Jon H. Wahl

Sheathless capillary electrophoresis-electrospray ionization mass spectrometry using 10 μm I.D. capillaries: Analyses of tryptic digests of cytochrome c

The analyses of tryptic digest of proteins present a difficult challenge to the analytical chemist due to the wide range of molecular masses and hydrophobicities of the peptides produced. In this study, we demonstrate the separation of tryptic digests of bovine, Candida krusei and equine cytochrome c using a new electrospray ionization (ESI) interface for CE-MS that does not require additional sheath make-up fluid or mechanical assistance to aid the ESI process. The utility of this new CE-ESI-MS interface is demonstrated using a 10 microm I.D. CE capillary where the injected sample amounts are in the 30 femtomole (of protein) region. The CE electroosmotic flow rates when aminopropylamine treated capillaries are utilized are in the 10 nl/min region for a relatively conductive buffer system (0.01 M ammonium acetate-acetic acid buffer system, pH 4.4 and a 300 V/cm field strength).

Impurity Profiling of a Chemical Weapon Precursor for Possible Forensic Signatures by Comprehensive Two-Dimensional Gas Chromatography/Mass Spectrometry and Chemometrics

In this report we present the feasibility of using analytical and chemometric methodologies to reveal and exploit the chemical impurity profiles from commercial dimethyl methylphosphonate (DMMP) samples to illustrate the type of forensic information that may be obtained from chemical-attack evidence. Using DMMP as a model compound of a toxicant that may be used in a chemical attack, we used comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry (GC x GC/TOF-MS) to detect and identify trace organic impurities in six samples of commercially acquired DMMP. The GC x GC/TOF-MS data was analyzed to produce impurity profiles for all six DMMP samples using 29 analyte impurities. The use of PARAFAC for the mathematical resolution of overlapped GC x GC peaks ensured clean spectra for the identification of many of the detected analytes by spectral library matching. The use of statistical pairwise comparison revealed that there were trace impurities that were quantitatively similar and different among five of the six DMMP samples. Two of the DMMP samples were revealed to have identical impurity profiles by this approach. The use of nonnegative matrix factorization indicated that there were five distinct DMMP sample types as illustrated by the clustering of the multiple DMMP analyses into five distinct clusters in the scores plots. The two indistinguishable DMMP samples were confirmed by their chemical supplier to be from the same bulk source. Sample information from the other chemical suppliers supported the idea that the other four DMMP samples were likely from different bulk sources. These results demonstrate that the matching of synthesized products from the same source is possible using impurity profiling. In addition, the identified impurities common to all six DMMP samples provide strong evidence that basic route information can be obtained from impurity profiles. Finally, impurities that may be unique to the sole bulk manufacturer of DMMP were found in some of the DMMP samples.

Individual odortypes: interaction of MHC and background genes

Genes of the major histocompatibility complex (MHC) influence the urinary odors of mice. Behavioral studies have shown (1) that mice differing only at MHC have distinct urinary odors, suggesting an MHC odor phenotype or odortype; (2) that the MHC odortype can be recognized across different background strains; and (3) that the MHC odortype is not an additive trait. Very little is known about the odorants underlying this behavioral phenotype. We compared urinary volatile profiles of two MHC haplotypes (H2b and H2k) and their heterozygous cross (H2b×H2k) for two different background strains (C57BL/6J and BALB/c) using solid phase micro-extraction (SPME) headspace analysis and gas chromatography/mass spectrometry (GC/MS). Both MHC and background genes substantially influence the volatile profile. Of 148 compounds screened, 108 of them significantly differ between the six genotypes. Surprisingly, for numerous compounds, their MHC associations are moderated by background genes (i.e., there is a significant MHC × background interaction effect in the statistical model relating genotype to relative compound concentration). These interactions account for nearly 30% of the total genetic effect on the volatile profile. MHC heterozygosity further extends the odortype diversity. For many compounds, the volatile expression for the heterozygote is more extreme than the expression for either homozygote, suggesting a heterozygous-specific odortype. The remarkable breadth of effects of MHC variation on concentrations of metabolites and the interaction between MHC and other genetic variation implies the existence of as yet unknown processes by which variation in MHC genes gives rise to variation in volatile molecules in body fluids.

