Joe E. Baio

Multifunctionality and mechanical origins: Ballistic jaw propulsion in trap-jaw ants

Extreme animal movements are usually associated with a single, high-performance behavior. However, the remarkably rapid mandible strikes of the trap-jaw ant, Odontomachus bauri, can yield multiple functional outcomes. Here we investigate the biomechanics of mandible strikes in O. bauri and find that the extreme mandible movements serve two distinct functions: predation and propulsion. During predatory strikes, O. bauri mandibles close at speeds ranging from 35 to 64 m·s−1 within an average duration of 0.13 ms, far surpassing the speeds of other documented ballistic predatory appendages in the animal kingdom. The high speeds of the mandibles assist in capturing prey, while the extreme accelerations result in instantaneous mandible strike forces that can exceed 300 times the ant’s body weight. Consequently, an O. bauri mandible strike directed against the substrate produces sufficient propulsive power to launch the ant into the air. Changing head orientation and strike surfaces allow O. bauri to use the trap-jaw mechanism to capture prey, eject intruders, or jump to safety. This use of a single, simple mechanical system to generate a suite of profoundly different behavioral functions offers insights into the morphological origins of novelties in feeding and locomotion.

Probing the Orientation of Surface-Immobilized Protein G B1 Using ToF-SIMS Sum Frequency Generation and NEXAFS Spectroscopy

The ability to orient active proteins on surfaces is a critical aspect of many medical technologies. An important related challenge is characterizing protein orientation in these surface films. This study uses a combination of time-of-flight secondary ion mass spectrometry (ToF-SIMS), sum frequency generation (SFG) vibrational spectroscopy, and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy to characterize the orientation of surface-immobilized Protein G B1, a rigid 6 kDa domain that binds the Fc fragment of IgG. Two Protein G B1 variants with a single cysteine introduced at either end were immobilized via the cysteine thiol onto maleimide-oligo(ethylene glycol)-functionalized gold and bare gold substrates. X-ray photoelectron spectroscopy was used to measure the amount of immobilized protein, and ToF-SIMS was used to measure the amino acid composition of the exposed surface of the protein films and to confirm covalent attachment of protein thiol to the substrate maleimide groups. SFG and NEXAFS were used to characterize the ordering and orientation of peptide or side chain bonds. On both substrates and for both cysteine positions, ToF-SIMS data showed enrichment of mass peaks from amino acids located at the end of the protein opposite to the cysteine surface position as compared with nonspecifically immobilized protein, indicating end-on protein orientations. Orientation on the maleimide substrate was enhanced by increasing pH (7.0-9.5) and salt concentration (0-1.5 M NaCl). SFG spectral peaks characteristic of ordered α-helix and β-sheet elements were observed for both variants but not for cysteine-free wild type protein on the maleimide surface. The phase of the α-helix and β-sheet peaks indicated a predominantly upright orientation for both variants, consistent with an end-on protein binding configuration. Polarization dependence of the NEXAFS signal from the N 1s to π* transition of β-sheet peptide bonds also indicated protein ordering, with an estimated tilt angle of inner β-strands of 40-50° for both variants (one variant more tilted than the other), consistent with SFG results. The combined results demonstrate the power of using complementary techniques to probe protein orientation on surfaces.

Linkage mechanics and power amplification of the mantis shrimp's strike

SUMMARY Mantis shrimp (Stomatopoda) generate extremely rapid and forceful predatory strikes through a suite of structural modifications of their raptorial appendages. Here we examine the key morphological and kinematic components of the raptorial strike that amplify the power output of the underlying muscle contractions. Morphological analyses of joint mechanics are integrated with CT scans of mineralization patterns and kinematic analyses toward the goal of understanding the mechanical basis of linkage dynamics and strike performance. We test whether a four-bar linkage mechanism amplifies rotation in this system and find that the rotational amplification is approximately two times the input rotation, thereby amplifying the velocity and acceleration of the strike. The four-bar model is generally supported, although the observed kinematic transmission is lower than predicted by the four-bar model. The results of the morphological, kinematic and mechanical analyses suggest a multi-faceted mechanical system that integrates latches, linkages and lever arms and is powered by multiple sites of cuticular energy storage. Through reorganization of joint architecture and asymmetric distribution of mineralized cuticle, the mantis shrimps raptorial appendage offers a remarkable example of how structural and mechanical modifications can yield power amplification sufficient to produce speeds and forces at the outer known limits of biological systems.

NHC-Based Self-Assembled Monolayers on Solid Gold Substrates

Thin films of 1,3-diethylbenzimidazol-2-ylidene (BIEt) were fabricated from THF solution on solid gold substrates and characterised by high-resolution X-ray photoelectron and near-edge X-ray absorption fine structure spectroscopy. The surface-analytical data are in accord with the formation of self-assembled monolayers of BIEt molecules exhibiting an approximately vertical orientation on the substrate. The crystal structure of (BIEt)(2) was also determined.

