John W. Lyons

Development of high temperature comprehensive two-dimensional liquid chromatography hyphenated with infrared and light scattering detectors for characterization of chemical composition and molecular weight heterogeneities in polyolefin copolymers.

The application of high temperature comprehensive two-dimensional (2D) liquid chromatography for quantitative characterization of chemical composition and molecular weight (MW) heterogeneities in polyolefins is demonstrated in this study by separating a physical blend of isotactic-polypropylene, ethylene-random-propylene copolymer, and high density polyethylene. The first dimension separation is based on adsorption liquid chromatography that fractionates the blend from low to high ethylene content. The second dimension is size-exclusion chromatography connected with light scattering (LS) and infrared (IR) detectors. The IR detector shows desired sensitivity and linearity for monitoring analyte concentrations in the eluent after 2D separations. In addition, the compositions of the analytes are also determined from the ratio of two IR absorbances at the specified wavelength regions, an absorbance for measuring the level of methyl groups in polyolefins and another absorbance for measuring concentration. The LS detector is used to determine absolute molecular weight of the analytes from the ratio of the light scattering signal to the IR concentration signal. The ability to obtain concentration, chemical composition, and MW of polyolefins after 2D separation provides new opportunities to discover structure-property relationships for polyolefins with complex structures/architectures.

Recent advances in polymer separations

Methods for the characterization of polymers using advanced separation technology are presented here, focussing on adsorption liquid chromatography, pyrolysis gas chromatography, and flow injection polymer analysis. The Figure shows a plot of the bivariate Stockmayer copolymer distribution—information that can be obtained experimentally by adsorption liquid chromatography.

Fundamental study of the separation of homopolymers from block copolymers by liquid chromatography with preloaded adsorption promoting barriers

A fundamental study of the separation of homopolymers from polystyrene-block-polymethylmethacrylate (PS-b-PMMA) by liquid chromatography with preloaded discrete and continuous adsorption promoting barriers was performed. The impact of barrier composition on the separation of block copolymers (BCP) was studied by a dual detection (ultraviolet (UV) and evaporated light scattering (ELSD) detectors) system that enabled monitoring both barrier composition and BCP separation simultaneously. The separation of homopolymers from BCP by preloaded discrete adsorption promoting barriers was validated via a series of control experiments by blending known amounts of homopolymers PS or PMMA with PS-b-PMMA, and the resulting chromatograms were free from co-elution of homopolymers and BCP. Quantitation of homopolymers and BCP by ELSD was also demonstrated. The influence of BCP chemical composition on the separation by preloaded discrete adsorption promoting barriers was investigated. Results showed a PS-b-PMMA having 90wt% PMMA co-eluted with homopolymer PMMA, whereas PS-b-PMMA samples having lower amounts of PMMA block could be separated from homopolymer PMMA, successfully. Attempts at using a preloaded solvent gradient for separating homopolymers from block copolymers were unsuccessful. UV detection of the solvent gradient revealed significant deviation in solvent composition compared to the nominally loaded gradient. This deviation was due to the interaction of strong desorption solvent with column stationary phase. As such, the barrier composition in the preloaded gradient method was not as expected. Therefore, one can obtain undesired separation results by preloaded solvent gradients.

Size-exclusion chromatography of ultrahigh molecular weight methylcellulose ethers and hydroxypropyl methylcellulose ethers for reliable molecular weight distribution characterization.

Size-exclusion chromatography (SEC) coupled with multi-angle laser light scattering (MALLS) and differential refractive index (DRI) detectors was employed for determination of the molecular weight distributions (MWD) of methylcellulose ethers (MC) and hydroxypropyl methylcellulose ethers (HPMC) having weight-average molecular weights (Mw) ranging from 20 to more than 1,000kg/mol. In comparison to previous work involving right-angle light scattering (RALS) and a viscometer for MWD characterization of MC and HPMC, MALLS yields more reliable molecular weight for materials having weight-average molecular weights (Mw) exceeding about 300kg/mol. A non-ideal SEC separation was observed for cellulose ethers with Mw>800kg/mol, and was manifested by upward divergence of logM vs. elution volume (EV) at larger elution volume at typical SEC flow rate such as 1.0mL/min. As such, the number-average molecular weight (Mn) determined for the sample was erroneously large and polydispersity (Mw/Mn) was erroneously small. This non-ideality resulting in the late elution of high molecular weight chains could be due to the elongation of polymer chains when experimental conditions yield Deborah numbers (De) exceeding 0.5. Non-idealities were eliminated when sufficiently low flow rates were used. Thus, using carefully selected experimental conditions, SEC coupled with MALLS and DRI can provide reliable MWD characterization of MC and HPMC covering the entire ranges of compositions and molecular weights of commercial interest.

The Structural Evolution of Pore Formation in Low‐k Dielectric Thin Films

Specular x‐ray reflectivity and small angle neutron scattering were used to characterize changes in the porosity, pore size and pore size distribution on processing a polymeric low‐k material filled with 21.6 volume percent of a deuterated porogen with an average radius of 56 A. Processing yielded a decrease in porosity to about 11 %, an increase in average pore radius to 83 A, and a narrower pore size distribution. A sample with an unusual pore structure could be easily identified.