Jong-Min Moon

A disposable amperometric dual-sensor for the detection of hemoglobin and glycated hemoglobin in a finger prick blood sample

A disposable microfluidic amperometric dual-sensor was developed for the detection of glycated hemoglobin (HbA1C) and total hemoglobin (Hb), separately, in a finger prick blood sample. The accurate level of total Hb was determined through the measurements of the cathodic currents of total Hb catalyzed by a toluidine blue O (TBO)-modified working electrode. Subsequently, after washing unbound Hb in the fluidic channel of dual sensor with PBS, the cathodic current by only HbA1C captured on aptamer was monitored using another aptamer/TBO-modified working electrode in the channel. To modify the sensor probe, poly(2,2´:5´,5″-terthiophene-3´-p-benzoic acid) and a multi-wall carbon nanotube (MWCNT) composite layer (pTBA@MWCNT) was electropolymerized on a screen printed carbon electrode (SPCE), followed by immobilization of TBO for the total Hb probe and aptamer/TBO for the HbA1C probe, respectively. The characterization of each sensor surface was performed using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS), quartz crystal microbalance (QCM), field-emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM). The experimental conditions affecting the analytical signal were optimized in terms of the amount of TBO, pH, temperature, binding time, applied potential, and the content ratio of monomer and MWCNT. The dynamic ranges of Hb and HbA1C were from 0.1 to 10µM and from 0.006 to 0.74µM, with detection limits of 82(±4.2)nM and 3.7(±0.8)nM, respectively. The reliability of the proposed microfluidic dual-sensor for a finger prick blood sample (1µL) was evaluated in parallel with a conventional method (HPLC) for point-of-care analysis.

A potentiometric non-enzymatic glucose sensor using a molecularly imprinted layer bonded on a conducting polymer.

A non-enzymatic potentiometric glucose sensor for the determination of glucose in the micomolar level in saliva was developed based on a molecularly imprinted polymer (MIP) binding on a conducting polymer layer. A MIP containing acrylamide, and aminophenyl boronic acid, as a host molecule to glucose, was immobilized on benzoic acid-functionalized poly(terthiophene) (pTBA) by the amide bond formation onto a gold nanoparticles deposited-screen printed carbon electrode (pTBA/AuNPs/SPCE). Aromatic boronic acid was incorporated into the MIP layer to stably capture glucose and create a potentiometric signal through the changed pKa value of polymer film by the formation of boronate anion-glucose complex with generation of H+ ions by the cis-diol reaction. Reversible binding and extraction of glucose on the sensor surface was observed using a quartz crystal microbalance. Each layer of the sensor probe was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy. The potentiometric response at the optimized conditions exhibited a wide linear dynamic range of 3.2×10-7 to 1.0×10-3M, with a detection limit of 1.9 (±0.15)×10-7M. The sensor probe revealed an excellent selectivity and sensitivity for glucose compared to other saccharides. In addition, the reliability of the proposed glucose sensor was evaluated in physiological fluid samples of saliva and finger prick blood.

Conducting polymer-based electrochemical biosensors for neurotransmitters: A review

Neurotransmitters are important biochemical molecules that control behavioral and physiological functions in central and peripheral nervous system. Therefore, the analysis of neurotransmitters in biological samples has a great clinical and pharmaceutical importance. To date, various methods have been developed for their assay. Of the various methods, the electrochemical sensors demonstrated the potential of being robust, selective, sensitive, and real time measurements. Recently, conducting polymers (CPs) and their composites have been widely employed in the fabrication of various electrochemical sensors for the determination of neurotransmitters. Hence, this review presents a brief introduction to the electrochemical biosensors, with the detailed discussion on recent trends in the development and applications of electrochemical neurotransmitter sensors based on CPs and their composites. The review covers the sensing principle of prime neurotransmitters, including glutamate, aspartate, tyrosine, epinephrine, norepinephrine, dopamine, serotonin, histamine, choline, acetylcholine, nitrogen monoxide, and hydrogen sulfide. In addition, the combination with other analytical techniques was also highlighted. Detection challenges and future prospective of the neurotransmitter sensors were discussed for the development of biomedical and healthcare applications.

ABSORPTION AND REACTION OF CO2 WITH 2,3-EPOXYPROPYL PHENYL ETHER USING ALIQUAT 336 AS CATALYST

A kinetic study on the absorption and reaction of carbon dioxide with 2,3-epoxypropyl phenyl ether (phenyl glycidyl ether, PGE) in benzene solution has been carried out at room temperature in the presence of tricaprylylmethyl ammonium chloride (Aliquat 336) as catalyst. A simple method of measuring the absorbed volume of CO2 was proposed to obtain the reaction rate constant, and it was based on the film theory accompanied by a chemical reaction. The enhancement factor (β-NCO2/NCO2o) increased with increasing bulk concentration of PGE and Aliquat 336. The flux of CO2 was proportional to the agitation speed.

Magnetic force assisted electrochemical sensor for the detection of thrombin with aptamer-antibody sandwich formation

A magnetic force assisted electrochemical aptamer-antibody sandwich assay (MESA) was developed for the detection of thrombin as a model protein in serum samples. The MESA using the formation of sandwich complexes on the electrochemical sensor probe for reaction and the removal of unbound bioconjugates from the sensor surface without washing are controlled by a magnetic field. Thrombin was determined by the cathodic currents of a toluidine blue O (TBO) attached with thrombin antibody modified magnetic nanoparticle (MNP) at the sensor surface. To detect thrombin in a serum sample, we applied a thrombin-specific aptamer as the capture molecule bound to the functionalized conducting polymer layer (poly-(2,2´:5´,5″-terthiophene-3´-p-benzoic acid) (pTBA)), and streptavidin and starch coated-MNP was conjugated with biotinylated thrombin antibodies (Ab) and TBO as the bioconjugate (MNP@Ab-TBO). The characterization of MNP@Ab-TBO and sensor probe was performed using voltammetry, impedance spectroscopy, XPS, and UV-VIS spectroscopy. The experimental conditions were optimized in terms of pH, binding time, removal time of unbound bioconjugates, and applied potential. The dynamic ranges of thrombin were from 1.0 to 500 nM with detection limit of 0.49 ( ± 0.06) nM. The recovery test demonstrates the reliability of the proposed sensing system for a handheld device.