Jinseong Lee

Flexible transition metal dichalcogenide nanosheets for band-selective photodetection.

The photocurrent conversions of transition metal dichalcogenide nanosheets are unprecedentedly impressive, making them great candidates for visible range photodetectors. Here we demonstrate a method for fabricating micron-thick, flexible films consisting of a variety of highly separated transition metal dichalcogenide nanosheets for excellent band-selective photodetection. Our method is based on the non-destructive modification of transition metal dichalcogenide sheets with amine-terminated polymers. The universal interaction between amine and transition metal resulted in scalable, stable and high concentration dispersions of a single to a few layers of numerous transition metal dichalcogenides. Our MoSe2 and MoS2 composites are highly photoconductive even at bending radii as low as 200 μm on illumination of near infrared and visible light, respectively. More interestingly, simple solution mixing of MoSe2 and MoS2 gives rise to blended composite films in which the photodetection properties were controllable. The MoS2/MoSe2 (5:5) film showed broad range photodetection suitable for both visible and near infrared spectra.

Solvent-Assisted Gel Printing for Micropatterning Thin Organic–Inorganic Hybrid Perovskite Films

While tremendous efforts have been made for developing thin perovskite films suitable for a variety of potential photoelectric applications such as solar cells, field-effect transistors, and photodetectors, only a few works focus on the micropatterning of a perovskite film which is one of the most critical issues for large area and uniform microarrays of perovskite-based devices. Here we demonstrate a simple but robust method of micropatterning a thin perovskite film with controlled crystalline structure which guarantees to preserve its intrinsic photoelectric properties. A variety of micropatterns of a perovskite film are fabricated by either microimprinting or transfer-printing a thin spin-coated precursor film in soft-gel state with a topographically prepatterned elastomeric poly(dimethylsiloxane) (PDMS) mold, followed by thermal treatment for complete conversion of the precursor film to a perovskite one. The key materials development of our solvent-assisted gel printing is to prepare a thin precursor film with a high-boiling temperature solvent, dimethyl sulfoxide. The residual solvent in the precursor gel film makes the film moldable upon microprinting with a patterned PDMS mold, leading to various perovskite micropatterns in resolution of a few micrometers over a large area. Our nondestructive micropatterning process does not harm the intrinsic photoelectric properties of a perovskite film, which allows for realizing arrays of parallel-type photodetectors containing micropatterns of a perovskite film with reliable photoconduction performance. The facile transfer of a micropatterned soft-gel precursor film on other substrates including mechanically flexible plastics can further broaden its applications to flexible photoelectric systems.

Printable and Rewritable Full Block Copolymer Structural Color

Structural colors (SCs) of photonic crystals (PCs) arise from selective constructive interference of incident light. Here, an ink-jet printable and rewritable block copolymer (BCP) SC display is demonstrated, which can be quickly written and erased over 50 times with resolution nearly equivalent to that obtained with a commercial office ink-jet printer. Moreover, the writing process employs an easily modified printer for position- and concentration-controlled deposition of a single, colorless, water-based ink containing a reversible crosslinking agent, ammonium persulfate. Deposition of the ink onto a self-assembled BCP PC film comprising a 1D stack of alternating layers enables differential swelling of the written BCP film and produces a full-colored SC display of characters and images. Furthermore, the information can be readily erased and the system can be reset by application of hydrogen bromide. Subsequently, new information can be rewritten, resulting in a chemically rewritable BCP SC display.

