Jonathan C. Barnes

A Radically Configurable Six-State Compound

Radically Organic Metals such as manganese are relatively stable over a wide range of oxidation states. In contrast, purely organic compounds are rarely susceptible to incremental addition or removal of electrons without accompanying fragmentation or coupling reactions. Barnes et al. (p. 429; see the Perspective by Benniston) report a catenane (a compound comprising interlocked rings) in which the topological structure stabilizes six different states that successively differ by the presence or absence of one or two electrons in the framework. The hepta-oxidized state proved remarkably resilient to oxygen exposure. An interlocked-rings topology stabilizes a wide range of collective oxidation states in a metal-free organic compound. [Also see Perspective by Benniston] Most organic radicals possess short lifetimes and quickly undergo dimerization or oxidation. Here, we report on the synthesis by radical templation of a class of air- and water-stable organic radicals, trapped within a homo[2]catenane composed of two rigid and fixed cyclobis(paraquat-p-phenylene) rings. The highly energetic octacationic homo[2]catenane, which is capable of accepting up to eight electrons, can be configured reversibly, both chemically and electrochemically, between each one of six experimentally accessible redox states (0, 2+, 4+, 6+, 7+, and 8+) from within the total of nine states evaluated by quantum mechanical methods. All six of the observable redox states have been identified by electrochemical techniques, three (4+, 6+, and 7+) have been characterized by x-ray crystallography, four (4+, 6+, 7+, and 8+) by electron paramagnetic resonance spectroscopy, one (7+) by superconducting quantum interference device magnetometry, and one (8+) by nuclear magnetic resonance spectroscopy.

Iterative exponential growth of stereo- and sequence-controlled polymers

Chemists have long sought sequence-controlled synthetic polymers that mimic natures biopolymers, but a practical synthetic route that enables absolute control over polymer sequence and structure remains a key challenge. Here, we report an iterative exponential growth plus side-chain functionalization (IEG+) strategy that begins with enantiopure epoxides and facilitates the efficient synthesis of a family of uniform >3 kDa macromolecules of varying sequence and stereoconfiguration that are coupled to produce unimolecular polymers (>6 kDa) with sequences and structures that cannot be obtained using traditional polymerization techniques. Selective side-chain deprotection of three hexadecamers is also demonstrated, which imbues each compound with the ability to dissolve in water. We anticipate that these new macromolecules and the general IEG+ strategy will find broad application as a versatile platform for the scalable synthesis of sequence-controlled polymers.

Induced-fit catalysis of corannulene bowl-to-bowl inversion

Stereoelectronic complementarity between the active site of an enzyme and the transition state of a reaction is one of the tenets of enzyme catalysis. This report illustrates the principles of enzyme catalysis (first proposed by Pauling and Jencks) through a well-defined model system that has been fully characterized crystallographically, computationally and kinetically. Catalysis of the bowl-to-bowl inversion processes that pertain to corannulene is achieved by combining ground-state destabilization and transition-state stabilization within the cavity of an extended tetracationic cyclophane. This synthetic receptor fulfils a role reminiscent of a catalytic antibody by stabilizing the planar transition state for the bowl-to-bowl inversion of (ethyl)corannulene (which accelerates this process by a factor of ten at room temperature) by an induced-fit mechanism first formulated by Koshland.

