Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where K. Kilaru is active.

Publication


Featured researches published by K. Kilaru.


Proceedings of SPIE | 2013

Development of mirror modules for the ART-XC instrument aboard the Spectrum-Roentgen-Gamma mission

Mikhail V. Gubarev; Brian D. Ramsey; Steve O'Dell; R. Elsner; K. Kilaru; Jeff McCracken; M. N. Pavlinsky; A. Tkachenko; Igor Y. Lapshov; Carolyn Atkins; Vyacheslav E. Zavlin

The Marshall Space Flight Center (MSFC) is developing x-ray mirror modules for the ART-XC instrument on board the Spectrum-Roentgen Gamma Mission. Four of those modules are being fabricated under a Reimbursable Agreement between NASA and the Russian Space Research Institute (IKI.) An additional three flight modules and one spare for the ART-XC Instrument are produced under a Cooperative Agreement between NASA and IKI. The instrument will consist of seven co-aligned x-ray mirror modules with seven corresponding CdTe focal plane detectors. Each module consists of 28 nested thin Ni/Co shells giving an effective area of 65 cm2 at 8 keV, response out to 30 keV, and an angular resolution of 45 arcsec or better HPD. Delivery of the first four modules is scheduled for November 2013, while the remaining three modules will be delivered to IKI in January 2014. We present a status of the ART x-ray module development at MSFC.


Proceedings of SPIE | 2012

The Marshall Space Flight Center development of mirror modules for the ART-XC instrument aboard the Spectrum-Roentgen-Gamma mission

Mikhail V. Gubarev; Brian D. Ramsey; Steve O'Dell; R. Elsner; K. Kilaru; Jeff McCracken; Mikhail N. Pavlinsky; A. Tkachenko; Igor Y. Lapshov

The Marshall Space Flight Center (MSFC) is developing x-ray mirror modules for the ART-XC instrument on board the Spectrum-Roentgen-Gamma Mission under a Reimbursable Agreement between NASA and the Russian Space Research Institute (IKI.) ART-XC will consist of seven co-aligned x-ray mirror modules with seven corresponding CdTe focal plane detectors. Currently, four of the modules are being fabricated by the Marshall Space Flight Center (MSFC.) Each MSFC module consist of 28 nested Ni/Co thin shells giving an effective area of 65 cm2 at 8 keV, response out to 30 keV, and an angular resolution of 45 arcsec or better HPD. Delivery of these modules to the IKI is scheduled for summer 2013. We present a status of the ART x-ray modules development at the MSFC.


Proceedings of SPIE | 2013

X-ray optic developments at NASA's MSFC

Carolyn Atkins; Brian D. Ramsey; K. Kilaru; Mikhail V. Gubarev; Steve O'Dell; R. Elsner; D. A. Swartz; Jessica A. Gaskin; Martin C. Weisskopf

NASAs Marshall Space Flight Center (MSFC) has a successful history of fabricating optics for astronomical x-ray telescopes. In recent years optics have been created using electroforming replication for missions such as the balloon payload HERO (High energy replicated optics) and the rocket payload FOXSI (Focusing Optics x-ray Solar Imager). The same replication process is currently being used in the creation seven x-ray mirror modules (one module comprising of 28 nested shells) for the Russian ART-XC (Astronomical Rontgen Telescope) instrument aboard the Spectrum-Roentgen-Gamma mission and for large-diameter mirror shells for the Micro-X rocket payload. In addition to MSFCs optics fabrication, there are also several areas of research and development to create the high resolution light weight optics which are required by future x-ray telescopes. Differential deposition is one technique which aims to improve the angular resolution of lightweight optics through depositing a filler material to smooth out fabrication imperfections. Following on from proof of concept studies, two new purpose built coating chambers are being assembled to apply this deposition technique to astronomical x-ray optics. Furthermore, MSFC aims to broaden its optics fabrication through the recent acquisition of a Zeeko IRP 600 robotic polishing machine. This paper will provide a summary of the current missions and research and development being undertaken at NASAs MSFC.


Proceedings of SPIE | 2014

ART-XC/SRG: status of the x-ray optics development

Mikhail V. Gubarev; Brian D. Ramsey; R. Elsner; Steve O'Dell; Jeffrey Kolodziejczak; Jeff McCracken; Vyacheslav E. Zavlin; D. A. Swartz; K. Kilaru; Carolyn Atkins; M. N. Pavlinsky; A. Tkachenko; Igor Y. Lapshov

The Astronomical Roentgen Telescope (ART) instrument is a hard-x-ray instrument with energy response up to 30 keV that is to be launched on board of the Spectrum Roentgen Gamma (SRG) Mission. The instrument consists of seven identical mirror modules coupled with seven CdTe strip focal-plane detectors. The mirror modules are being developed at the Marshall Space Flight Center (MSFC.) Each module has ~65 sq. cm effective area and an on-axis angular resolution of 30 arcseconds half power diameter (HPD) at 8 keV. The current status of the mirror module development and testing will be presented.