Capillary electrophoresis fourier transform ion cyclotron resonance mass spectrometry with sustained off-resonance irradiation for the characterization of protein and peptide mixtures

A new approach to protein and peptide analysis that involves the coupling of on-line capillary electrophoresis-electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry with a variation of sustained off-resonance irradiation is described. With this technique, multiple irradiation frequencies are broadcast simultaneously, which yields fragmentation of species at different mass-to-charge ratio values from the same waveform. In conjunction with capillary electrophoresis, this technique can provide sequence information from small amounts of proteins or peptides in complex mixtures. Initial results obtained from a mixture of gramicidin S (1141 u), bee venom melittin (2845 u), and equine apomyoglobin (16,951 u) are presented.

A study of the thermal denaturation of ribonuclease S by electrospray ionization mass spectrometry.

The thermal stability of ribonuclease S (RNase S), an enzymatically active noncovalent complex composed of a 2166-u peptide (S-peptide) and a 11,534-u protein (S-protein), was investigated by electrospray ionization mass spectrometry (ESI-MS) and capillary electrophoresis ESI-MS (CE-ESI-MS). The intensities of peaks corresponding to the RNase S complex were inversely related to both the applied nozzle-skimmer (or capillary-skimmer) voltage bias in the atmosphere-vacuum interface and the temperature of the RNase S solution. By using a heated metal capillary-skimmer interface and a room temperature solution of RNase S, the intensities of RNase S molecular ion peaks were observed to decrease with increasing metal capillary temperature. Mass spectrometric studies with both the nozzle-skimmer and capillary-skimmer interface designs allowed determination of phenomenological enthalpies for dissociation of the RNase S complex in both solution and for the electrosprayed microdroplet-gas phase species. Intact RNase S complex could also be detected with CE-ESI-MS separations by using a 10-mM ammonium bicarbonate (pH 7.9) solution as the electrophoretic buffer. These studies provide new insights into the stability of multiply charged noncovalent complexes in the gas phase and the mass spectrometric conditions required for such studies, and suggest that information regarding solution properties can be obtained by ESI-MS.

Capillary electrophoresis-mass spectrometry.

Publisher Summary As with any separation technique, the power of capillary electrophoresis (CE), in macromolecular characterization, often depends on the nature of the detector. This chapter discusses the instrumentation, methods, and advantages of the combination of this high resolution separation technique, with equally powerful mass spectrometric (MS) methods. This chapter discusses the methods, experimental considerations, and selected applications for CE-MS interfacing methods, based on electrospray ionization (ESI). It emphasizes CE separations, by free-solution electrophoresis— that is, capillary zone electrophoresis (CZE) and, to a lesser extent, capillary isotachophoresis (CITP). This chapter describes the explosive growth in ESI applications, the increasing availability of such instrumentation, the compatibility with MS methods, capable of providing extensive structural information, and the belief that the ESI interface is currently the method of choice for CE-MS, owing to its sensitivity, versatility, and ease of implementation. Finally, describes clearly the current status of CE-MS, a highly promising combination, but still somewhat limited, by the sensitivity and scan-speed constraints of conventional quadrupole mass spectrometers. It shows some of the steps that can be taken to mitigate the limitations of conventional mass spectrometers and describes new instrumental approaches that should allow the full potential of the CE-MS combination to be more fully realized.

Detection of agar, by analysis of sugar markers, associated with Bacillus anthracis spores, after culture.

Detection of small quantities of agar associated with spores of Bacillus anthracis could provide key information regarding its source or growth characteristics. Agar, widely used in growth of bacteria on solid surfaces, consists primarily of repeating polysaccharide units of 3,6-anhydro-l-galactose (AGal) and galactose (Gal) with sulfated and O-methylated galactoses present as minor constituents. Two variants of the alditol acetate procedure were evaluated for detection of potential agar markers associated with spores. The first method employed a reductive hydrolysis step, to stabilize labile anhydrogalactose, by converting to anhydrogalactitol. The second eliminated the reductive hydrolysis step simplifying the procedure. Anhydrogalactitol, derived from agar, was detected using both derivatization methods followed by gas chromatography-mass spectrometry (GC-MS) analysis. However, challenges with artifactual background (reductive hydrolysis) or marker destruction (hydrolysis) respectively lead to the use of an alternative agar marker. A minor agar component, 6-O-methyl galactose (6-O-M gal), was readily detected in agar-grown but not broth-grown bacteria. Detection was optimized by the use of gas chromatography-tandem mass spectrometry (GC-MS-MS). With appropriate choice of sugar marker and analytical procedure, detection of sugar markers for agar has considerable potential in microbial forensics.

