Jong-Min Jeon

Biosynthesis of poly(3-hydroxybutyrate-co-3- hydroxyvalerate) containing a predominant amount of 3-hydroxyvalerate by engineered Escherichia coli expressing propionate-CoA transferase

Of the biodegradable polyhydroxyalkanoates (PHAs), poly(hydroxybutyrate‐co‐hydroxyvalerate) (P(HB‐co‐HV)) is often considered for fabrication of biocompatible and absorbable medical devices and other applications. Depending on the application, however, specific mechanical or processing properties must be improved. To address these required properties, we sought to alter the monomer composition of the copolymer by a combination genetic engineering in an Escherichia coli host and carbon substrate feeding.

Medium engineering for enhanced production of undecylprodigiosin antibiotic in Streptomyces coelicolor using oil palm biomass hydrolysate as a carbon source.

In this study, a biosugar obtained from empty fruit bunch (EFB) of oil palm by hot water treatment and subsequent enzymatic saccharification was used for undecylprodigiosin production, using Streptomyces coelicolor. Furfural is a major inhibitor present in EFB hydrolysate (EFBH), having a minimum inhibitory concentration (MIC) of 1.9mM, and it reduces utilization of glucose (27%), xylose (59%), inhibits mycelium formation, and affects antibiotic production. Interestingly, furfural was found to be a good activator of undecylprodigiosin production in S. coelicolor, which enhanced undecylprodigiosin production by up to 52%. Optimization by mixture analysis resulted in a synthetic medium containing glucose:furfural:ACN:DMSO (1%, 2mM, 0.2% and 0.3%, respectively). Finally, S. coelicolor was cultured in a fermenter in minimal medium with EFBH as a carbon source and addition of the components described above. This yielded 4.2μg/mgdcw undecylprodigiosin, which was 3.2-fold higher compared to that in un-optimized medium.

Microbial biodiesel production from oil palm biomass hydrolysate using marine Rhodococcus sp. YHY01

The effect of various biomass derived inhibitors (i.e. furfural, hydroxymethylfurfural (HMF), vanillin, 4-hydroxy benzaldehyde (4-HB) and acetate) was investigated for fatty acid accumulation in Rhodococcus sp. YHY 01. Rhodococcus sp. YHY01 was able to utilize acetate, vanillin, and 4-HB for biomass production and fatty acid accumulation. The IC50 value for furfural (3.1mM), HMF (3.2mM), vanillin (2.0mM), 4-HB (2.7mM) and acetate (3.7mM) was calculated. HMF and vanillin affect fatty acid composition and increase saturated fatty acid content. Rhodococcus sp. YHY 01 cultured with empty fruit bunch hydrolysate (EFBH) as the main carbon source resulted in enhanced biomass (20%) and fatty acid productivity (37%), in compression to glucose as a carbon source. Overall, this study showed the beneficial effects of inhibitory molecules on growth and fatty acid production, and support the idea of biomass hydrolysate utilization for biodiesel production by avoiding complex efforts to remove inhibitory compounds.

Characterization of a new ScbR-like γ-butyrolactone binding regulator (SlbR) in Streptomyces coelicolor

Abstractγ-Butyrolactones in Streptomyces are well recognized as bacterial hormones, and they affect secondary metabolism of Streptomyces. γ-Butyrolactone receptors are considered important regulatory proteins, and various γ-butyrolactone synthases and receptors have been reported in Streptomyces. Here, we characterized a new regulator, SCO0608, that interacted with SCB1 (γ-butyrolactone of Streptomyces coelicolor) and bound to the scbR/A and adpA promoters. The SCO0608 protein sequences are not similar to those of any known γ-butyrolactone binding proteins in Streptomyces such as ScbR from S. coelicolor or ArpA from Streptomyces griseus. Interestingly, SCO0608 functions as a repressor of antibiotic biosynthesis and spore formation in R5 complex media. We showed the existence of another type of γ-butyrolactone receptor in Streptomyces, and this SCO0608 was named ScbR-like γ-butyrolactone binding regulator (SlbR) in S. coelicolor.

Overexpression of succinyl‐CoA synthase for poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) production in engineered Escherichia coli BL21(DE3)

This study aims to increase the 3‐hydroxyvalerate (3HV) fraction in poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [P(HB‐co‐HV)] using succinyl‐CoA synthase.

Increase in furfural tolerance by combinatorial overexpression of NAD salvage pathway enzymes in engineered isobutanol-producing E. coli

To reduce the furfural toxicity for biochemical production in E. coli, a new strategy was successfully applied by supplying NAD(P)H through the nicotine amide salvage pathway. To alleviate the toxicity, nicotinamide salvage pathway genes were overexpressed in recombinant, isobutanol-producing E. coli. Gene expression of pncB and nadE respectively showed increased tolerance to furfural among these pathways. The combined expression of pncB and nadE was the most effective in increasing the tolerance of the cells to toxic aldehydes. By comparing noxE- and fdh-harbouring strains, the form of NADH, rather than NAD+, was the major effector of furfural tolerance. Overall, this study is the application of the salvage pathway to isobutanol production in the presence of furfural, and this system seems to be applicable to alleviate furfural toxicity in the production of other biochemical.

