Jitendra Kumar Das

Odia Braille: Text transcription via image processing

Braille-a model introduced to reduce the illiteracy rate among the visually challenged people. There has been a lot of scope for the conversion of English language to Braille but, the problem arises when the masses are unable to understand the communication by the visually challenged people. This paper focuses on the conversion of the Braille code representing Odia language(a language widely spoken in East India) into Odia word as text. For this, image processing using MATLAB technique provides a suitable platform to perform the segmentation of Braille cell for pattern selection and hence, Odia letter and word recognition. Braille Data Base creation acts as a storage system for the process and its accuracy is also tested which is explained in this paper.

Bearing Fault Detection and Classification Using ANC-Based Filtered Vibration Signal

The defective bearing in a rotating machine may affect its performance and hence reduce its efficiency. So the monitoring of bearing health and its fault diagnosis is essential. A vibration signature is one of the measuring parameters for fault detection. However, this vibration signature may get corrupted with noise. As a result this noise must be removed from the actual vibration signature before its analysis to detect and diagnose the fault. ANC (adaptive noise control)-based filtering techniques are used for this noise removal and hence to improve the SNR (signal-to-noise ratio). In our study an experimental setup is developed and then the proposed work is executed in three stages. In the first stage the vibration signatures are acquired and then ANC is implemented to remove the background noise. In the second stage the time (statistical) and the frequency analysis of the filtered vibration signals are done to detect the fault. In the third stage the statistical parameters of the vibration signatures are used for the classification of the fault present in the bearing using random forest and J48 classifiers.

