John Hackett

The Perils of Pathogen Discovery: Origin of a Novel Parvovirus-Like Hybrid Genome Traced to Nucleic Acid Extraction Spin Columns

ABSTRACT Next-generation sequencing was used for discovery and de novo assembly of a novel, highly divergent DNA virus at the interface between the Parvoviridae and Circoviridae. The virus, provisionally named parvovirus-like hybrid virus (PHV), is nearly identical by sequence to another DNA virus, NIH-CQV, previously detected in Chinese patients with seronegative (non-A-E) hepatitis. Although we initially detected PHV in a wide range of clinical samples, with all strains sharing ∼99% nucleotide and amino acid identity with each other and with NIH-CQV, the exact origin of the virus was eventually traced to contaminated silica-binding spin columns used for nucleic acid extraction. Definitive confirmation of the origin of PHV, and presumably NIH-CQV, was obtained by in-depth analyses of water eluted through contaminated spin columns. Analysis of environmental metagenome libraries detected PHV sequences in coastal marine waters of North America, suggesting that a potential association between PHV and diatoms (algae) that generate the silica matrix used in the spin columns may have resulted in inadvertent viral contamination during manufacture. The confirmation of PHV/NIH-CQV as laboratory reagent contaminants and not bona fide infectious agents of humans underscores the rigorous approach needed to establish the validity of new viral genomes discovered by next-generation sequencing.

Impact of Human Immunodeficiency Virus Type 1 (HIV-1) Genetic Diversity on Performance of Four Commercial Viral Load Assays: LCx HIV RNA Quantitative, AMPLICOR HIV-1 MONITOR v1.5, VERSANT HIV-1 RNA 3.0, and NucliSens HIV-1 QT

ABSTRACT Human immunodeficiency virus type 1 (HIV-1) evolution and changing strain distribution present a challenge to nucleic acid-based assays. Reliable patient monitoring of viral loads requires the detection and accurate quantification of genetically diverse HIV-1. A panel of 97 HIV-1-seropositive plasma samples collected from Cameroon, Brazil, and South Africa was used to compare the performance of four commercially available HIV RNA quantitative tests: Abbott LCx HIV RNA Quantitative assay (LCx), Bayer Versant HIV-1 RNA 3.0 (bDNA), Roche AMPLICOR HIV-1 MONITOR v1.5 (Monitor v1.5), and bioMérieux NucliSens HIV-1 QT (NucliSens). The panel included group M, group O, and recombinant viruses based on sequence analysis of gag p24, pol integrase, and env gp41. The LCx HIV assay quantified viral RNA in 97 (100%) of the samples. In comparison, bDNA, Monitor v1.5, and NucliSens quantified viral RNA in 96.9%, 94.8%, and 88.6% of the samples, respectively. The two group O specimens were quantified only by the LCx HIV assay. Analysis of nucleotide mismatches at the primer/probe binding sites for Monitor v1.5, NucliSens, and LCx assays revealed that performance characteristics reflected differences in the level of genetic conservation within the target regions.

Assessment of the Ability of a Fourth-Generation Immunoassay for Human Immunodeficiency Virus (HIV) Antibody and p24 Antigen To Detect both Acute and Recent HIV Infections in a High-Risk Setting

ABSTRACT An immunoassay (IA) that simultaneously detects both antibody to human immunodeficiency virus (HIV) and HIV p24 antigen (Architect HIV Ag/Ab Combo) was evaluated for its ability to detect HIV infection by using a panel of specimens collected from individuals recently infected with HIV type 1 (HIV-1). This IA was found to be capable of detecting the majority (89%) of infections, including 80% of those considered acute infections based on the presence of HIV RNA and the lack of detectable antibody to HIV. Substantial improvements in detection of recent infections by the Architect HIV Ag/Ab Combo relative to previous generations of IAs as well as the capacity to detect acute infections have important implications for HIV prevention strategies.

Performance of the Celera Diagnostics ViroSeq HIV-1 Genotyping System for Sequence-Based Analysis of Diverse Human Immunodeficiency Virus Type 1 Strains

