-Dawley rats and a single 6-hour nose-only inhalation technique. Following the exposure, the rats were allowed to recover for 1 day, 7 days, or 14 days. A total of three groups were compared: control (fresh air), low concentration (0.46 ± 0.06 mg/m3), and high concentration (3.76 ± 0.24 mg/m3). The exposure to graphene oxide did not induce significant changes in the body weights, organ weights, and food consumption during the 14 days of recovery time. The microalbumin and lactate dehydrogenase levels in the bronchoalveolar lavage (BAL) fluid were not significantly changed due to the exposure. Similarly, total cell count, macrophages, polymorphonuclear leukocytes, and lymphocytes were not significantly altered in the BAL fluid. Plus, the histopathological examination of the rat lungs only showed an uptake of graphene oxide in the alveolar macrophages of the high-concentration group. Therefore, these results demonstrate that the single inhalation exposure to graphene oxide induce minimal toxic responses in rat lungs at the concentrations and time points used in the present study.

Exposure monitoring of graphene nanoplatelets manufacturing workplaces

Abstract Graphenes have emerged as a highly promising, two-dimensional engineered nanomaterial that can possibly substitute carbon nanotubes. They are being explored in numerous R&D and industrial applications in laboratories across the globe, leading to possible human and environmental exposures to them. Yet, there are no published data on graphene exposures in occupational settings and no readily available methods for their detection and quantitation exist. This study investigates for the first time the potential exposure of workers and research personnel to graphenes in two research facilities and evaluates the status of the control measures. One facility manufactures graphene using graphite exfoliation and chemical vapor deposition (CVD), while the other facility grows graphene on a copper plate using CVD, which is then transferred to a polyethylene terephthalate (PET) sheet. Graphene exposures and process emissions were investigated for three tasks – CVD growth, exfoliation, and transfer – using a multi-metric approach, which utilizes several direct reading instruments, integrated sampling, and chemical and morphological analysis. Real-time instruments included a dust monitor, condensation particle counter (CPC), nanoparticle surface area monitor, scanning mobility particle sizer, and an aethalometer. Morphologically, graphenes and other nanostructures released from the work process were investigated using a transmission electron microscope (TEM). Graphenes were quantified in airborne respirable samples as elemental carbon via thermo-optical analysis. The mass concentrations of total suspended particulate at Workplaces A and B were very low, and elemental carbon concentrations were mostly below the detection limit, indicating very low exposure to graphene or any other particles. The real-time monitoring, especially the aethalometer, showed a good response to the released black carbon, providing a signature of the graphene released during the opening of the CVD reactor at Workplace A. The TEM observation of the samples obtained from Workplaces A and B showed graphene-like structures and aggregated/agglomerated carbon structures. Taken together, the current findings on common scenarios (exfoliation, CVD growth, and transfer), while not inclusive of all graphene manufacturing processes, indicate very minimal graphene or particle exposure at facilities manufacturing graphenes with good manufacturing practices.

Case study on risk evaluation of silver nanoparticle exposure from antibacterial sprays containing silver nanoparticles

This study evaluated the risk of silver nanoparticle (AgNP) exposure from antibacterial sprays containing AgNPs. Using an exposure simulation chamber as the setting for the experiment, various instruments, including a scanning mobility particle sizer (SMPS), condensation particle counter (CPC), dust monitor, and mixed cellulose esters (MCE) filters, are connected to the chamber to measure the exposure levels of AgNPs when using the sprays. To assess potential risks to consumers, margin of exposure (MOE) approach was used to assess risk in which a calculated MOE was compared with a target MOE. When evaluating the risk of antibacterial sprays to inhalation exposure using the MOE, spraying a whole can and spraying an air conditioner both resulted in a high-risk concern level with a MOE ranging from 59 to 146 that was much lower than the no-risk concern level of 1000, while some spray showed a MOE 2049 with no-risk concern level. The dermal exposure levels with a single layer of clothing were estimated at 2-50 µg/kg/day with a MOE ranging from 20,000 to 500,000. Therefore, the current results showed the possibility of high-risk inhalation exposure to AgNPs released when using antibacterial sprays.

