Jonathan Hartman

Prototype laser-activated shape memory polymer foam device for embolic treatment of aneurysms

Conventional embolization of cerebral aneurysms using detachable coils is time-consuming and often requires retreatment. These drawbacks have prompted the development of new methods of aneurysm occlusion. We present the fabrication and laser deployment of a shape memory (SMP) polymer expanding foam device. Data acquired in an in vitro basilar aneurysm model with and without flow showed successful treatment, with the flow rate affecting foam expansion and the temperature at the aneurysm wall.

Effect of Prophylactic Transluminal Balloon Angioplasty on Cerebral Vasospasm and Outcome in Patients With Fisher Grade III Subarachnoid Hemorrhage Results of a Phase II Multicenter, Randomized, Clinical Trial

Background and Purpose— Cerebral vasospasm continues to be a major cause of poor outcome in patients with ruptured aneurysms. Prophylactic Transluminal Balloon Angioplasty (pTBA) appeared to prevent delayed ischemic neurological deficit in a pilot study. A phase II multicenter randomized clinical trial was subsequently designed. Methods— One hundred and seventy patients with Fisher Grade III subarachnoid hemorrhage were enrolled in the study. Of these, 85 patients were randomized to the treatment group and underwent pTBA within 96 hours after subarachnoid hemorrhage. Main end points of the study included the 3-month dichotomized Glasgow Outcome Score (GOS), development of delayed ischemic neurological deficit (DIND), occurrence of Transcranial Doppler (TCD) vasospasm, and length of stay in the ICU and hospital. Results— The incidence of DIND was lower in the pTBA group (P=0.30) and fewer patients required therapeutic angioplasty to treat DIND (P=0.03). Overall pTBA resulted in an absolute risk reduction of 5.9% and a relative risk reduction of 10.4% unfavorable outcome (P=0.54). Good grade patients had absolute and relative risk reductions of respectively 9.5 and 29.4% (P=0.73). Length of stay in ICU and hospital was similar in both groups. Four patients had a procedure-related vessel perforation, of which three patients died. Conclusions— While the trial is unsuccessful as defined by the primary end point (GOS), proof of concept is confirmed by these results. Fewer patients tend to develop vasospasm after treatment with pTBA and there is a statistically significantly decreased need for therapeutic angioplasty. pTBA does not improve the poor outcome of patients with Fisher grade III subarachnoid hemorrhage.

Shape Memory Polymer Stent With Expandable Foam: A New Concept for Endovascular Embolization of Fusiform Aneurysms

We demonstrate a new concept for endovascular embolization of nonnecked fusiform aneurysms. A device prototype consisting of a stent augmented with expandable foam, both made from shape memory polymer, was fabricated and deployed in an in vitro model. Visual observation indicated that the foam achieved embolization of the aneurysm while the stent maintained an open lumen in the parent artery. The shape memory polymer stent-foam device is a potential tool for treatment of nonnecked fusiform aneurysms, as well as an alternative to stent- and balloon-assisted coil embolization of wide-necked aneurysms

Fabrication and in vitro deployment of a laser-activated shape memory polymer vascular stent

BackgroundVascular stents are small tubular scaffolds used in the treatment of arterial stenosis (narrowing of the vessel). Most vascular stents are metallic and are deployed either by balloon expansion or by self-expansion. A shape memory polymer (SMP) stent may enhance flexibility, compliance, and drug elution compared to its current metallic counterparts. The purpose of this study was to describe the fabrication of a laser-activated SMP stent and demonstrate photothermal expansion of the stent in an in vitro artery model.MethodsA novel SMP stent was fabricated from thermoplastic polyurethane. A solid SMP tube formed by dip coating a stainless steel pin was laser-etched to create the mesh pattern of the finished stent. The stent was crimped over a fiber-optic cylindrical light diffuser coupled to an infrared diode laser. Photothermal actuation of the stent was performed in a water-filled mock artery.ResultsAt a physiological flow rate, the stent did not fully expand at the maximum laser power (8.6 W) due to convective cooling. However, under zero flow, simulating the technique of endovascular flow occlusion, complete laser actuation was achieved in the mock artery at a laser power of ~8 W.ConclusionWe have shown the design and fabrication of an SMP stent and a means of light delivery for photothermal actuation. Though further studies are required to optimize the device and assess thermal tissue damage, photothermal actuation of the SMP stent was demonstrated.

Opacification of Shape Memory Polymer Foam Designed for Treatment of Intracranial Aneurysms

Shape memory polymer (SMP) foam possesses structural and mechanical characteristics that make them very promising as an alternative treatment for intracranial aneurysms. Our SMP foams have low densities, with porosities as high as 98.8%; favorable for catheter delivery and aneurysm filling, but unfavorable for attenuating X-rays. This lack of contrast impedes the progression of this material becoming a viable medical device. This paper reports on increasing radio-opacity by incorporating a high-Z element, tungsten particulate filler to attenuate X-rays, while conserving similar physical properties of the original non-opacified SMP foams. The minimal amount of tungsten for visibility was determined and subsequently incorporated into SMP foams, which were then fabricated into samples of increasing thicknesses. These samples were imaged through a pig’s skull to demonstrate radio-opacity in situ. Quantification of the increase in image contrast was performed via image processing methods and standard curves were made for varying concentrations of tungsten doped solid and foam SMP. 4% by volume loading of tungsten incorporated into our SMP foams has proven to be an effective method for improving radio-opacity of this material while maintaining the mechanical, physical and chemical properties of the original formulation.