ABSTRACT The Celera Diagnostics ViroSeq HIV-1 Genotyping System is a Food and Drug Administration-cleared, integrated system for sequence-based analysis of drug resistance mutations in subtype B human immunodeficiency virus type 1 (HIV-1) protease and reverse transcriptase (RT). We evaluated the performance of this system for the analysis of diverse HIV-1 strains. Plasma samples were obtained from 126 individuals from Uganda, Cameroon, South Africa, Argentina, Brazil, and Thailand with viral loads ranging from 2.92 to >6.0 log10 copies/ml. HIV-1 genotyping was performed with the ViroSeq system. HIV-1 subtyping was performed by using phylogenetic methods. PCR products suitable for sequencing were obtained for 125 (99%) of the 126 samples. Genotypes including protease (amino acids 1 to 99) and RT (amino acids 1 to 321) were obtained for 124 (98%) of the samples. Full bidirectional sequence data were obtained for 95 of those samples. The sequences were categorized into the following subtypes: A1/A2 (16 samples), B (12 samples), C (13 samples), D (11 samples), CRF01_AE (9 samples), F/F2 (9 samples), G (7 samples), CRF02_AG (32 samples), H (1 sample), and intersubtype recombinant (14 samples). The performances of the individual sequencing primers were examined. Genotyping of duplicate samples in a second laboratory was successful for 124 of the 126 samples. The identity level for the sequence data from two laboratories ranged from 98 to 100% (median, 99.8%). The ViroSeq system performs well for the analysis of plasma samples with diverse non-B subtypes. The availability of this genotyping system should facilitate studies of HIV-1 drug resistance in non-subtype B strains of HIV-1.

The prevalence of diverse HIV-1 strains was stable in Cameroonian blood donors from 1996 to 2004.

Objective:The HIV epidemic in Cameroon is characterized by a high level of strain diversity despite a relatively low prevalence of infection. In this study, HIV strains infecting blood donors in Cameroon were characterized to determine the prevalence of subtypes and intersubtype recombinants and if strain prevalence was changing over time. Methods:From 1996 through 2004, 676 HIV-infected blood donations were collected at blood banks in Douala and Yaoundé, Cameroon. A subset of the HIV-1 group M strains (n = 574) were classified based on phylogenetic analysis of viral sequences from the gag p24, pol integrase, and env gp41 regions. Results:HIV-1 group M accounted for 97.3% (n = 658) of infections, whereas group O was present in 2.2% (n = 15) and HIV-2 in 0.4% (n = 3). Within the group M infections, 14 subtypes and circulating recombinant forms (CRFs) and unique recombinant forms (URFs) were identified. Overall, CRF02_AG accounted for 58.2% of infections, URFs 14.8%, and levels of subtypes, A, B, C, D, F2, and G, and CRFs, 01, 06, 09, 11, 13, 22, and 37, varied from 0.2% to 6.1%. Evaluation of HIV strains present in the donor population over this 9-year period showed no substantial changes in the proportion of infections caused by each subtype and CRF, the percentage of intersubtype recombinants, or the strain composition of the URFs. Conclusions:HIV-1 strain diversity in Cameroon did not significantly change, suggesting a mature and relatively stable epidemic.

Thermodynamically modulated partially double-stranded linear DNA probe design for homogeneous real-time PCR

Real-time PCR assays have recently been developed for diagnostic and research purposes. Signal generation in real-time PCR is achieved with probe designs that usually depend on exonuclease activity of DNA polymerase (e.g. TaqMan probe) or oligonucleotide hybridization (e.g. molecular beacon). Probe design often needs to be specifically tailored either to tolerate or to differentiate between sequence variations. The conventional probe technologies offer limited flexibility to meet these diverse requirements. Here, we introduce a novel partially double-stranded linear DNA probe design. It consists of a hybridization probe 5′-labeled with a fluorophore and a shorter quencher oligo of complementary sequence 3′-labeled with a quencher. Fluorescent signal is generated when the hybridization probe preferentially binds to amplified targets during PCR. This novel class of probe can be thermodynamically modulated by adjusting (i) the length of hybridization probe, (ii) the length of quencher oligo, (iii) the molar ratio between the two strands and (iv) signal detection temperature. As a result, pre-amplification signal, signal gain and the extent of mismatch discrimination can be reliably controlled and optimized. The applicability of this design strategy was demonstrated in the Abbott RealTime HIV-1 assay.

Molecular characterization of 39 HIV-1 isolates representing group M (subtypes A-G) and group O: Sequence analysis of gag p24, pol integrase, and env gp41

A panel of genetically diverse, well-characterized human immunodeficiency type 1 (HIV-1) virus isolates is a valuable tool for standardizing nucleic acid-based tests. Since HIV quantitative assays target different regions of the genome, thorough molecular characterization is useful for evaluating the effect of genetic variation on viral load assay performance. In this study, 39 virus isolates were examined. The representative HIV-1 group M subtypes A-G and group O strains included 30 members of the Walter Reed Army Institute of Research (WRAIR) clade panel. Though this panel is currently being used in laboratories around the world, only limited sequence information is available on most of these isolates. In this communication, gag p24 (gag), pol integrase (pol IN), and env gp41 immunodominant (IDR) region sequences were characterized to assess the level of genetic diversity and to verify group/subtype. The panel was composed of 37 group M and two group O strains.