Short-term inhalation study of graphene oxide nanoplates

Abstract Graphene oxides possess unique physicochemical properties with important potential applications in electronics, pharmaceuticals, and medicine. However, the toxicity following inhalation exposure to graphene oxide has not yet been clarified. Therefore, this study conducted a short-term graphene oxide inhalation toxicity analysis using a nose-only inhalation exposure system and male Sprague–Dawley rats. A total of four groups (15 rats per group) were exposed: (1) control (fresh air), (2) low concentration (0.76 ± 0.16 mg/m3), (3) moderate concentration (2.60 ± 0.19 mg/m3), and (4) high concentration (9.78 ± 0.29 mg/m3). The rats were exposed to graphene oxide for 6 h/day for 5 days, followed by recovery for 1, 3, and 21 days. No significant body or organ weight changes were noted after the short-term exposure or during the recovery period. Similarly, no significant systemic effects of toxicological importance were noted in the hematological assays, bronchoalveolar lavage fluid (BAL) inflammatory markers, BAL fluid cytokines, or blood biochemical assays following the graphene oxide exposure or during the post-exposure observation period. Moreover, no significant differences were observed in the BAL cell differentials, such as lymphocytes, macrophages, or polymorphonuclear cells. Graphene oxide-ingested alveolar macrophages as a spontaneous clearance reaction were observed in the lungs of all the concentration groups from post 1 day to post 21 days. Histopathological examination of the liver and kidneys did not reveal any significant test-article-relevant histopathological lesions. Importantly, similar to previously reported graphene inhalation data, this short-term nose-only inhalation study found only minimal or unnoticeable graphene oxide toxicity in the lungs and other organs.

Subacute inhalation toxicity study of synthetic amorphous silica nanoparticles in Sprague-Dawley rats

Abstract Synthetic amorphous silica nanoparticles (SiNPs) are one of the most applied nanomaterials and are widely used in a broad variety of industrial and biomedical fields. However, no recent long-term inhalation studies evaluating the toxicity of SiNPs are available and results of acute studies are limited. Thus, we conducted a subacute inhalation toxicity study of SiNPs in Sprague-Dawley rats using a nose-only inhalation system. Rats were separated into four groups and target concentrations selected in this study were as follows: control (fresh air), low- (0.407 ± 0.066 mg/m3), middle- (1.439 ± 0.177 mg/m3) and high-concentration group (5.386 ± 0.729 mg/m3), respectively. The rats were exposed to SiNPs for four consecutive weeks (6 hr/day, 5 days/week) except for control group of rats which received filtered fresh air. After 28-days of inhalation exposure to SiNPs, rats were sacrificed after recovery periods of one, seven and 28 days. Although there were minimal toxic changes such as temporary decrease of body weight after exposure, increased levels of red blood cells (RBCs) and hemoglobin (Hb) concentration, the lung histopathological findings and inflammatory markers in bronchoalveolar lavage (BAL) fluid including polymorphonuclear (PMN) leukocyte, lactate dehydrogenase (LDH), albumin and protein did not show significant changes at any recovery period. The results of this study suggest that the subacute inhalation of SiNPs had no toxic effects on the lung of rats at the concentrations and selected time points used in this study.

Case study on risk evaluation of printed electronics using nanosilver ink

BackgroundWith the ever-increasing development of nanotechnology, our society is being surrounded by possible risks related to exposure to manufactured nanomaterials. The consumer market already includes many products that contain silver nanoparticles (AgNPs), including various household products, such as yoga mats, cutting boards, running shirts, and socks. There is a growing concern over the release of AgNPs in workplaces related to the manufacture and application of nanomaterials.ObjectiveThis study investigated the release of AgNPs during the operation of a printed electronics printer.MethodsUsing an exposure simulation chamber, a nanoparticle collector, scanning mobility particle sizer (SMPS), condensation particle counter (CPC), dust monitor, and mixed cellulose ester (MCE) filters are all connected to measure the AgNP exposure levels when operating a printed electronics printer.ResultsA very small amount of AgNPs was released during the operation of the printed electronics printer, and the number of AgNPs inside the exposure simulation chamber was lower than that outside background. In addition, when evaluating the potential risks for consumers and workers using a margin of exposure (MOE) approach and target MOE of 1000, the operational results far exceeded the target MOE in this simulation study and in a previous workplace exposure study.ConclusionThe overall results indicate a no-risk concern level in the case of printed electronics using nanosilver ink.