Flexible Nonvolatile Transistor Memory with Solution-Processed Transition Metal Dichalcogenides

Nonvolatile field-effect transistor (FET) memories containing transition metal dichalcogenide (TMD) nanosheets have been recently developed with great interest by utilizing some of the intriguing photoelectronic properties of TMDs. The TMD nanosheets are, however, employed as semiconducting channels in most of the memories, and only a few works address their function as floating gates. Here, a floating-gate organic-FET memory with an all-in-one floating-gate/tunneling layer of the solution-processed TMD nanosheets is demonstrated. Molybdenum disulfide (MoS2 ) is efficiently liquid-exfoliated by amine-terminated polystyrene with a controlled amount of MoS2 nanosheets in an all-in-one floating-gate/tunneling layer, allowing for systematic investigation of concentration-dependent charge-trapping and detrapping properties of MoS2 nanosheets. At an optimized condition, the nonvolatile memory exhibits memory performances with an ON/OFF ratio greater than 104 , a program/erase endurance cycle over 400 times, and data retention longer than 7 × 103 s. All-in-one floating-gate/tunneling layers containing molybdenum diselenide and tungsten disulfide are also developed. Furthermore, a mechanically-flexible TMD memory on a plastic substrate shows a performance comparable with that on a hard substrate, and the memory properties are rarely altered after outer-bending events over 500 times at the bending radius of 4.0 mm.

Controlled Nanopores in Thin Films of Nonstoichiometrically Supramolecularly Assembled Graft Copolymers

Herein, nanometer-scale morphologies of graft-copolymer-like supramolecular thin films, composed of sulfonic acid terminated polystyrene (SPS) and poly(2-vinylpyridine) (P2VP), and their application to antireflection coatings were investigated. The intermolecular complexes of SPS and P2VP, formed through nonstoichiometric multiple hydrogen bonding between the sulfonic acid group of SPS and the nitrogen atom in pyridine unit of P2VP, occurring in film deposition allowed for the formation of spherical micelles (with SPS and P2VP as the corona and core, respectively) in the thin film. Interestingly, the domain size of the micelles was tunable from approximately 20 to 90 nm on average by controlling either the blend ratio of components or the concentration of polymer solution. Furthermore, nanoporous thin films could be easily prepared by removing the core of micelle-based nanostructures by using a simple solvent etching process, leaving sulfonic acid groups on the surface of nanopores, which can be utilized as potential functional sites. Those resultant nanoporous thin films were conveniently employed as an antireflection layer on a glass substrate, giving a maximum 97.8 % transmittance in the visible wavelength range.

Prediction-Based Energy Saving Mechanism in 3GPP NB-IoT Networks

The current expansion of the Internet of things (IoT) demands improved communication platforms that support a wide area with low energy consumption. The 3rd Generation Partnership Project introduced narrowband IoT (NB-IoT) as IoT communication solutions. NB-IoT devices should be available for over 10 years without requiring a battery replacement. Thus, a low energy consumption is essential for the successful deployment of this technology. Given that a high amount of energy is consumed for radio transmission by the power amplifier, reducing the uplink transmission time is key to ensure a long lifespan of an IoT device. In this paper, we propose a prediction-based energy saving mechanism (PBESM) that is focused on enhanced uplink transmission. The mechanism consists of two parts: first, the network architecture that predicts the uplink packet occurrence through a deep packet inspection; second, an algorithm that predicts the processing delay and pre-assigns radio resources to enhance the scheduling request procedure. In this way, our mechanism reduces the number of random accesses and the energy consumed by radio transmission. Simulation results showed that the energy consumption using the proposed PBESM is reduced by up to 34% in comparison with that in the conventional NB-IoT method.

High performance thermal conduction of silver microparticles thermos-compressed in three-dimensionally interconnected polystyrene beads

We demonstrate a facile strategy to prepare polymer composite with anomalously increased thermal conductivity based on Ag network and structured polymer matrix. Conventional thermal compression process combined with colloidal type thermoplastic beads as structural matrix enabled efficient interconnected thermal conduction pathways of Ag microparticles, giving rise to extremely high thermal conductivity of 120 W/mK at 70 vol% of Ag particles comparable with one third of the value of pure Ag. The systematic investigation with different types of polymer matrix, such as thermoset epoxy and cross-linked colloidal bead, suggests that appropriate frictional force exerted on Ag particles with polymer matrix during compression is of prime importance for developing Ag conduction pathways. Furthermore, the thermoplastic PS beads matrix also provides sufficient mechanical strength to preserve the networked Ag pathways with firm interfaces.