Comparative Performance of Three Viral Load Assays on Human Immunodeficiency Virus Type 1 (HIV-1) Isolates Representing Group M (Subtypes A to G) and Group O: LCx HIV RNA Quantitative, AMPLICOR HIV-1 MONITOR Version 1.5, and Quantiplex HIV-1 RNA Version 3.0

ABSTRACT The performance of the LCx HIV RNA Quantitative (LCx HIV), AMPLICOR HIV-1 MONITOR version 1.5 (MONITOR v1.5), and Quantiplex HIV-1 RNA version 3.0 (bDNA v3.0) viral load assays was evaluated with 39 viral isolates (3 A, 7 B, 6 C, 4 D, 8 E, 4 F, 1 G, 4 mosaic, and 2 group O). Quantitation across the assay dynamic ranges was assessed using serial fivefold dilutions of the viruses. In addition, sequences ofgag-encoded p24 (gag p24),pol-encoded integrase, and env-encoded gp41 were analyzed to assign group and subtype and to assess nucleotide mismatches at primer and probe binding sites. For group M isolates, quantification was highly correlated among all three assays. In contrast, only the LCx HIV assay reliably quantified group O isolates. The bDNA v3.0 assay detected but consistently underquantified group O viruses, whereas the MONITOR v1.5 test failed to detect group O viruses. Analysis of target regions revealed fewer primer or probe mismatches in the LCx HIV assay than in the MONITOR v1.5 test. Consistent with the high level of nucleotide conservation is the ability of the LCx HIV assay to quantify efficiently human immunodeficiency virus type 1 group M and the genetically diverse group O.

Detection of individuals with acute HIV-1 infection using the ARCHITECT HIV Ag/Ab combo assay.

Background:We evaluated use of the ARCHITECT HIV Ag/Ab Combo assay (HIV Combo; Abbott Diagnostics; available for sale outside the United States only) for detection of acute HIV infection. Methods:Samples were obtained from a behavioral intervention study (EXPLORE). HIV-uninfected men who have sex with men were enrolled and tested for HIV infection every 6 months. Samples from seroconverters collected at their last seronegative visit (n = 217) were tested individually using 2 HIV RNA assays. Samples with detectable HIV RNA were classified as acute and were tested with HIV Combo. Samples from the enrollment visit (n = 83) and the time of HIV seroconversion (n = 219) were tested with HIV Combo as controls. Results:Twenty-one samples (9.7%) from the last seronegative visit had detectable HIV RNA and were classified as acute. HIV Combo was positive for 13 of the acute samples (61.9%). Samples not detected by HIV Combo had viral loads of 724-15,130 copies per milliliter. Expected results were obtained for positive and negative controls tested with HIV Combo. Conclusions:HIV Combo detected nearly two thirds of acute HIV infections identified in this high-risk population by non-pooled HIV RNA assays. HIV Combo may be useful for high-throughput screening to identify individuals with acute HIV infection.

Quantification of HIV-1 group M (subtypes A-G) and group O by the LCx HIV RNA quantitative assay.

Human immunodeficiency virus type 1 (HIV-1) genetic diversity presents a challenge to nucleic acid-based assays with regard to sensitivity of detection and accuracy of quantification. The Abbott LCx HIV RNA Quantitative assay (LCx(R) HIV assay), a competitive RT-PCR targeting the pol integrase region, was evaluated using a panel of 297 HIV-1 seropositive plasma samples from Cameroon, Uganda, Brazil, Thailand, Spain, Argentina and South Africa. The panel included group M subtypes A-G, mosaics, and group O based on sequence analysis of gag p24, pol integrase, and env gp41. The LCx HIV assay quantified 290 (97.6%) of the samples, including all the group O samples tested. In comparison, the Roche AMPLICOR HIV-1 MONITOR test versions 1.0 and 1.5 quantified 67.3 and 94.6% of the samples, respectively. No group O specimens were quantified by either version of AMPLICOR HIV-1 MONITOR. Seven specimens were below the detectable limits of all the three assays. The LCx HIV assay had fewer nucleotide mismatches at primer/probe binding sites as compared with both AMPLICOR HIV-1 MONITOR tests. The high degree of nucleotide conservation within the pol target region enables the LCx HIV assay to efficiently quantify the HIV-1 subtypes A-G and the most genetically diverse HIV-1, group O.