Yung-Hun Yang

Ionic Liquid-mediated Extraction of Lipids from Algal Biomass

Lipids from algal biomass were extracted using mixtures of ionic liquids (ILs) and methanol, and fatty acid profiles of the extracted lipids were characterized in this work. Mixtures of ILs and methanol successfully dissolved biomass leaving lipids insoluble. The total contents of lipids extracted from commercial and cultivated Chlorella vulgaris were 10.6% and 11.1%, respectively, by the conventional Bligh and Dyers method, while a mixture of [Bmim][CF(3)SO(3)] and methanol extracted 12.5% and 19.0% of the lipids, respectively. Multi-parameter regression by the linear solvation energy relationship showed that dipolarity/polarizability and hydrogen bond acidity of ILs are more important than their hydrogen bond basicity for effectively extracting lipids from algal biomass. Fatty acid profiles of the lipids extracted using IL-methanol mixtures showed that C16:0, C16:1, C18:2, and C18:3 fatty acids were dominant. This suggests that the lipids extracted from C. vulgaris can be used as a source of biodiesel production.

NdgR, an IclR-like regulator involved in amino-acid-dependent growth, quorum sensing, and antibiotic production in Streptomyces coelicolor

NdgR (regulator for nitrogen source-dependent growth and antibiotic production), an IclR-like regulator, has been initially identified as a binding protein to the promoters of doxorubicin biosynthetic genes in Streptomcyes peucetius by DNA affinity capture assay method. NdgR is well conserved throughout the Streptomcyes species and many other bacteria such as Mycobacteria and Corynebacteria. In Streptomcyes coelicolor, ndgR deletion mutant showed slow cell growth and defects in differentiation and enhances the production of actinorhodin (ACT) in minimal media containing certain amino acids where wild-type strain could not produce ACT. Although deletion mutant of ndgR showed different antibiotic production in minimal media containing Leu or Gln, it only showed reduced mRNA expression levels of the genes involved in leucine metabolism. Neither NdgR-dependent expression of glnA nor direct binding of NdgR protein to glnA, glnII, and glnR promoters was observed. However, ScbR, which is governed by NdgR shown by gel mobility shift assay, binds to promoter of glnR, suggesting indirect regulation of glutamine metabolism by NdgR. NdgR protein binds to intergenic region of ndgR–leuC, and scbR–scbA involved in γ-butyrolactone. Two-dimensional gel analysis has shown a global effect of ndgR deletion in protein expression, including up-regulated proteins involved in ACT synthesis and down-regulation of chaperones such as GroEL, GroES, and DnaK. These results suggest a global regulatory role for NdgR in amino acid metabolisms, quorum sensing, morphological changes, antibiotic production, and expression of chaperonines in S. coelicolor.

Mass spectrometric screening of transcriptional regulators involved in antibiotic biosynthesis in Streptomyces coelicolor A3(2)

DNA-affinity capture assay (DACA) coupled with liquid chromatography–tandem mass spectrometry analysis was applied to identify the transcriptional regulators involved in the biosynthesis of actinorhodin (Act) and undecylprodigiosin (Red) in Streptomyces coelicolor. The aim of this analysis was to determine the specific transcriptional regulators binding to the promoter region of actII-ORF4 or redD. The results of the DACA, as the first screening tool, identified eight proteins, including AdpA, as candidate regulators binding to those promoter regions. To show the direct physical relationship between the regulators and promoters, we purified four regulators over-expressed in soluble form in Escherichia coli and subjected these to an electrophoretic mobility shift assay (EMSA). The results of the EMSA appeared to be compatible with the DACA results for those regulators. A null mutant was also constructed for one of these regulators, SCO6008, which showed early Red production and quite delayed Act production in R5− medium. These observations suggest that DACA can be widely used to find new regulators and that the regulator SCO6008 may be involved in antibiotic production through its binding to the redD promoter.

High-Throughput Quantitative Analysis of Total N-Glycans by Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry

Accurate and reproducible quantification of glycans from protein drugs has become an important issue for quality control of therapeutic proteins in biopharmaceutical and biotechnology industries. Mass spectrometry is a promising tool for both qualitative and quantitative analysis of glycans owing to mass accuracy, efficiency, and reproducibility, but it has been of limited success in quantitative analysis for sialylated glycans in a high-throughput manner. Here, we present a solid-phase permethylation-based total N-glycan quantitative method that includes N-glycan releasing, purification, and derivatization on a 96-well plate platform. The solid-phase neutralization enabled us to perform reliable absolute quantification of the acidic N-glycans as well as neutral N-glycans from model glycoproteins (i.e., chicken ovalbumin and porcine thyroglobulin) by only using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). Furthermore, low-abundance sialylated N-glycans from human serum prostate specific antigen (PSA), an extremely valuable prostate cancer marker, were initially quantified, and their chemical compositions were proposed. Taken together, these results demonstrate that our all-inclusive glycan preparation method based on a 96-well plate platform may contribute to the precise and reliable qualitative and quantitative analysis of glycans.