Prototype Fabrication and Preliminary In Vitro Testing of a Shape Memory Endovascular Thrombectomy Device

An electromechanical microactuator comprised of shape memory polymer (SMP) and shape memory nickel-titanium alloy (nitinol) was developed and used in an endovascular thrombectomy device prototype. The microactuator maintains a straight rod shape until an applied current induces electro-resistive (Joule) heating, causing the microactuator to transform into a corkscrew shape. The straight-to-corkscrew transformation geometry was chosen to permit endovascular delivery through (straight form) and retrieval of (corkscrew form) a stroke-causing thrombus (blood clot) in the brain. Thermal imaging of the microactuator during actuation in air indicated that the steady-state temperature rise caused by Joule heating varied quadratically with applied current and that actuation occurred near the glass transition temperature of the SMP (86degC). To demonstrate clinical application, the device was used to retrieve a blood clot in a water-filled silicone neurovascular model. Numerical modeling of the heat transfer to the surrounding blood and associated thermal effects on the adjacent artery potentially encountered during clinical use suggested that any thermal damage would likely be confined to localized areas where the microactuator was touching the artery wall. This shape memory mechanical thrombectomy device is a promising tool for treating ischemic stroke without the need for infusion of clot-dissolving drugs.

Endovascular management of cerebral vasospasm.

CEREBRAL VASOSPASM REMAINS a leading cause of death and disability in patients with ruptured cerebral aneurysms. The development of endovascular intervention in the past two decades has shown promising results in the treatment of vasospasm. Endovascular techniques that have been used in humans include intra-arterial infusion of vasorelaxants and direct mechanical dilation with transluminal balloon angioplasty. This article reviews the current indications and role of endovascular therapy in the management of cerebral vasospasm, its clinical significance, and potential future therapies.

In vivo response to an implanted shape memory polyurethane foam in a porcine aneurysm model

Cerebral aneurysms treated by traditional endovascular methods using platinum coils have a tendency to be unstable, either due to chronic inflammation, compaction of coils, or growth of the aneurysm. We propose to use alternate filling methods for the treatment of intracranial aneurysms using polyurethane-based shape memory polymer (SMP) foams. SMP polyurethane foams were surgically implanted in a porcine aneurysm model to determine biocompatibility, localized thrombogenicity, and their ability to serve as a stable filler material within an aneurysm. The degree of healing was evaluated via gross observation, histopathology, and low vacuum scanning electron microscopy imaging after 0, 30, and 90 days. Clotting was initiated within the SMP foam at time 0 (<1 h exposure to blood before euthanization), partial healing was observed at 30 days, and almost complete healing had occurred at 90 days in vivo, with minimal inflammatory response.

Thermomechanical Properties, Collapse Pressure, and Expansion of Shape Memory Polymer Neurovascular Stent Prototypes

Shape memory polymer stent prototypes were fabricated from thermoplastic polyurethane. Commercial stents are generally made of stainless steel or other alloys. These alloys are too stiff and prevent most stent designs from being able to navigate small and tortuous vessels to reach intracranial lesions. A solid tubular model and a high flexibility laser etched model are presented. The stents were tested for collapse in a pressure chamber. At 37 degrees C, the full collapse pressure was comparable to that of commercially available stents, and higher than the estimated maximum pressure exerted by intracranial arteries. However, there is a potential for onset of collapse, which needs further study. The stents were crimped and expanded, the laser-etched stent showed full recovery with an expansion ratio of 2.7 and a 1% axial shortening.

Virtual Treatment of Basilar Aneurysms Using Shape Memory Polymer Foam

Numerical simulations are performed on patient-specific basilar aneurysms that are treated with shape memory polymer (SMP) foam. In order to assess the post-treatment hemodynamics, two modeling approaches are employed. In the first, the foam geometry is obtained from a micro-CT scan and the pulsatile blood flow within the foam is simulated for both Newtonian and non-Newtonian viscosity models. In the second, the foam is represented as a porous media continuum, which has permeability properties that are determined by computing the pressure gradient through the foam geometry over a range of flow speeds comparable to those of in vivo conditions. Virtual angiography and additional post-processing demonstrate that the SMP foam significantly reduces the blood flow speed within the treated aneurysms, while eliminating the high-frequency velocity fluctuations that are present within the pre-treatment aneurysms. An estimation of the initial locations of thrombus formation throughout the SMP foam is obtained by means of a low fidelity thrombosis model that is based upon the residence time and shear rate of blood. The Newtonian viscosity model and the porous media model capture similar qualitative trends, though both yield a smaller volume of thrombus within the SMP foam.