José Luis Martínez-Vidal

Comprehensive qualitative and quantitative determination of pesticides and veterinary drugs in honey using liquid chromatography-Orbitrap high resolution mass spectrometry.

A database has been created for the simultaneous analysis of more than 350 pesticides and veterinary drugs (including antibiotics) using ultra-high performance liquid chromatography coupled to high resolution Orbitrap mass spectrometry (UHPLC-Orbitrap-MS). This is a comprehensive exact mass database built using the Exactive-Orbitrap analyzer. The developed database includes exact masses of the target ions and retention time data, and allows the automatic search of the included compounds. Generic chromatographic and MS conditions have been applied. The presented database is suitable for qualitative analysis, and it was also evaluated for quantitative purposes in routine analysis, after the optimization and validation of a generic extraction method in honey samples. Adequate recovery and precision values for most of the studied analytes were obtained and the limits of detection (LOD) ranged from 1 to 50 μg kg(-1). For pesticides, LODs were always lower than the MRLs established by European Union in honey, except for a few compounds. This method was applied to the analysis of 26 real honey samples and some pesticides (azoxystrobin, coumaphos, dimethoate and thiacloprid) were detected in 4 samples. Azoxystrobin and coumaphos were determined in two different samples (organic honey) at 1.5 μg kg(-1) and 5.1 μg kg(-1). Veterinary drugs were not detected in the analyzed samples.

Simultaneous analysis of chlorophenols, alkylphenols, nitrophenols and cresols in wastewater effluents, using solid phase extraction and further determination by gas chromatography-tandem mass spectrometry.

An analytical methodology has been developed for the simultaneous extraction of 13 phenolic compounds, including chlorophenols (CPs), nitrophenols (NTPs), cresols and alkylphenols (APs) in different types of wastewater (WW) effluents. A solid-phase extraction (SPE) method has been optimized prior to the determination by gas chromatography coupled to triple quadrupole tandem mass spectrometry (GC-QqQ-MS/MS). Due to the complexity of the matrix, a comparison study of matrix-matched-calibration (MMC) and standard addition calibration (SAC) was carried out for quantification purposes. The optimized procedure was validated using the SAC approach since it provided the most adequate quantification results (in terms of recovery and precision values). Recoveries were in the range 60-135% (0.5 μg L(-1)), 70-115% (1 μg L(-1)), and 78-120% (5 μg L(-1)), with precision values (expressed as relative standard deviation, RSD) ≤ 30% (except for 2-nitrophenol) involving intra-day and inter-day precision studies. Limits of detection (LODs) and quantification (LOQs) were also evaluated, and LOQs ranged from 0.03 μg L(-1) to 2.5 μg L(-1). The proposed method was applied to the analysis of 8 real WW effluent samples, finding some phenolic compounds (e.g. 2-chlorophenol, 2,4,6-trichlorophenol and 4-tert-octylphenol) at concentrations higher than the established LOQs.

Determination of benzoylureas in tomato by high-performance liquid chromatography using continuous on-line post-elution photoirradiation with fluorescence detection

A photochemically induced fluorescence post-column method, with HPLC separation and fluorescence detection, was developed for the determination of five naturally non-fluorescent benzoylurea insecticides: diflubenzuron, triflumuron, hexaflumuron, lufenuron and flufenoxuron. The applicability of the method to the determination of insecticides in spiked tomato was evaluated. Samples were extracted into ethyl acetate and further cleaned-up by solid-phase extraction using an aminopropyl-bonded silica cartridge. The interferences due to the matrix effect were eliminated using matrix matched standards. Linear dynamic ranges were established over more than two orders of magnitude. The limits of detection ranged from 5 to 21 ng ml(-1) (or 0.5 and 2.1 microg kg(-1) in the vegetable samples), with relative standard deviations lower than 5.0%, using blank tomato extract. Mean recoveries ranged from 79 to 102%.

Correction function on biased results due to matrix effects Application to the routine analysis of pesticide residues

A new strategy to carry out the correction of analytical results affected by systematic errors due to the matrix effect is proposed. Two types of external calibrations must be established with the purpose to estimate the matrix effect: solvent calibration (SC) and matrix-matched calibration (MC). These calibration curves are statistically compared and a correction function (CF) is proposed with the aim to simplify the resolution to the problems associated with the incidence of matrix systematic error in the analytical results. Applying this correction function to the results obtained from the solvent calibration, it is possible to make a prediction of the values that would be obtained when the matrix-matched calibration is applied. On the other hand, a rigorous study of the associated uncertainty is developed and applied to the calculated correction function. Finally, this correction function is validated by means of obtained data of recovery studies carried out by a traditional methodology. The methodology has been satisfactorily applied to the quantification of the pesticide procymidone by HPLC for assessing dermal exposure.

Analysis of Pesticides in Water Samples Using GC-ECD and GC-MS/MS Techniques

Abstract A pesticide multiresidue method for determining dichlorvos, naled. lindane, diazinon. chlorpyri-fos-methyl, dichlofluanid, chlorpyrifos, folpet, α– and β-endosulfan, endosulfan-sulphate, fen-propathrin and acrinathrin in water samples at the levels required by the EEC Drinking Waters Directive has been developed. The pesticides were selected among the most used during die last 20 years in Almeria (Spain), where there is a high agricultural activity. Solid Phase Extraction (SPE) was selected as extraction method after being compared with Liquid-Liquid Extraction (LLE). Moreover, different gas chromatographic detectors (Electron Capture Detector, ECD; Mass Spectrometer, MS; Tandem Mass Spectrometer, MS/MS) were compared. The best results of repeatability and sensitivity were obtained for ECD and MS/MS.