Proceedings of SPIE | 2014

SuperHERO: The Next Generation Hard X-Ray HEROES Telescope

Jessica A. Gaskin; Steven Christe; Ronald F. Elsner; K. Kilaru; Brian D. Ramsey; P. Seller; Albert Y. Shih; David Stuchlik; Douglas A. Swartz; Allyn F. Tennant; Bruce Weddendorf; Matthew D. Wilson; C. Wilson-Hodge

SuperHERO is a new high-resolution, Long Duration Balloon-capable, hard-x-ray (20-75 keV) focusing telescope for making novel astrophysics and heliophysics observations. The SuperHERO payload, currently in its proposal phase, is being developed jointly by the Astrophysics Office at NASA Marshall Space Flight Center and the Solar Physics Laboratory and the Wallops Flight Facility at NASA Goddard Space Flight Center. SuperHERO is a follow-on payload to the High Energy Replicated Optics to Explore the Sun (HEROES) balloon-borne telescope that recently flew from Fort Sumner, NM in September of 2013, and will utilize many of the same features. Significant enhancements to the HEROES payload will be made, including the addition of optics, novel solid-state multi-pixel CdTe detectors, integration of the Wallops Arc-Second Pointer and a significantly lighter gondola suitable for Long Duration Flights.


Proceedings of SPIE | 2013

Development of light weight replicated x-ray optics, II

S. Romaine; Ricardo J. Bruni; B. Choi; C. Jensen; K. Kilaru; Brian D. Ramsey; S. Sampath

NASA’S future X-ray astronomy missions will require X-ray optics that have large effective area while remaining lightweight, and cost effective. Some X-ray missions, such as XMM-Newton[1] , and the upcoming Spectrum-Röntgen- Gamma[2] mission use an electroformed nickel replication (ENR) process[3] to fabricate the nested grazing incidence X-ray telescope mirror shells for an array of moderate resolution, moderate effective area telescopes. We are developing a process to fabricate metal-ceramic replicated optics which will be lighter weight than current nickel replicated technology. Our technology development takes full advantage of the replication technique by fabricating large diameter mirrors with thin cross sections allowing maximum nesting and increase in collecting area. This will lead to future cost effective missions with large effective area and lightweight optics with good angular resolution. Recent results on fabrication and testing of these optics is presented.


Review of Scientific Instruments | 2018

Characterization and calibration of a multilayer coated Wolter optic for an imager on the Z-machine at Sandia National Laboratories

M. Wu; Bernie Kozioziemski; Julia K. Vogel; P. Lake; J. R. Fein; David J. Ampleford; Christopher Jay Bourdon; J. Ayers; P. M. Bell; D. K. Bradley; Christopher C. Walton; L. A. Pickworth; M. Pivovaroff; Andrew Ames; Ricardo J. Bruni; S. Romaine; K. Kilaru; Brian D. Ramsey

The need for a time-resolved monochromatic x-ray imaging diagnostic at photon energies >15 keV has motivated the development of a Wolter optic to study x-ray sources on the Z-machine at Sandia National Laboratories. The work is performed in both the LLNLs x-ray calibration facility and SNLs micro-focus x-ray lab. Characterizations and calibrations include alignment, measurement of throughput within the field of view (FOV), the point-spread function within the FOV both in and out of focus, and bandpass in the FOV. These results are compared with ray tracing models, showing reasonable agreement.


Review of Scientific Instruments | 2018

A Wolter imager on the Z machine to diagnose warm x-ray sources

J. R. Fein; David J. Ampleford; Julia K. Vogel; Bernie Kozioziemski; Christopher C. Walton; M. Wu; C. R. Ball; A. Ames; J. Ayers; P. M. Bell; Christopher Jay Bourdon; D. K. Bradley; R. Bruni; G. S. Dunham; P. Gard; Drew Johnson; K. Kilaru; C. Kirtley; P. Lake; A. Maurer; L. B. Nielsen-Weber; L. A. Pickworth; M. Pivovaroff; Brian D. Ramsey; O. J. Roberts; G. A. Rochau; S. Romaine; M. Sullivan

A new Wolter x-ray imager has been developed for the Z machine to study the emission of warm (>15 keV) x-ray sources. A Wolter optic has been adapted from observational astronomy and medical imaging, which uses curved x-ray mirrors to form a 2D image of a source with 5 × 5 × 5 mm3 field-of-view and measured 60-300-μm resolution on-axis. The mirrors consist of a multilayer that create a narrow bandpass around the Mo Kα lines at 17.5 keV. We provide an overview of the instrument design and measured imaging performance. In addition, we present the first data from the instrument of a Mo wire array z-pinch on the Z machine, demonstrating improvements in spatial resolution and a 350-4100× increase in the signal over previous pinhole imaging techniques.