Profiling of volatile impurities in tetramethylenedisulfotetramine (TETS) for synthetic-route determination

This study investigated the feasibility of using volatile impurities from the rodenticide tetramethylenedisulfotetramine (TETS) for the discrimination of TETS produced by three synthetic routes. Each route was used to make one batch of TETS by reacting sulfamide with one of three formaldehyde analogs in the presence of either trifluroacetic acid (TFA) or hydrochloric acid. Ten impurities useful for differentiating the three TETS batches were discovered and tentatively identified by headspace solid-phase microextraction comprehensive two-dimensional gas chromatography-mass spectrometry (HS-SPME/GC×CG-MS). Of the ten identified impurities, the alkyl trifluoroacetate and alkyl chloride impurities distinguished TETS routes based on their use of either TFA or HCl as catalyst. On the other hand, four 6-carbon ketone impurities appeared to be batch specific rather than route specific and hence potentially useful for sample matching. Interestingly, 1,3,5-trioxane was not found in the TETS batch where it was used as a reactant, but instead was found in the two batches that did not have 1,3,5-trioxane as the reactant. In brief, the limited work discussed in this paper supports: (1) the feasibility of sampling and detecting volatile organic impurities from a solid chemical-threat agent, (2) the probable forensic benefit of catalysts acting as reactants in side reactions, (3) the uniqueness of a synthetic batchs impurity profile for potential sample matching, and (4) the possibility that some impurities, such as formaldehyde analogs, are not forensically helpful and may lead to an incorrect estimate about the synthetic route if not supported by sound chemical knowledge.

New developments in microscale separations and mass spectrometry for biomonitoring: Capillary electrophoresis and electrospray ionization mass spectrometry

In this article, we briefly highlight the use of capillary electrophoresis for sampling, manipulating, and separating extremely small sample sizes. The extraordinary sensitivity that can be obtained by combined capillary electrophoresis-mass spectrometry is then demonstrated using recent results. We briefly describe the ability to detect noncovalently associated complexes (e.g., double-stranded DNA) by electrospray ionization-mass spectrometry, and conclude with recent results that show the potential for using high-resolution Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry for characterization of biomolecules.

Preliminary effects of real-world factors on the recovery and exploitation of forensic impurity profiles of a nerve-agent simulant from office media ☆

Dimethyl methylphosphonate (DMMP) was used as a chemical threat agent (CTA) simulant for a first look at the effects of real-world factors on the recovery and exploitation of a CTAs impurity profile for source matching. Four stocks of DMMP having different impurity profiles were disseminated as aerosols onto cotton, painted wall board, and nylon coupons according to a thorough experimental design. The DMMP-exposed coupons were then solvent extracted and analyzed for DMMP impurities by comprehensive 2D gas chromatography/mass spectrometry (GC×GC/MS). The similarities between the coupon DMMP impurity profiles and the known (reference) DMMP profiles were measured by dot products of the coupon profiles and known profiles and by score values obtained from principal component analysis. One stock, with a high impurity-profile selectivity value of 0.9 out of 1, had 100% of its respective coupons correctly classified and no false positives from other coupons. Coupons from the other three stocks with low selectivity values (0.0073, 0.012, and 0.018) could not be sufficiently distinguished from one another for reliable matching to their respective stocks. The results from this work support that: (1) extraction solvents, if not appropriately selected, can have some of the same impurities present in a CTA reducing a CTAs useable impurity profile, (2) low selectivity among a CTAs known impurity profiles will likely make definitive source matching impossible in some real-world conditions, (3) no detrimental chemical-matrix interference was encountered during the analysis of actual office media, (4) a short elapsed time between release and sample storage is advantageous for the recovery of the impurity profile because it minimizes volatilization of forensic impurities, and (5) forensic impurity profiles weighted toward higher volatility impurities are more likely to be altered by volatilization following CTA exposure.