Photochemical-spectrofluorimetric method for the determination of benzoylurea insecticides : applications in river water samples and in technical formulations

Ultraviolet (UV) irradiation was used to obtain fluorescent photoproducts from four non-fluorescent benzoylurea (BU) insecticides (flufenoxuron (FLF), lufenuron (LUF), hexaflumuron (HF) and triflumuron (TRF)). The effect of solvent, pH (in aqueous solutions), organic solvent percentage and UV irradiation time on the excitation and emission wavelengths and fluorescence intensity were investigated. The largest fluorescence signals and the shortest UV irradiation time were obtained in methanol, ethanol and 2-propanol. Linear calibration graphs were established in the interval between 0.025 and 1.000 microg ml(-1) from FLF and TRF and between 0.050 and 1.000 microg ml(-1) from LUF and HF with regression coefficients larger than 0.99. A method based on the use of the first-derivative of the spectra of photoproducts was applied to the determination of BU insecticides in river water samples and in technical formulations. The mean recoveries ranged from 95.0% to 110.0% in river water samples and from 92.0% to 101.0% in technical formulations, according to the compound. A preconcentration step, using LLE, allowed to reach the concentration levels established by the EU directive for pesticides in drinking water.

Monitoring of 6-chloronicotinic acid in human urine by gas chromatography-tandem mass spectrometry as indicator of exposure to the pesticide imidacloprid

A new analytical method for determining 6-chloronicotinic acid (6-ClNA) in human urine is proposed. 6-ClNA is the main metabolite in warm-blooded animals after exposure to the insecticide imidachloprid. 6-ClNA was extracted from human urine using solid phase extraction (SPE) with laboratory-made cartridges of Amberlite XAD-4. A clean-up step and a derivatization process were carried out prior to gas chromatography-tandem mass spectrometric (GC-MS-MS) determination. A study on the influence of pH in the extraction process revealed that it affects the analyte extraction efficiency. A working pH zone was defined between 0.8 and 2.8. Calibration curves were studied in the concentration range of 0.5-100 ng mL(-1) and showed good linearity. Limits of detection and determination of the method were 16 and 56 pg mL(-1) respectively. The mean recovery at 10 and 100 ng mL(-1) was between 97.2 and 102.1% and the repeatability was lower than 5.4% in all cases. The analysis of urine samples of five agricultural workers from Almería (Spain) did not detect the metabolite.

Comparison of several extraction procedures for the determination of biopesticides in soil samples by ultrahigh pressure LC-MS/MS

A new procedure has been proposed for the determination of biopesticides (nicotine, sabadine, veratridine, rotenone, azadirachtin, cevadine, deguelin, spynosad D, and pyrethrins) and piperonyl butoxide in agricultural soils. Several extraction procedures such as solid-liquid extraction using mechanical shaking, sonication, pressurized liquid extraction, and modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) have been tested, obtaining better results when QuEChERS procedure without further cleanup steps was applied. The determination of the compounds was carried out by ultra high pressure liquid chromatography coupled to tandem mass spectrometry, using methanol and aqueous solution of ammonium formate 5 mM as mobile phase. The method was validated for all compounds at concentrations ranging from 10 to 100 μg/kg and recoveries ranged from 68 to 116%, except for nicotine and sabadine, with recoveries lower than 50%. Precision was estimated through intra- and inter-day studies, obtaining intra-day precision lower than 20% for most of the compounds, and inter-day precision was lower than 25%. Limits of detection and quantification were also estimated, obtaining limits of quantification equal or lower than 10 μg/kg. Finally, the method was applied to the analysis of 20 real agricultural soil samples and no biopesticide residues were found over the limit of quantification.

Determination of Metham and Thiram in Soils and Vegetables Grown in Greenhouses

Abstract The spectrophotometric method for determining dithiocarbamates based on evolution of carbon disulphide and the formation of coloured complexes with Cu(II) is reviewed and improved for microquantities of Thiram and Metham. The method is applied to the determination of Metham and Thiram in soil samples in order to study the mobility of Metham in soils and the degradation of Thiram in beans and watermelons grown in greenhouses. The t1/2 values of Thiram in green beans and watermelons are 10.6 and 12.2 days, respectively.

Analyses of Procymidone and Vinclozolin in Greenhouse Air

A method for sampling and analysis of procymidone and vinclozolin in greenhouse air was investigated. The behaviour of Chromosorb 102, Porapak R, Supelpak-2, Amberlite XAD-2, Amberlite XAD-4 and polyurethane foam (PUF) as sorbents was studied. Atmospheres containing known concentrations of these pesticides were generated. The desorption process of the analytes, concentration step and behaviour of sorbents in air with different relative humidities were tested. No breakthrough was observed in the range of concentrations studied. Personal samplers were used with the selected sorbent (PUF), for sampling procymidone and vinclozolin in an experimental greenhouse. GC-ECD analysis and MS confirmation were performed. The dissipation process of the analytes in the 24 h period after application was studied.