Effects of self-assembled monolayer structural order, surface homogeneity and surface energy on pentacene morphology and thin film transistor device performance

A systematic study of six phosphonic acid (PA) self-assembled monolayers (SAMs) with tailored molecular structures is performed to evaluate their effectiveness as dielectric modifying layers in organic field-effect transistors (OFETs) and determine the relationship between SAM structural order, surface homogeneity, and surface energy in dictating device performance. SAM structures and surface properties are examined by near edge X-ray absorption fine structure (NEXAFS) spectroscopy, contact angle goniometry, and atomic force microscopy (AFM). Top-contact pentacene OFET devices are fabricated on SAM modified Si with a thermally grown oxide layer as a dielectric. For less ordered methyl- and phenyl-terminated alkyl ~(CH2)12 PA SAMs of varying surface energies, pentacene OFETs show high charge carrier mobilities up to 4.1 cm2 V-1 s-1. It is hypothesized that for these SAMs, mitigation of molecular scale roughness and subsequent control of surface homogeneity allow for large pentacene grain growth leading to high performance pentacene OFET devices. PA SAMs that contain bulky terminal groups or are highly crystalline in nature do not allow for a homogenous surface at a molecular level and result in charge carrier mobilities of 1.3 cm2 V-1 s-1 or less. For all molecules used in this study, no causal relationship between SAM surface energy and charge carrier mobility in pentacene FET devices is observed.

Probing the Orientation of Electrostatically Immobilized Protein G B1 by Time-of-Flight Secondary Ion Spectrometry, Sum Frequency Generation, and Near-Edge X-ray Adsorption Fine Structure Spectroscopy

To fully develop techniques that provide an accurate description of protein structure at a surface, we must start with a relatively simple model system before moving to increasingly complex systems. In this study, X-ray photoelectron spectroscopy (XPS), sum frequency generation spectroscopy (SFG), near-edge X-ray adsorption fine structure (NEXAFS) spectroscopy, and time-of-flight secondary ion mass spectrometry (ToF-SIMS) were used to probe the orientation of Protein G B1 (6 kDa) immobilized onto both amine (NH(3)(+)) and carboxyl (COO(-)) functionalized gold. Previously, we have shown that we could successfully control orientation of a similar Protein G fragment via a cysteine-maleimide bond. In this investigation, to induce opposite end-on orientations, a charge distribution was created within the Protein G B1 fragment by first substituting specific negatively charged amino acids with neutral amino acids and then immobilizing the protein onto two oppositely charged self-assembled monolayer (SAM) surfaces (NH(3)(+) and COO(-)). Protein coverage, on both surfaces, was monitored by the change in the atomic % N, as determined by XPS. Spectral features within the SFG spectra, acquired for the protein adsorbed onto a NH(3)(+)-SAM surface, indicates that this electrostatic interaction does induce the protein to form an oriented monolayer on the SAM substrate. This corresponded to the polarization dependence of the spectral feature related to the NEXAFS N(1s)-to-π* transition of the β-sheet peptide bonds within the protein layer. ToF-SIMS data demonstrated a clear separation between the two samples based on the intensity differences of secondary ions stemming from amino acids located asymmetrically within Protein G B1 (methionine: 62 and 105 m/z; tyrosine: 107 and 137 m/z; leucine: 86 m/z). For a more quantitative examination of orientation, we developed a ratio comparing the sum of the intensities of secondary-ions stemming from the amino acid residues at either end of the protein. The 2-fold increase in this ratio, observed between the protein covered NH(3)(+) and COO(-) SAMs, indicates opposite orientations of the Protein G B1 fragment on the two different surfaces.

Hexadecadienyl Monolayers on Hydrogen-Terminated Si(111): Faster Monolayer Formation and Improved Surface Coverage Using the Enyne Moiety