Ultrafast Conformational Dynamics of Electron Transfer in ExBox4+⊂Perylene

Multielectron acceptors are essential components for artificial photosynthetic systems that must deliver multiple electrons to catalysts for solar fuels applications. The recently developed boxlike cyclophane incorporating two extended viologen units joined end-to-end by two p-phenylene linkers-namely, ExBox(4+)-has a potential to be integrated into light-driven systems on account of its ability to complex with π-electron-rich guests such as perylene, which has been utilized to great extent in many light-harvesting applications. Photodriven electron transfer to ExBox(4+) has not previously been investigated, however, and so its properties, following photoreduction, are largely unknown. Here, we investigate the structure and energetics of the various accessible oxidation states of ExBox(4+) using a combination of spectroscopy and computation. In particular, we examine photoinitiated electron transfer from perylene bound within ExBox(4+) (ExBox(4+)⊂perylene) using visible and near-infrared femtosecond transient absorption (fsTA) spectroscopy. The structure and conformational relaxation dynamics of ExBox(3+)⊂perylene(+) are observed with femtosecond stimulated Raman spectroscopy (FSRS). From the fsTA and FSRS spectra, we observe that the central p-phenylene spacer in one of the extended viologen units on one side of the cyclophane becomes more coplanar with its neighboring pyridinium units over the first ∼5 ps after photoreduction. When the steady-state structure of chemically generated ExBox(2+) is investigated using Raman spectroscopy, it is found to have the central p-phenylene rings in both of its extended viologen units rotated to be more coplanar with their neighboring pyridinium units, further underscoring the importance of this subunit in the stabilization of the reduced states of ExBox(4+).

A reversible light-operated nanovalve on mesoporous silica nanoparticles

Two azobenzene α-cyclodextrin based nanovalves are designed, synthesized and assembled on mesoporous silica nanoparticles. Under aqueous conditions, the cyclodextrin cap is tightly bound to the azobenzene moiety and capable of holding back loaded cargo molecules. Upon irradiation with a near-UV light laser, trans to cis-photoisomerization of azobenzene initiates a dethreading process, which causes the cyclodextrin cap to unbind followed by the release of cargo. The addition of a bulky stopper to the end of the stalk allows this design to be reversible; complete dethreading of cyclodextrin as a result of unbinding with azobenzene is prevented as a consequence of steric interference. As a result, thermal relaxation of cis- to trans-azobenzene allows for the rebinding of cyclodextrin and resealing of the nanopores, a process which entraps the remaining cargo. Two stalks were designed with different lengths and tested with alizarin red S and propidium iodide. No cargo release was observed prior to light irradiation, and the system was capable of multiuse. On/off control was also demonstrated by monitoring the release of cargo when the light stimulus was applied and removed, respectively.

Synthesis of ExnBox Cyclophanes

A rapid and efficient synthesis of the extended bipyridinium-based class of cyclophanes--that is, Ex(n)Box(4+) (n = 0-3), where n is the number of p-phenylene rings inserted between the pyridinium rings--is demonstrated, resulting in much higher yields of products along with a reduced output of oligomeric byproducts. Although each cyclophane can be synthesized readily without the use of a precise stoichiometric amount of template, ExBox(4+) can be prepared in 66% yield (following crystallization) using six equivalents of pyrene in a template-directed protocol. This new methodology has been employed to synthesize, in modest yield, a nearly 2.5 nm long cyclophane consisting of 12 aromatic rings.

Mechanically induced intramolecular electron transfer in a mixed-valence molecular shuttle

The kinetics and thermodynamics of intramolecular electron transfer (IET) can be subjected to redox control in a bistable [2]rotaxane comprised of a dumbbell component containing an electron-rich 1,5-dioxynaphthalene (DNP) unit and an electron-poor phenylene-bridged bipyridinium (P-BIPY2+) unit and a cyclobis (paraquat-p-phenylene) (CBPQT4+) ring component. The [2]rotaxane exists in the ground-state co-conformation (GSCC) wherein the CBPQT4+ ring encircles the DNP unit. Reduction of the CBPQT4+ leads to the CBPQT2(•+) diradical dication while the P-BIPY2+ unit is reduced to its P-BIPY•+ radical cation. A radical-state co-conformation (RSCC) results from movement of the CBPQT2(•+) ring along the dumbbell to surround the P-BIPY•+ unit. This shuttling event induces IET to occur between the pyridinium redox centers of the P-BIPY•+ unit, a property which is absent between these redox centers in the free dumbbell and in the 1∶1 complex formed between the CBPQT2(•+) ring and the radical cation of methyl-phenylene-viologen (MPV•+). Using electron paramagnetic resonance (EPR) spectroscopy, the process of IET was investigated by monitoring the line broadening at varying temperatures and determining the rate constant (kET = 1.33 × 107 s-1) and activation energy (ΔG‡ = 1.01 kcal mol-1) for electron transfer. These values were compared to the corresponding values predicted, using the optical absorption spectra and Marcus–Hush theory.