Rolling element bearing condition monitoring using filtered acoustic emission

Zigbee technology has been developed for short range wireless sensor networks and it follows IEEE 802.15.4 standard. For such sensors, several considerations should be taken including; low data rate and less design complexity in order to achieve efficient performance considering to the transceiver systems. This research focuses on implementing a digital transceiver system for Zigbee sensor based on IEEE 802.15.4 . The system is implemented using offset quadrature phase shift keying (OQPSK) modulation technique with half sine pulse-shaping method. Direct conversion scheme has been used in the design of Zigbee receiver in order to fulfill the requirements mentioned above. System performance is analyzed considering to BER when it encountered adaptive white Gaussian noise (AWGN), besides showing the effect of using direct sequence spread spectrum (DSSS) technique.The inverted pendulum is an under-actuated and nonlinear system, which is also unstable. It is a single-input double-output system, where only one output is directly actuated. This paper investigates a single intelligent control system using an adaptive neuro-fuzzy inference system (ANFIS) to stabilize the inverted pendulum system while tracking the desired position. The non-linear inverted pendulum system was modelled and built using MATLAB Simulink. An adaptive neuro-fuzzy logic controller was implemented and its performance was compared with a Sugeno-fuzzy inference system in both simulation and real experiment. The ANFIS controller could reach its desired new destination in 1.5 s and could stabilize the entire system in 2.2 s in the simulation, while in the experiment it took 1.7 s to reach stability. Results from the simulation and experiment showed that ANFIS had better performance compared to the Sugeno-fuzzy controller as it provided faster and smoother response and much less steady-state error.Association Rule mining plays an important role in the discovery of knowledge and information. Association Rule mining discovers huge number of rules for any dataset for different support and confidence values, among this many of them are redundant, especially in the case of multi-level datasets. Mining non-redundant Association Rules in multi-level dataset is a big concern in field of Data mining. In this paper, we present a definition for redundancy and a concise representation called Reliable Exact basis for representing non-redundant Association Rules from multi-level datasets. The given non-redundant Association Rules are loss less representation for any datasets.This paper presents a novel technique for numeral reading in Indian language speech synthesis systems using the rule-based Concatenative speech synthesis technique. The model uses a set of rules to determine the context of the numeral pronunciation and is being integrated with the waveform concatenation technique to produce speech out of the input text in Indian languages. To analyze the performance of the proposed technique, a set of numerals are considered in different context and a comparison of the proposed technique with an existing numeral reading method is also presented to show the effectiveness of the proposed technique in producing intelligible speech out of the entered text.This paper presents a data processing system based on an architecture comprised of multiple stacked layers of computational processes that transforms Raw Binary Pollution Data com- ing directly from Two EUMETSAT Metop satellites to our servers, into ready to interpret and visualise continuous data stream in near real time using techniques varying from task automation, data preprocessing and data analysis to machine learning using feed forward ar- tificial neural networks. The proposed system handles the acquisition, cleaning, processing, normalizing, and predicting of Pollution Data in our area of interest of Morocco.Advanced Communication Systems are wideband systems to support multiple applications such as audio, video and data so and so forth. These systems require high spectral efficiency and data rates. In addition, they should provide multipath fading and inter-symbol interference (ISI) free transmission. Multiple input multiple output orthogonal frequency division multiplexing (MIMO OFDM) meets these requirements Hence, MIMO-OFDM is the most preferable technique for long term evaluation advanced (LTE-A). The primary objective of this paper is to control bit error rate (BER) by proper channel coding, pilot carriers, adaptive filter channel estimation schemes and space time coding (STC). A combination of any of these schemes results in better BER performance over individual schemes. System performance is analyzed for various digital modulation schemes. In this paper,adaptive filter channel estimated MIMO OFDM system is proposed by integrating channel coding, adaptivefilter channel estimation, digital modulation and space time coding. From the simulation results, channel estimated 2×2 MIMO OFDM system shows superior performance over individual schemes.Electricity markets are different from other markets as electricity generation cannot be easily stored in large amounts and in order to avoid blackouts, the generation of electricity must be balanced with customer demand for it on a second-by-second basis. Customers tend to rely on electricity for day-to-day living and cannot replace it easily so when electricity prices increase, customer demand generally does not reduce significantly in the short-term. As electricity generation and customer demand must be matched perfectly second-by-second, and because generation cannot be stored to a large extent, cost bids from generators must be balanced with demand estimates in advance of real-time. This paper outlines a a forecasting algorithm built on artificial neural networks in order to predict short-term (72 hours ahead) wholesale prices on the Irish Single Electricity Market so that market participants can make more informed trading decisions. Research studies have demonstrated that an adaptive or self-adaptive approach to forecasting would appear more suited to the task of predicting energy demands in territory such as Ireland. Implementing an in-house self-adaptive model should yield good results in the dynamic uncertain Irish energy market. We have identified the features that such a model demands and outline it here.Received May 2, 2018 Revised Jul 9, 2018 Accepted Aug 2, 2018 Zigbee technology has been developed for short range wireless sensor networks and it follows IEEE 802.15.4 standard. For such sensors, several considerations should be taken including; low data rate and less design complexity in order to achieve efficient performance considering to the transceiver systems. This research focuses on implementing a digital transceiver system for Zigbee sensor based on IEEE 802.15.4. The system is implemented using offset quadrature phase shift keying (OQPSK) modulation technique with half sine pulse-shaping method. Direct conversion scheme has been used in the design of Zigbee receiver in order to fulfill the requirements mentioned above. System performance is analyzed considering to BER when it encountered adaptive white Gaussian noise (AWGN), besides showing the effect of using direct sequence spread spectrum (DSSS) technique. Keyword:This paper presents the use of Simelectronics Program for modeling and control of a two degrees-of freedom coupled mass-spring-damper mechanical system.The aims of this paper are to establish a mathematical model that represents the dynamic behaviour of a coupled mass-spring damper system and effectively control the mass position using both Simulink and Simelectronics.The mathematical model is derived based on the augmented Lagrange equation and to simulate the dynamic accurately a PD controller is implemented to compensate for the oscillation sustained by the system as a result of the complex conjugate pair poles near to the imaginary axis.The input force has been subjected to an obstacle to mimic actual challenges and to validate the mathematical model a Simulink and Simelectronics models were developed, consequently, the results of the models were compared. According to the result analysis, the controller tracked the position errors and stabilized the positions to zero within a settling time of 6.5sec and significantly reduced the overshoot by 99.5% and 99. 7% in Simulink and Simelectronics respectively. Furthermore, it is found that Simelectronics model proved to be capable having advantages of simplicity, less time-intense and requires no mathematical model over the Simulink approach.

Effectiveness of High Permittivity Spacer for Underlap Regions of Wavy-Junctionless FinFET at 22 nm Node and Scaling Short Channel Effects

In this work, an attempt has been made to investigate the performance of a new device, Wavy Junctionless FinFET at 22 nm node using low to high permittivity spacer for underlap regions. An alternative V TH extraction method has been demonstrated, which signifies the importance of cannel length at the nanoscale regime. The device layer Silicon film possesses uniform doping profile, where the current is controlled by channel doping and the mobility of charge carriers which account the bulk conduction instead of surface conduction. Due to the scalability of device dimensions, underlap regions are preferred to differentiate the control and the location of dopant atoms along the conduction region and hence this enhances the device performances. The simulation results enlighten the effectiveness of high permittivity of spacer region through performance evaluation. The simulated results exhibit an SS of 64 mV/decade, DIBL of 26 mV/V and I ON/I OFF ratio of 107.