To further improve the coverage of organic monolayers on hydrogen-terminated silicon (H-Si) surfaces with respect to the hitherto best agents (1-alkynes), it was hypothesized that enynes (H-C≡C-HC═CH-R) would be even better reagents for dense monolayer formation. To investigate whether the increased delocalization of β-carbon radicals by the enyne functionality indeed lowers the activation barrier, the kinetics of monolayer formation by hexadec-3-en-1-yne and 1-hexadecyne on H-Si(111) were followed by studying partially incomplete monolayers. Ellipsometry and static contact angle measurements indeed showed a faster increase of layer thickness and hydrophobicity for the hexadec-3-en-1-yne-derived monolayers. This more rapid monolayer formation was supported by IRRAS and XPS measurements that for the enyne show a faster increase of the CH2 stretching bands and the amount of carbon at the surface (C/Si ratio), respectively. Monolayer formation at room temperature yielded plateau values for hexadec-3-en-1-yne and 1-hexadecyne after 8 and 16 h, respectively. Additional experiments were performed for 16 h at 80° to ensure full completion of the layers, which allows comparison of the quality of both layers. Ellipsometry thicknesses (2.0 nm) and contact angles (111-112°) indicated a high quality of both layers. XPS, in combination with DFT calculations, revealed terminal attachment of hexadec-3-en-1-yne to the H-Si surface, leading to dienyl monolayers. Moreover, analysis of the Si2p region showed no surface oxidation. Quantitative XPS measurements, obtained via rotating Si samples, showed a higher surface coverage for C16 dienyl layers than for C16 alkenyl layers (63% vs 59%). The dense packing of the layers was confirmed by IRRAS and NEXAFS results. Molecular mechanics simulations were undertaken to understand the differences in reactivity and surface coverage. Alkenyl layers show more favorable packing energies for surface coverages up to 50-55%. At higher coverages, this packing energy rises quickly, and there the dienyl packing becomes more favorable. When the binding energies are included the difference becomes more pronounced, and dense packing of dienyl layers becomes more favorable by 2-3 kcal/mol. These combined data show that enynes provide the highest-quality organic monolayers reported on H-Si up to now.

Covalently Attached Organic Monolayers onto Silicon Carbide from 1-Alkynes: Molecular Structure and Tribological Properties

In order to achieve improved tribological and wear properties at semiconductor interfaces, we have investigated the thermal grafting of both alkylated and fluorine-containing ((C(x)F(2x+1))-(CH2)n-) 1-alkynes and 1-alkenes onto silicon carbide (SiC). The resulting monolayers display static water contact angles up to 120°. The chemical composition of the covalently bound monolayers was studied by X-ray photoelectron spectroscopy (XPS), infrared reflection-absorption spectroscopy (IRRAS), and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. These techniques indicate the presence of acetal groups at the organic-inorganic interface of alkyne-modified SiC surfaces. The tribological properties of the resulting organic monolayers with fluorinated or nonfluorinated end groups were explored using atomic force microscopy (AFM). It was found that the fluorinated monolayers exhibit a significant reduction of adhesion forces, friction forces, and wear resistance compared with non-fluorinated molecular coatings and especially bare SiC substrates. The successful combination of hydrophobicity and excellent tribological properties makes these strongly bound, fluorinated monolayers promising candidates for application as a thin film coating in high-performance microelectronic devices.

Direct Observation of Phenylalanine Orientations in Statherin Bound to Hydroxyapatite Surfaces

Extracellular biomineralization proteins such as salivary statherin control the growth of hydroxyapatite (HAP), the principal component of teeth and bones. Despite the important role that statherin plays in the regulation of hard tissue formation in humans, the surface recognition mechanisms involved are poorly understood. The protein-surface interaction likely involves very specific contacts between the surface atoms and the key protein side chains. This study demonstrates for the first time the power of combining near-edge X-ray absorption fine structure (NEXAFS) spectroscopy with element labeling to quantify the orientation of individual side chains. In this work, the 15 amino acid N-terminal binding domain of statherin has been adsorbed onto HAP surfaces, and the orientations of phenylalanine rings F7 and F14 have been determined using NEXAFS analysis and fluorine labels at individual phenylalanine sites. The NEXAFS-derived phenylalanine tilt angles have been verified with sum frequency generation spectroscopy.

Zwitterionic dithiocarboxylates derived from N-heterocyclic carbenes: coordination to gold surfaces

The zwitterionic dithiocarboxylates 1(+)-CS(2)(-)-4(+)-CS(2)(-) were prepared by reacting the corresponding N-heterocyclic carbenes 1,3-bis(2,6-diisoproylphenyl)imidazol-2-ylidene (1), 1,3-diisopropylimidazol-2-ylidene (2), 1,3-dibenzylimidazol-2-ylidene (3) and 1,3-diethylbenzimidazol-2-ylidene (4) with CS(2). In the latter two cases, the corresponding N-heterocylic carbene was generated in situ. Compounds 2(+)-CS(2)(-)-4(+)-CS(2)(-) were structurally characterised by single-crystal X-ray diffraction studies. The chemisorption of these zwitterionic dithiocarboxylates on solid gold substrates was investigated in situ and in real time by optical second harmonic generation (SHG). The resulting thin films were exemplarily characterised by near-edge X-ray absorption fine structure (NEXAFS) spectroscopy and X-ray photoelectron spectroscopy (XPS) in the case of 1(+)-CS(2)(-) and 2(+)-CS(2)(-), revealing the formation of almost contamination-free self-assembled monolayers, which exhibit a remarkable degree of orientational order.