Johannes Kaschke

Tailored 3D Mechanical Metamaterials Made by Dip‐in Direct‐Laser‐Writing Optical Lithography

Dip-in direct-laser-writing (DLW) optical lithography allows fabricating complex three-dimensional microstructures without the height restrictions of regular DLW. Bow-tie elements assembled into mechanical metamaterials with positive/zero/negative Poissons ratio and with sufficient overall size for direct mechanical characterization aim at demonstrating the new possibilities with respect to rationally designed effective materials.

Tapered gold-helix metamaterials as improved circular polarizers

We have previously shown that square arrays of three-dimensional gold helices can serve as compact broadband circular polarizers. Here, we show by heuristic reasoning supported by numerical calculations that the bandwidth of the device can realistically be increased to 1.5 octaves by tapering the gold-helix radius. The tapering also improves the extinction ratio. Depending on the side from which light impinges onto the tapered helices, the polarization conversions are different. Therefore, the structure is either optimal as polarizer or as analyzer. Corresponding structures for the infrared spectral range are fabricated by direct laser writing and gold electroplating.

On metamaterial circular polarizers based on metal N-helices

Polarization conversion of metal-helix based metamaterials can be eliminated by recovering four-fold rotational symmetry. Symmetry considerations and current progress in the fabrication of N-helix optical metamaterials as broadband circular polarizers is presented.

Three-dimensional multi-photon direct laser writing with variable repetition rate

We perform multi-photon direct laser writing as a function of laser repetition rate over many orders of magnitude and otherwise unchanged experimental conditions. These new data serve as basis for investigating the influence of different proposed mechanisms involved in the photopolymerization: two-photon absorption, photoionization, avalanche ionization and heat accumulation. We find different non-linearities for high and low repetition rates consistent with different initiation processes being involved. The scaling of the resulting linewidths, however, is neither expected nor found to depend on repetition rate or non-linearity.

Three-dimensional quantum photonic elements based on single nitrogen vacancy-centres in laser-written microstructures

To fully integrate quantum optical technology, active quantum systems must be combined with resonant microstructures and optical interconnects harvesting and routing photons in three diemsnsions (3D) on one chip. We fabricate such combined structures for the first time by using two-photon laser lithography and a photoresist containing nanodiamonds including nitrogen vacancy-centers. As an example for possible functionality, single-photon generation, collection, and transport is successfully accomplished. The single photons are efficiently collected via resonators and routed in 3D through waveguides, all on one optical chip. Our one-step fabrication scheme is easy to implement, scalable and flexible. Thus, other complex assemblies of 3D quantum optical structures are feasible as well.

Gold triple-helix mid-infrared metamaterial by STED-inspired laser lithography.

In analogy to wire-grid polarizers for linear polarization, metal-helix metamaterials can act as broadband circular polarizers. This concept has brought circular-polarization capabilities to mid-infrared and terahertz frequencies, which were previously difficult to access. Due to the lack of rotational symmetry, however, single-helix metamaterials exhibit unwanted circular-polarization conversions. Recent theoretical work showed that conversions can be fully eliminated by intertwining N=3 or 4 helices within each unit cell. While direct laser writing in positive-tone photo-resist yielded good results for single-helix metamaterials operating at mid-infrared frequencies, the axial resolution is insufficient for N-helix metamaterials. Here, we use stimulated emission depletion-inspired three-dimensional laser lithography to fabricate such microstructures. We measure all entries of the Jones transmission and reflection matrices and show experimentally that polarization conversions are minimized, in good agreement with theory.

Three‐Dimensional Microscaffolds Exhibiting Spatially Resolved Surface Chemistry

Spatial control over the surface chemistry of 3D organic-inorganic hybrid microscaffolds is achieved by a two-photon-triggered cycloaddition. Following a coating step with photoactivatable dienes via silanization, surface irradiation with a femtosecond-pulsed laser in the presence of functional dienophiles enables a site-selective alteration of the surface chemistry. Bioconjugation with fluorescent protein tags is employed to reveal the 3D molecular patterns.

Tapered N-helical metamaterials with three-fold rotational symmetry as improved circular polarizers.

Chiral helix-based metamaterials can potentially serve as compact and broadband circular polarizers. We have recently shown that the physics of structures composed of multiple intertwined helices, so called N-helices with N being an integer multiple of 4, is distinct from that of structures made of single circular helices (N = 1). In particular, undesired circular polarization conversion is strictly eliminated for N = 4 helices arranged on a square lattice. However, the fabrication of such structures for infrared/visible operation wavelengths still poses very significant challenges. Thus, we here revisit the possibility of reducing N from 4 to 3, which would ease micro-fabrication considerably. We show analytically that N = 3 helices arranged on a hexagonal lattice exhibit strictly vanishing circular polarization conversion. N = 3 is the smallest option as N = 2 obviously leads to linear birefringence. To additionally improve the circular-polarizer operation bandwidth and the extinction ratio while maintaining high transmission for the wanted polarization and zero conversion, we also investigate by numerical calculations N = 3 helices with tapered diameter along the helix axis. We find operation bandwidths as large as 2.4 octaves.

Ink-Jet-Printed Organic Semiconductor Distributed Feedback Laser

Ink-jet-printed organic distributed feedback (DFB) lasers are realized by employing light-emitting copolymer and suitable organic solvents to meet the demands of printability and optical amplification in a nanopatterned conjugated polymer slab waveguide. We demonstrate the accurate lateral positioning of ink-jet-printed patches of the gain material on a polymer substrate with 500×500 µm2 grating areas. We also printed patches of large lateral dimension of 6 mm2 on a silica grating. The high uniformity of the film thickness leads to a laser wavelength variation of less than 3 nm over the whole area.

Optical and Infrared Helical Metamaterials

Abstract By tailoring metamaterials with chiral unit cells, giant optical activity and strong circular dichroism have been achieved successfully over the past decade. Metamaterials based on arrays of metal helices have revolutionized the field of chiral metamaterials, because of their capability of exhibiting these pronounced chiro-optical effects over previously unmatched bandwidths. More recently, a large number of new metamaterial designs based on metal helices have been introduced with either optimized optical performance or other chiro-optical properties for novel applications. The fabrication of helical metamaterials is, however, challenging and even more so with growing complexity of the metamaterial designs. As conventional two-dimensional nanofabrication methods, for example, electron-beam lithography, are not well suited for helical metamaterials, the development of novel three-dimensional fabrication approaches has been triggered. Here, we will discuss the theory for helical metamaterials and the principle of operation. We also review advancements in helical metamaterial design and their limitations and influence on optical performance. Furthermore, we will compare novel nano- and microfabrication techniques that have successfully yielded metallic helical metamaterials. Finally, we also discuss recently presented applications of helical metamaterials extending beyond the use of far-field circular polarizers.