Joshua Pfefer

Quantitative evaluation of optical coherence tomography signal enhancement with gold nanoshells

Nanoshell-enhanced optical coherence tomography (OCT) is a novel technique with the potential for molecular imaging and improved disease detection. However, optimization of this approach will require a quantitative understanding of the influence of nanoshell parameters on detected OCT signals. In this study, OCT was performed at 1310 nm in water and turbid tissue-simulating phantoms to which nanoshells were added. The effect of nanoshell concentration, core diameter, and shell thickness on signal enhancement was characterized. Experimental results indicated trends that were consistent with predicted optical properties-a monotonic increase in signal intensity and attenuation with increasing shell and core size. Threshold concentrations for a 2-dB OCT signal intensity gain were determined for several nanoshell geometries. For the most highly backscattering nanoshells tested-291-nm core diameter, 25-nm shell thickness-a concentration of 10(9) nanoshells/mL was needed to produce this signal increase. Based on these results, we discuss various practical considerations for optimizing nanoshell-enhanced OCT. Quantitative experimental data presented here will facilitate optimization of OCT-based diagnostics and may also be relevant to other reflectance-based approaches as well.

Depth-sensitive reflectance measurements using obliquely oriented fiber probes

Computer simulation is used to facilitate the design of fiber-probe geometries that enable enhanced detection of optical signals arising from specific tissue depths. Obtaining understanding of the relationship between fiber-probe design and tissue interrogation is critical when developing strategies for optical detection of epithelial precancers that originate at known depths from the tissue surface. The accuracy of spectroscopic diagnostics may be enhanced by discretely probing the optical properties of epithelium and underlying stroma, within which the morphological and biochemical features vary as a function of depth. While previous studies have investigated controlling tissue-probing depth for fluorescence-based modalities, in this study we focus on the detection of reflected light scattered by tissue. We investigate how the depth of optical interrogation may be controlled through combinations of collection angles, source-detector separations, and numerical apertures. We find that increasing the obliquity of collection fibers at a given source-detector separation can effectively enhance the detection of superficially scattered signals. Fiber numerical aperture provides additional depth selectivity; however, the perturbations in sampling depth achieved through this means are modest relative to the changes generated by modifying the angle of collection and source-detection separation.

Broadband ultraviolet-visible optical property measurement in layered turbid media

The ability to accurately measure layered biological tissue optical properties (OPs) may improve understanding of spectroscopic device performance and facilitate early cancer detection. Towards these goals, we have performed theoretical and experimental evaluations of an approach for broadband measurement of absorption and reduced scattering coefficients at ultraviolet-visible wavelengths. Our technique is based on neural network (NN) inverse models trained with diffuse reflectance data from condensed Monte Carlo simulations. Experimental measurements were performed from 350 to 600 nm with a fiber-optic-based reflectance spectroscopy system. Two-layer phantoms incorporating OPs relevant to normal and dysplastic mucosal tissue and superficial layer thicknesses of 0.22 and 0.44 mm were used to assess prediction accuracy. Results showed mean OP estimation errors of 19% from the theoretical analysis and 27% from experiments. Two-step NN modeling and nonlinear spectral fitting approaches helped improve prediction accuracy. While limitations and challenges remain, the results of this study indicate that our technique can provide moderately accurate estimates of OPs in layered turbid media.

UV Radiation Increases Carcinogenic Risks for Oral Tissues Compared to Skin

People can expose their oral cavities to UV (290–400 nm) by simply opening their mouths while outdoors. They can also have their oral cavities exposed to UV indoors to different UV‐emitting devices used for diagnoses, treatments and procedures like teeth whitening. Because the World Health Organization declared UV radiation as a complete human carcinogen in 2009, we asked if oral tissues are at a similar or higher carcinogenic risk compared to skin tissue. To understand the UVB (290–320 nm)‐related carcinogenic risks to these tissues, we measured initial DNA damage in the form of cyclobutane pyrimidine dimers (CPD), the repair rate of CPD (24 h) and the number of apoptotic dead cells over time resulting from increasing doses of erythemally weighted UV radiation. We used commercially available 3D‐engineered models of human skin (EpiDerm™), gingival (EpiGingival™) and oral (EpiOral™) tissues and developed an analytical approach for our tri‐labeling fluorescent procedure to identify total DNA, CPD and apoptotic cells so we can simultaneously quantify DNA repair rates and dead cells. Both DNA repair and apoptotic cell numbers are significantly lower in oral cells compared with skin cells. The combined results suggest UVB‐exposed oral tissues are at a significantly higher carcinogenic risk than skin tissues.

Optical characterization of cutaneous transilluminators for eye safety

Cutaneous transilluminators are light-emitting devices used to localize blood vessels for various medical procedures. They are often used in populations that may be at increased risk for skin burns, such as neonates and the elderly. While there is a known potential for skin burns, little is known about the ophthalmic risk from the use of these devices. This paper will report on the laboratory evaluation of the potential ocular hazards from transilluminators (TIs). Our results indicate that transilluminators which incorporate white-light LEDs have emissions that have the potential for producing injury to the retina, especially in patients who may have a reduced aversion response.

Techniques for Reflectance-Based Determination of Optical Properties in Highly Attenuating Turbid Media

Optical property measurement accuracy was evaluated for fiberoptic reflectance system with linear-array and bifurcated-fiber probes. A combined approach yielded a 75% reduction in errors for absorption and reduced scattering coefficients as compared to our previous system

Performance evaluation of photoacoustic oximetry imaging systems using a dynamic blood flow phantom with tunable oxygen saturation

Photoacoustic Imaging (PAI) is an emerging technology with strong potential for broad clinical applications from breast cancer detection to cerebral monitoring due to its ability to compute maps of blood oxygen saturation (SO2) distribution in deep tissues using multispectral imaging. However, no well-validated consensus test methods currently exist for evaluating oximetry-specific performance characteristics of PAI devices. We have developed a phantombased flow system capable of rapid SO2 adjustment to serve as a test bed for elucidation of factors impacting SO2 measurement and quantitative characterization of device performance. The flow system is comprised of a peristaltic pump, membrane oxygenator, oxygen and nitrogen gas, and in-line oxygen, pH, and temperature sensors that enable real-time estimation of SO2 reference values. Bovine blood was delivered through breast-relevant tissue phantoms containing vessel-mimicking fluid channels, which were imaged using a custom multispectral PAI system. Blood was periodically drawn for SO2 measurement in a clinical-grade CO-oximeter. We used this flow phantom system to evaluate the impact of device parameters (e.g.,wavelength-dependent fluence corrections) and tissue parameters (e.g. fluid channel depth, blood SO2, spectral coloring artifacts) on oximetry measurement accuracy. Results elucidated key challenges in PAI oximetry and device design trade-offs, which subsequently allowed for optimization of system performance. This approach provides a robust benchtop test platform that can support PAI oximetry device optimization, performance validation, and clinical translation, and may inform future development of consensus test methods for performance assessment of photoacoustic oximetry imaging systems.

Evaluation of a Multi-wavelength Reflectance System for Determination of Tissue Optical Properties in the UVA-VIS

Tissue optical properties at ultraviolet-A and visible wavelengths are needed to elucidate diagnostic device performance. We have developed a multi-wavelength fiberoptic reflectance system for optical property measurement and evaluated its performance using hemoglobin-based tissue phantoms.

Optical Properties of Nanoshells for Diagnostic Imaging

Extinction and backscattering properties of gold nanoshells were investigated using spectrophotometry and optical coherence tomography (OCT). While trends were largely consistent between these measurements and Mie theory, quantitative agreement varied with wavelength and nanoshell geometry.