Julia Schütte

“Artificial micro organs”—a microfluidic device for dielectrophoretic assembly of liver sinusoids

In order to study possible toxic side effects of potential drug compounds in vitro a reliable test system is needed. Predicting liver toxicity presents a major challenge of particular importance as liver cells grown in a cell culture suffer from a rapid loss of their liver specific functions. Therefore we are developing a new microfluidic test system for liver toxicity. This test system is based on an organ-like liver 3D co-culture of hepatocytes and endothelial cells. We devised a microfluidic chip featuring cell culture chambers with integrated electrodes for the assembly of liver sinusoids by dielectrophoresis. Fluid channels enable an organ-like perfusion with culture media and test compounds. Different chamber designs were studied and optimized with regard to dielectrophoretic force distribution, hydrodynamic flow profile, and cell trapping rate using numeric simulations. Based on simulation results a microchip was injection-moulded from COP. This chip allowed the assembly of viable hepatocytes and endothelial cells in a sinusoid-like fashion.

Microfluidic chip system for the selection and enrichment of cell binding aptamers

Aptamers are promising cell targeting ligands for several applications such as for the diagnosis, therapy, and drug delivery. Especially, in the field of regenerative medicine, stem cell specific aptamers have an enormous potential. Using the combinatorial chemistry process SELEX (Systematic Evolution of Ligands by Exponential enrichment), aptamers are selected from a huge oligonucleotide library consisting of approximately 10(15) different oligonucleotides. Here, we developed a microfluidic chip system that can be used for the selection of cell specific aptamers. The major drawbacks of common cell-SELEX methods are the inefficient elimination of the unspecifically bound oligonucleotides from the cell surface and the unspecific binding/uptake of oligonucleotides by dead cells. To overcome these obstacles, a microfluidic device, which enables the simultaneous performance of dielectrophoresis and electrophoresis in the same device, was designed. Using this system, viable cells can be selectively assembled by dielectrophoresis between the electrodes and then incubated with the oligonucleotides. To reduce the rate of unspecifically bound sequences, electrophoretic fields can be applied in order to draw loosely bound oligonucleotides away from the cells. Furthermore, by increasing the flow rate in the chip during the iterative rounds of SELEX, the selection pressure can be improved and aptamers with higher affinities and specificities can be obtained. This new microfluidic device has a tremendous capability to improve the cell-SELEX procedure and to select highly specific aptamers.

Numerical modelling and measurement of cell trajectories in 3‐D under the influence of dielectrophoretic and hydrodynamic forces

This research is part of a program aiming at the development of a fluidic microsystem for in vitro drug testing. For this purpose, primary cells need to be assembled to form cellular aggregates in such a way as to resemble the basic functional units of organs. By providing for in vivo‐like cellular contacts, proper extracellular matrix interaction and medium perfusion it is expected that cells will retain their phenotype over prolonged periods of time. In this way, in vitro test systems exhibiting in vivo type predictivity in drug testing are envisioned. Towards this goal a 3‐D microstructure micro‐milled in a cyclic olefin copolymer (COC) was designed in such a way as to assemble liver cells via insulator‐based dielectrophoresis (iDEP) in a sinusoid‐type fashion. First, numeric modelling and simulation of dielectrophoretic and hydrodynamic forces acting on cells in this microsystem was performed. In particular, the problem of the discontinuity of the electric field at the interface between the fluid media in the system and the polymer materials it consists of was addressed. It was shown that in certain cases, the material of the microsystem may be neglected altogether without introducing considerable error into the numerical solution. This simplification enabled the simulation of 3‐D cell trajectories in complex chip geometries. Secondly, the assembly of HepG2 cells by insulator‐based dielectrophoresis in this device is demonstrated. Finally, theoretical results were validated by recording 3‐D cell trajectories and the Clausius–Mossotti factor of liver cells was determined by combining results obtained from both simulation and experiment.

Tailoring microfluidic systems for organ-like cell culture applications using multiphysics simulations

Replacing animal testing with in vitro cocultures of human cells is a long-term goal in pre-clinical drug tests used to gain reliable insight into drug-induced cell toxicity. However, current state-of-the-art 2D or 3D cell cultures aiming at mimicking human organs in vitro still lack organ-like morphology and perfusion and thus organ-like functions. To this end, microfluidic systems enable construction of cell culture devices which can be designed to more closely resemble the smallest functional unit of organs. Multiphysics simulations represent a powerful tool to study the various relevant physical phenomena and their impact on functionality inside microfluidic structures. This is particularly useful as it allows for assessment of system functions already during the design stage prior to actual chip fabrication. In the HepaChip®, dielectrophoretic forces are used to assemble human hepatocytes and human endothelial cells in liver sinusoid-like structures. Numerical simulations of flow distribution, shear stress, electrical fields and heat dissipation inside the cell assembly chambers as well as surface wetting and surface tension effects during filling of the microchannel network supported the design of this human-liver-on-chip microfluidic system for cell culture applications. Based on the device design resulting thereof, a prototype chip was injection-moulded in COP (cyclic olefin polymer). Functional hepatocyte and endothelial cell cocultures were established inside the HepaChip® showing excellent metabolic and secretory performance.

Mikrofluidisches 3D-Zellkulturmodell der Blut-Hirn-Schranke

State of the art animal and cell culture models fail to predict the ability of drugs to cross the blood-brain barrier as they lack comparability to the complex human situation. The development of novel pharmaceutics therefore requires in vitro models with human like cell response. Therefore, we are developing a model which mimics the organ environment including the specific 3D arrangement of different cell types, extracellular matrix, and perfusion by combining biology, biochemistry and microfluidic technology.