Jingqi Tian

Self-Supported Nanoporous Cobalt Phosphide Nanowire Arrays: An Efficient 3D Hydrogen-Evolving Cathode over the Wide Range of pH 0-14

In this Communication, we report the topotactic fabrication of self-supported nanoporous cobalt phosphide nanowire arrays on carbon cloth (CoP/CC) via low-temperature phosphidation of the corresponding Co(OH)F/CC precursor. The CoP/CC, as a robust integrated 3D hydrogen-evolving cathode, shows a low onset overpotential of 38 mV and a small Tafel slope of 51 mV dec(-1), and it maintains its catalytic activity for at least 80,00 s in acidic media. It needs overpotentials (η) of 67, 100, and 204 mV to attain current densities of 10, 20, and 100 mA cm(-2), respectively. Additionally, this electrode offers excellent catalytic performance and durability under neutral and basic conditions.

Hydrothermal Treatment of Grass: A Low‐Cost, Green Route to Nitrogen‐Doped, Carbon‐Rich, Photoluminescent Polymer Nanodots as an Effective Fluorescent Sensing Platform for Label‐Free Detection of Cu(II) Ions

Increasing reaction temperature produces photoluminescent polymer nanodots (PPNDs) with decreased particle size and increased quantum yield. Such PPNDs are used as an effective fluorescent sensing platform for label-free sensitive and selective detection of Cu(II) ions with a detection limit as low as 1 nM. This method is successfully applied to determine Cu(2+) in real water samples.

Carbon Nanotubes Decorated with CoP Nanocrystals: A Highly Active Non-Noble-Metal Nanohybrid Electrocatalyst for Hydrogen Evolution†

The development of effective and inexpensive hydrogen evolution reaction (HER) electrocatalysts for future renewable energy systems is highly desired. The strongly acidic conditions in proton exchange membranes create a need for acid-stable HER catalysts. A nanohybrid that consists of carbon nanotubes decorated with CoP nanocrystals (CoP/CNT) was prepared by the low-temperature phosphidation of a Co3O4/CNT precursor. As a novel non-noble-metal HER catalyst operating in acidic electrolytes, the nanohybrid exhibits an onset overpotential of as low as 40 mV, a Tafel slope of 54 mV dec(-1), an exchange current density of 0.13 mA cm(-2), and a Faradaic efficiency of nearly 100 %. This catalyst maintains its catalytic activity for at least 18 hours and only requires overpotentials of 70 and 122 mV to attain current densities of 2 and 10 mA cm(-2), respectively.

Self-Supported Cu3P Nanowire Arrays as an Integrated High-Performance Three-Dimensional Cathode for Generating Hydrogen from Water†

Searching for inexpensive hydrogen evolution reaction (HER) electrocatalysts with high activity has attracted considerable research interest in the past years. Reported herein is the topotactic fabrication of self-supported Cu3 P nanowire arrays on commercial porous copper foam (Cu3 P NW/CF) from its Cu(OH)2 NW/CF precursor by a low-temperature phosphidation reaction. Remarkably, as an integrated three-dimensional hydrogen-evolving cathode operating in acidic electrolytes, Cu3 P NW/CF maintains its activity for at least 25 hours and exhibits an onset overpotential of 62 mV, a Tafel slope of 67 mV dec(-1) , and a Faradaic efficiency close to 100 %. Catalytic current density can approach 10 mA cm(-2) at an overpotential of 143 mV.

A Cost‐Effective 3D Hydrogen Evolution Cathode with High Catalytic Activity: FeP Nanowire Array as the Active Phase

Iron is the cheapest and one of the most abundant transition metals. Natural [FeFe]-hydrogenases exhibit remarkably high activity in hydrogen evolution, but they suffer from high oxygen sensitivity and difficulty in scale-up. Herein, an FeP nanowire array was developed on Ti plate (FeP NA/Ti) from its β-FeOOH NA/Ti precursor through a low-temperature phosphidation reaction. When applied as self-supported 3D hydrogen evolution cathode, the FeP NA/Ti electrode shows exceptionally high catalytic activity and good durability, and it only requires overpotentials of 55 and 127 mV to afford current densities of 10 and 100 mA cm(2) , respectively. The excellent electrocatalytic performance is promising for applications as non-noble-metal HER catalyst with a high performance-price ratio in electrochemical water splitting for large-scale hydrogen fuel production.