Production of itaconate by whole-cell bioconversion of citrate mediated by expression of multiple cis-aconitate decarboxylase ( cadA ) genes in Escherichia coli

Itaconate, a C5 unsaturated dicarboxylic acid, is an important chemical building block that is used in manufacturing high-value products, such as latex and superabsorbent polymers. Itaconate is produced by fermentation of sugars by the filamentous fungus Aspergillus terreus. However, fermentation by A. terreus involves a long fermentation period and the formation of various byproducts, resulting in high production costs. E. coli has been developed as an alternative for producing itaconate. However, fermentation of glucose gives low conversion yields and low productivity. Here, we report the whole-cell bioconversion of citrate to itaconate with enhanced aconitase and cis-aconitate decarboxylase activities by controlling the expression of multiple cadA genes. In addition, this bioconversion system does not require the use of buffers, which reduces the production cost and the byproducts released during purification. Using this whole-cell bioconversion system, we were able to catalyze the conversion of 319.8 mM of itaconate (41.6 g/L) from 500 mM citrate without any buffer system or additional cofactors, with 64.0% conversion in 19 h and a productivity of 2.19 g/L/h. Our bioconversion system suggests very high productivity for itaconate production.

Metal removal and reduction potential of an exopolysaccharide produced by Arctic psychrotrophic bacterium Pseudomonas sp. PAMC 28620

An exopolysaccharide (EPS) was produced from psychrotrophic Arctic glacier fore-field soil bacterium Pseudomonas sp. PAMC 28620 using glycerol enriched medium and the maximum productivity 7.24 ± 0.31 g L−1 of EPS was obtained after 168 h of fermentation. The EPS was purified and analysed by HPLC, GC-MS, FT-IR, 1H and 13C NMR. The EPS obtained from Arctic strain PAMC 28620 exhibits a distinctive structural composition and the constituent sugar monomers are rhamnose, galactose, glucose, fucose, mannose and ribose. The purified EPS has shown excellent flocculating and emulsification capacities with promising biotechnological and ecological implications. From the metal removal experiments, the EPS exhibited remarkable metal adsorption (99%) potential adopting the order Fe2+ > Cu2+ > Mg2+ > Zn2+ > Mn2+ > Ca2+. FE-SEM combined with EDX analysis has shown that the metal ions were complexed or immobilized onto the EPS matrix and further reduced to nanoparticles (150–950 nm). This study is significant in terms of metal removal and reduction potential of Arctic bacterial EPS and the possible ecological roles of the EPS in Arctic environment.

Production and characterization of medium-chain-length polyhydroxyalkanoate copolymer from Arctic psychrotrophic bacterium Pseudomonas sp. PAMC 28620

Arctic psychrotrophic bacterium Pseudomonas sp. PAMC 28620 was found to produce a distinctive medium-chain-length polyhydroxyalkanoate (MCL-PHA) copolymer when grown on structurally unrelated carbon sources including glycerol. The maximum MCL-PHA copolymer yield was obtained about 52.18±4.12% from 7.95±0.66g/L of biomass at 144h of fermentation when 3% glycerol was used as sole carbon and energy source during the laboratory-scale bioreactor process. Characterization of the copolymer was carried out using fourier transform infrared spectroscopy (FTIR), gas chromatography-mass spectrometry (GC-MS), proton (1H) and carbon (13C) nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), differential scanning calorimeter (DSC) and thermo-gravimetric analysis (TGA). The copolymer produced by Pseudomonas sp. PAMC 28620 consisting of four PHA monomers and identified as 3-hydroxyoctanoate (3HO), 3-hydroxydecanoate (3HD), 3-hydroxydodecanoate (3HDD) and 3-hydroxytetradecanoate (3HTD). An average molecular weight of the copolymer was found approximately 30.244kDa with polydispersity index (PDI) value of 2.05. Thermal analysis showed the produced MCL-PHA copolymer to be low-crystalline (43.73%) polymer with great thermal stability, having the thermal decomposition temperature of 230°C-280°C, endothermic melting temperature (Tm) of 172.84°C, glass transition (Tg) temperature of 3.99°C, and apparent melting enthalpy fusion (ΔHm) about 63.85Jg-1.

Application of a non-halogenated solvent, methyl ethyl ketone (MEK) for recovery of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(HB-co-HV)] from bacterial cells

Conventional solvent-based methods are still the most practical approaches for recovery of polyhydroxyalkanoate (PHA) polymer from cellular biomass, even though potential alternatives exist, including chemical, mechanical, and enzymatic methods. It is still necessary, however, to avoid dangerous and environmentally unfriendly solvents (e.g., chloroform and dichloromethane) in the polymer recovery process. In the work presented here, we applied various solvent systems to recover PHA from Ralstonia eutropha and recombinant Escherichia coli cells. It was demonstrated that methyl ethyl ketone (MEK) is a promising solvent for PHA recovery from bacterial cells, particularly for the copolymer poly(hydroxybutyrate-cohydroxyvalerate) [P(HB-co-HV)], exhibiting > 90% polymer recovery. Even though MEK did not solubilize PHAs to the same extent as chloroform, it can recover a comparable amount of polymer because of its processing advantages, such as the low viscosity of the MEK/PHA solution, and the lower density of MEK as compared to cellular components. MEK was found to be the best alternative, non-halogenated solvent among examined candidates for recovery of P(HB-co-HV) from cells. The MEK treatment of PHAcontaining cells further allowed us to eliminate several costly and lengthy steps in the extraction process, such as cell lysis, centrifugation, and filtration.