Review of Scientific Instruments | 2018

Design and raytrace simulations of a multilayer-coated Wolter x-ray optic for the Z machine at Sandia National Laboratories

Julia K. Vogel; M. Pivovaroff; Bernie Kozioziemski; Christopher C. Walton; J. Ayers; P. M. Bell; D. K. Bradley; Marie-Anne Descalle; Stefan P. Hau-Riege; L. A. Pickworth; David J. Ampleford; C. R. Ball; Christopher Jay Bourdon; J. R. Fein; P. Gard; A. Maurer; M. Wu; A. Ames; R. Bruni; S. Romaine; K. Kilaru; O. J. Roberts; Brian D. Ramsey

Recent breakthroughs in the fabrication of small-radii Wolter optics for astrophysics allow high energy density facilities to consider such optics as novel x-ray diagnostics at photon energies of 15-50 keV. Recently, the Lawrence Livermore National Laboratory, Sandia National Laboratories (SNL), the Smithsonian Astrophysical Observatory, and the NASA Marshall Space Flight Center jointly developed and fabricated the first custom Wolter microscope for implementation in SNLs Z machine with optimized sensitivity at 17.5 keV. To achieve spatial resolution of order 100-200 microns over a field of view of 5 × 5 × 5 mm3 with high throughput and narrow energy bandpass, the geometry of the optic and its multilayer required careful design and optimization. While the geometry mainly influences resolution and the field of view of the diagnostic, the mirror coating determines the spectral response and throughput. Here we outline the details of the design and fabrication process for the first multilayer-coated Wolter I optic for SNLs Z machine (Z Wolter), including its W/Si multilayer, and present results of raytrace simulations completed to predict and verify the performance of the optic.


Proceedings of SPIE | 2015

Progress in Differential Deposition for Improving the Figures of Full-Shell Astronomical Grazing Incidence X-Ray Optics

K. Kilaru; Carolyn Atkins; Brian D. Ramsey; Jeffery K. Kolodziejczak; Tomasz M. Lis; Mikhail V. Gubarev; Stephen L. O'Dell; Jessica A. Gaskin; David M. Broadway

One of the developments at MSFC that is underway to meet the demand of high-resolution X-ray optics for future X-ray astronomy missions is the ‘differential deposition’ technique. This process corrects the axial figure profile of optics by selectively depositing material onto the mirror’s reflective surface. The process relies on accurate metrology achieved using a long trace profiler whose slope resolution is better than 1μrad. From these metrology data an error map is generated that shows the profile of material to be deposited to correct the optic’s figure. A computer-controlled, deposition system then applies this corrective coating. Simulations show that a substantial improvement in angular resolution is possible with this approach after multiple correction ‘cycles’. To assess this, custom coating systems have been developed and corrections of full-shell optics are underway. To date, a factor of < 2 improvement in the imaging quality of the optics has been demonstrated in x-ray tests after a single stage of correction.

Collaboration


Dive into the K. Kilaru's collaboration.

Top Co-Authors

Avatar

Brian D. Ramsey

University of Alabama in Huntsville

View shared research outputs
Top Co-Authors

Avatar

Jessica A. Gaskin

University of Alabama in Huntsville

View shared research outputs
Top Co-Authors

Avatar

Mikhail V. Gubarev

Marshall Space Flight Center

View shared research outputs
Top Co-Authors

Avatar

R. Elsner

Marshall Space Flight Center

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Carolyn Atkins

University of Alabama in Huntsville

View shared research outputs
Top Co-Authors

Avatar

Christopher C. Walton

Lawrence Livermore National Laboratory

View shared research outputs
Top Co-Authors

Avatar

David J. Ampleford

Sandia National Laboratories

View shared research outputs
Top Co-Authors

Avatar

Julia K. Vogel

Lawrence Livermore National Laboratory

View shared research outputs
Top Co-Authors

Avatar

Steve O'Dell

Marshall Space Flight Center

View shared research outputs
Researchain Logo
Decentralizing Knowledge