Improved detergent-based recovery of polyhydroxyalkanoates (PHAs)

Extracting polyhydroxyalkanoate (PHA) polymer from bacterial cells often involves harsh conditions, including use of environmentally harmful solvents. We evaluated different detergents under various conditions to extract PHA from Ralstonia eutropha and Escherichia coli cells. Most detergents tested recovered highly pure PHA polymer from cells in amounts that depended on the percentage of polymer present in the cell. Detergents such as linear alkylbenzene sulfonic acid (LAS-99) produced a high yield of high purity polymer, and less detergent was needed compared to the amount of SDS to produce comparable yields. LAS-99 also has the advantage of being biodegradable and environmentally safe. Chemical extraction of PHA with detergents could potentially minimize or eliminate the need to use harsh organic solvents, thus making industrial PHA production a cleaner technology process.

Novel method for detection of butanolides in Streptomyces coelicolor culture broth, using a His-tagged receptor (ScbR) and mass spectrometry.

ABSTRACT γ-Butyrolactone derivative molecules in Streptomyces play a crucial role in cell density control, secondary metabolism, and cell differentiation. As their synthesis level in the cell is very low compared to those of similar N-acyl homoserine lactone molecules from gram-negative bacteria, it is very hard to analyze them even with several hundredfold concentration of the culture broth. We have developed a very quick and easy detection method using an affinity capture technique with His-tagged receptor proteins and electrospray tandem mass spectrometry. Using Streptomyces coelicolor as a model system, SCB1 was detected from only 100 ml of the culture broth after solvent extraction. This method can be further applied to detection and quantitative analysis of butanolides and inhibitor screening of the receptor molecules.

Rapid and high-throughput analysis of N-glycans from ovarian cancer serum using a 96-well plate platform

We present a rapid and high-throughput human serum N-glycan preparation technology using 96-well plate-based procedures. The released N-glycans from polyvinylidene fluoride (PVDF) membrane filter plate are subsequently loaded to porous graphitic carbon (PGC) containing a 96-well plate to remove salts and other contaminants without sacrificing accuracy or reproducibility. This robust glycan preparation technology is applied to ovarian cancer diagnosis using 5 microl of patient serum.

Production of algal biomass (Chlorella vulgaris) using sediment microbial fuel cells

In this study, a novel algal biomass production method using a sediment microbial fuel cell (SMFC) system was assessed. Under the experimental conditions, CO(2) generation from the SMFC and its rate of increase were found to be dependent on the current generated from the SMFC. However, the CH(4) production rate from the SMFC was inhibited by the generation of current. When Chlorella vulgaris was inoculated into the cathode compartment of the SMFC and current was generated under 10 Ω resistance, biomass production from the anode compartment was observed to be closely associated with the rate of current generation from the SMFC. The experimental results demonstrate that 420 mg/L of algae (dry cell weight) was produced when the current from the SMFC reached 48.5 mA/m(2). Therefore, SMFC could provide a means for producing algal biomass via CO(2) generated by the oxidation of organics upon current generation.

Wood mimetic hydrogel beads for enzyme immobilization

Wood component-based composite hydrogels have potential applications in biomedical fields owing to their low cost, biodegradability, and biocompatibility. The controllable properties of wood mimetic composites containing three major wood components are useful for enzyme immobilization. Here, lipase from Candida rugosa was entrapped in wood mimetic beads containing cellulose, xylan, and lignin by dissolving wood components with lipase in [Emim][Ac], followed by reconstitution. Lipase entrapped in cellulose/xylan/lignin beads in a 5:3:2 ratio showed the highest activity; this ratio is very similar to that in natural wood. The lipase entrapped in various wood mimetic beads showed increased thermal and pH stability. The half-life times of lipase entrapped in cellulose/alkali lignin hydrogel were 31- and 82-times higher than those of free lipase during incubation under denaturing conditions of high temperature and low pH, respectively. Owing to their biocompatibility, biodegradability, and controllable properties, wood mimetic hydrogel beads can be used to immobilize various enzymes for applications in the biomedical, bioelectronic, and biocatalytic fields.

Biosynthesis of polyesters and polyamide building blocks using microbial fermentation and biotransformation

Biopolymers can be a green alternative to fossil-based polymers and can contribute to environmental protection because they are produced using renewable raw materials. Biopolymers are composed of various small subunits (building blocks) that are the intermediates or end products of major metabolic pathways. Most building blocks are secreted directly outside of cells, making downstream processes easier and more economic. These molecules can be extracted from fermentation broth and polymerized to produce a variety of biopolymers, e.g., polybutylene terephthalate, polyethylene terephthalate, polytrimethylene terephthalate, nylon-5,4 and nylon-4,6, with applications in medicine, pharmaceuticals, and textiles. Microbes are unable to naturally produce these types of polymers; thus, the production of building blocks and their polymerization is a fascinating approach for the production of these polymers. In comparison to naturally occurring biopolymers, synthesized polymers have improved and controlled structures and higher purity. The production of monomer units provides a new direction for polymer science because new classes of polymers with unique properties that were not previously possible can be prepared. Furthermore, the engineering of microbes for building-block production is an easy process compared to engineering an entire biopolymer synthesis pathway in a single microbe. Polyesters and polyamide polymers have become an important part of human life, and their demand is increasing daily. In this review, recent approaches and technology are discussed for the production of polyester/polyamide building blocks, i.e., 2-hydroxyisobutyric acid, 3-hydroxypropionic acid, mandelic acid, itaconic acid, adipic acid, terephthalic acid, succinic acid, 1,3-propanediol, 2,3-butanediol, 1,4-butanediol, 1,3-butanediol, cadaverine, and putrescine.