Ultrathin Graphitic Carbon Nitride Nanosheet: A Highly Efficient Fluorosensor for Rapid, Ultrasensitive Detection of Cu2+

A highly efficient fluorosensor based on ultrathin graphitic carbon nitride (g-C₃N₄) nanosheets for Cu(2+) was developed. In the absence of metal ions, the nanosheets exhibit high fluorescence; the strong coordination of the Lewis basic sites on them to metal ions, however, causes fluorescence quenching via photoinduced electron transfer leading to the qualitative and semiquantitative detection of metal ions. This fluorosensor exhibits high selectivity toward Cu(2+). The whole detection process can be completed within 10 min with a detection limit as low as 0.5 nM. The use of test paper enables the naked-eye detection of Cu(2+) with a detection limit of 0.1 nmol. The practical use of this sensor for Cu(2+) determination in real water samples was also demonstrated.

Au-Nanoparticle-Loaded Graphitic Carbon Nitride Nanosheets: Green Photocatalytic Synthesis and Application toward the Degradation of Organic Pollutants

Au nanoparticles (AuNPs) were loaded on graphitic carbon nitride (g-C3N4) nanosheets prepared by ultrasonication-assisted liquid exfoliation of bulk g-C3N4 via green photoreduction of Au(III) under visible light irradiation using g-C3N4 as an effective photocatalyst. The nanohybrids show superior photocatalytic activities for the decomposition of methyl orange under visible-light irradiation to bulk g-C3N4, g-C3N4 nanosheets, and AuNP/bulk g-C3N4 hybrids.

One-pot green synthesis of Ag nanoparticles-graphene nanocomposites and their applications in SERS, H2O2, and glucose sensing

In this contribution, we demonstrate a green, cost-effective, one-pot preparative route toward Ag nanoparticles-graphene (AgNPs–G) nanocomposites in aqueous solution with the use of tannic acid (TA), an environmentally friendly and water-soluble polyphenol, as a reducing agent. Such AgNPs–G nanocomposites were synthesized through one-pot reduction of AgNO3 and GO by TA. We investigated surface enhanced Raman scattering (SERS) and electrochemical properties of the resultant AgNPs–G nanocomposites. It is found that such AgNPs–G nanocomposites show excellent SERS activity as SERS substrates and exhibit notable catalytic performance toward the reduction of H2O2. This enzymeless H2O2 sensor has a fast amperometric response time of less than 2 s. The linear range is estimated to be from 1 × 10−4 M to 0.01 M (r = 0.999) and the detection limit is estimated to be 7 × 10−6 M at a signal-to-noise ratio of 3. A glucose biosensor was further fabricated by immobilizing glucose oxidase (GOD) into chitosan–AgNPs–G nanocomposite film on the surface of a glassy carbon electrode (GCE). This sensor exhibits good response to glucose, and the linear response range is estimated to be from 2 to 10 mM (R = 0.996) at −0.5 V. The detection limit of 100 μM was achieved at a signal-to-noise ratio of 3. More importantly, we demonstrate successfully its application for glucose detection in human blood serum.

Biomolecule-Assisted, Environmentally Friendly, One-Pot Synthesis of CuS/Reduced Graphene Oxide Nanocomposites with Enhanced Photocatalytic Performance

In this work, we develop a novel environmentally friendly strategy toward one-pot synthesis of CuS nanoparticle-decorated reduced graphene oxide (CuS/rGO) nanocomposites with the use of L-cysteine, an amino acid, as a reducing agent, sulfur donor, and linker to anchor CuS nanoparticles onto the surface of rGO sheets. Upon visible light illumination (λ > 400 nm), the CuS/rGO nanocomposites show pronounced enhanced photocurrent response and improved photocatalytic activity in the degradation of methylene blue (MB) compared to pure CuS. This could be attributed to the efficient charge transport of rGO sheets and hence reduced recombination rate of excited carriers.

Ultrathin graphitic carbon nitride nanosheets: a novel peroxidase mimetic, Fe doping-mediated catalytic performance enhancement and application to rapid, highly sensitive optical detection of glucose.

In this article, we demonstrate for the first time that ultrathin graphitic carbon nitride nanosheets (g-C3N4) possess peroxidase activity. Fe doping of the nanosheets leads to peroxidase mimetics with greatly enhanced catalytic performance and the mechanism involved is proposed. We further demonstrate the novel use of such Fe-g-C3N4 as a cheap nanosensor for simple, rapid, highly selective and sensitive optical detection of glucose with a pretty low detection limit of 0.5 μM.