Iterative Exponential Growth Synthesis and Assembly of Uniform Diblock Copolymers

Studies on the phase segregation of unimolecular block copolymers (BCPs) are limited by a lack of reliable, versatile methods for the synthesis of such polymers on the preparative scale. Herein, we describe an advancement of Iterative Exponential Growth (IEG) wherein chiral allyl-based IEG oligomers are subjected to thiol-ene reactions and converted into unimolecular BCPs. With this strategy we have synthesized uniform BCPs with molar masses up to 12.1 kDa on ∼1 g scale. BCPs composed of decane-based side chains and either triethyleneglycol- or thioglycerol-based side chains phase-segregate into hexagonal cylinder morphologies. The assembly is not driven by side-chain crystallization, but is instead the result of amorphous BCP assembly.

Measurement of the ground-state distributions in bistable mechanically interlocked molecules using slow scan rate cyclic voltammetry

In donor–acceptor mechanically interlocked molecules that exhibit bistability, the relative populations of the translational isomers—present, for example, in a bistable [2]rotaxane, as well as in a couple of bistable [2]catenanes of the donor–acceptor vintage—can be elucidated by slow scan rate cyclic voltammetry. The practice of transitioning from a fast scan rate regime to a slow one permits the measurement of an intermediate redox couple that is a function of the equilibrium that exists between the two translational isomers in the case of all three mechanically interlocked molecules investigated. These intermediate redox potentials can be used to calculate the ground-state distribution constants, K. Whereas, (i) in the case of the bistable [2]rotaxane, composed of a dumbbell component containing π-electron-rich tetrathiafulvalene and dioxynaphthalene recognition sites for the ring component (namely, a tetracationic cyclophane, containing two π-electron-deficient bipyridinium units), a value for K of 10 ± 2 is calculated, (ii) in the case of the two bistable [2]catenanes—one containing a crown ether with tetrathiafulvalene and dioxynaphthalene recognition sites for the tetracationic cyclophane, and the other, tetrathiafulvalene and butadiyne recognition sites—the values for K are orders (one and three, respectively) of magnitude greater. This observation, which has also been probed by theoretical calculations, supports the hypothesis that the extra stability of one translational isomer over the other is because of the influence of the enforced side-on donor–acceptor interactions brought about by both π-electron-rich recognition sites being part of a macrocyclic polyether.

Semiconducting single crystals comprising segregated arrays of complexes of C60

Although pristine C60 prefers to adopt a face-centered cubic packing arrangement in the solid state, it has been demonstrated that noncovalent-bonding interactions with a variety of molecular receptors lead to the complexation of C60 molecules, albeit usually with little or no control over their long-range order. Herein, an extended viologen-based cyclophane—ExBox2(4+)—has been employed as a molecular receptor which, not only binds C60 one-on-one, but also results in the columnar self-assembly of the 1:1 inclusion complexes under ambient conditions. These one-dimensional arrays of fullerenes stack along the long axis of needle-like single crystals as a consequence of multiple noncovalent-bonding interactions between each of the inclusion complexes. The electrical conductivity of these crystals is on the order of 10(-7) S cm(-1), even without any evacuation of oxygen, and matches the conductivity of high-quality, unfunctionalized C60-based materials that typically require stringent high-temperature vaporization techniques, along with the careful removal of oxygen and moisture, prior to measuring their conductance.