K. L. Lancaster

Hot Surface Ionic Line Emission and Cold K-Inner Shell Emission from Petawatt-Laser-Irradiated Cu Foil Targets

A hot, T{sub e} {approx} 2- to 3-keV surface plasma was observed in the interaction of a 0.7-ps petawatt laser beam with solid copper-foil targets at intensities >10{sup 20} W/cm{sup 2}. Copper K-shell spectra were measured in the range of 8 to 9 keV using a single-photon-counting x-ray CCD camera. In addition to K{sub {alpha}} and K{sub {beta}} inner-shell lines, the emission contained the Cu He{sub {alpha}} and Ly{sub {alpha}} lines, allowing the temperature to be inferred. These lines have not been observed previously with ultrafast laser pulses. For intensities less than 3 x 10{sup 18} W/cm{sup 2}, only the K{sub {alpha}} and K{sub {beta}} inner-shell emissions are detected. Measurements of the absolute K{sub {alpha}} yield as a function of the laser intensity are in agreement with a model that includes refluxing and confinement of the suprathermal electrons in the target volume.

Effect of laser-focusing conditions on propagation and monoenergetic electron production in laser-wakefield accelerators

The effect of laser-focusing conditions on the evolution of relativistic plasma waves in laser-wakefield accelerators is studied both experimentally and with particle-in-cell simulations. For short focal-length (w_{0}<lambda_{p}) interactions, beam breakup prevents stable propagation of the pulse. High field gradients lead to nonlocalized phase injection of electrons, and thus broad energy spread beams. However, for long focal-length geometries (w_{0}>lambda_{p}), a single optical filament can capture the majority of the laser energy and self-guide over distances comparable to the dephasing length, even for these short pulses (ctau approximately lambda_{p}). This allows the wakefield to evolve to the correct shape for the production of the monoenergetic electron bunches, as measured in the experiment.

Studies on the transport of high intensity laser-generated hot electrons in cone coupled wire targets

Experimental results showing hot electron penetration into Cu wires using Kα fluorescence imaging are presented. A 500 J, 1 ps laser was focused at f/3 into hollow aluminum cones joined at their tip to Cu wires of diameters from 10 to 40u2002μm. Comparison of the axially diminishing absolute intensity of Cuu2009Kα with modeling shows that the penetration of the electrons is consistent with one dimensional Ohmic potential limited transport. The laser coupling efficiency to electron energy within the wire is shown to be proportional to the cross sectional area of the wire, reaching 15% for 40u2002μm wires. Further, we find the hot electron temperature within the wire to be about 750 keV. The relevance of these data to cone coupled fast ignition is discussed.

Space and time resolved measurements of the heating of solids to ten million kelvin by a petawatt laser

The heating of plane solid targets by the Vulcan petawatt laser at powers of 0.32–0.73u2009PW and intensities of up to 4×1020u2009Wu2009cm−2 has been diagnosed with a temporal resolution of 17u2009ps and a spatial resolution of 30u2009μm, by measuring optical emission from the opposite side of the target to the laser with a streak camera. Second harmonic emission was filtered out and the target viewed at an angle to eliminate optical transition radiation. Spatial resolution was obtained by imaging the emission onto a bundle of fibre optics, arranged into a one-dimensional array at the camera entrance. The results show that a region 160u2009μm in diameter can be heated to a temperature of ~107u2009K (kT/e~u2009keV) in solid targets from 10 to 20u2009μm thick and that this temperature is maintained for at least 20u2009ps, confirming the utility of PW lasers in the study of high energy density physics. Hybrid code modelling shows that magnetic field generation prevents increased target heating by electron refluxing above a certain target thickness and that the absorption of laser energy into electrons entering the solid target was between 15–30%, and tends to increase with laser energy.

Measurements of fast electron scaling generated by petawatt laser systems

Fast electron energy spectra have been measured for a range of intensities between 1018 and 1021Wcm−2 and for different target materials using electron spectrometers. Several experimental campaigns were conducted on petawatt laser facilities at the Rutherford Appleton Laboratory and Osaka University, where the pulse duration was varied from 0.5to5ps relevant to upcoming fast ignition integral experiments. The incident angle was also changed from normal incidence to 40° in p-polarized. The results confirm a reduction from the ponderomotive potential energy on fast electrons at the higher intensities under the wide range of different irradiation conditions.

Ti Kα radiography of Cu-doped plastic microshell implosions via spherically bent crystal imaging

We show that short pulse laser generated Ti Kα radiation can be used effectively as a backlighter for radiographic imaging. This method of x-ray radiography features high temporal and spatial resolution, high signal to noise ratio, and monochromatic imaging. We present here the Ti Kα backlit images of six-beam driven spherical implosions of thin-walled 500-μm Cu-doped deuterated plastic (CD) shells and of similar implosions with an included hollow gold cone. These radiographic results were used to define conditions for the diagnosis of fast ignition relevant electron transport within imploded Cu-doped coned CD shells.

Recent fast electron energy transport experiments relevant to fast ignition inertial fusion

A number of experiments have been undertaken at the Rutherford Appleton Laboratory that were designed to investigate the physics of fast electron transport relevant to fast ignition inertial fusion. The laser, operating at a wavelength of 1054u2009nm, provided pulses of up to 350u2009J of energy on target in a duration that varied in the range 0.5–5u2009ps and a focused intensity of up to 1021u2009Wu2009cm−2. A dependence of the divergence of the fast electron beam with intensity on target has been identified for the first time. This dependence is reproduced in two-dimensional particle-in-cell simulations and has been found to be an intrinsic property of the laser–plasma interaction. A number of ideas to control the divergence of the fast electron beam are described. The fractional energy transfer to the fast electron beam has been obtained from calibrated, time-resolved, target rear-surface radiation temperature measurements. It is in the range 15–30%, increasing with incident laser energy on target. The fast electron temperature has been measured to be lower than the ponderomotive potential energy and is well described by Haines relativistic absorption model.

Observation of Postsoliton Expansion Following Laser Propagation through an Underdense Plasma

The expansion of electromagnetic postsolitons emerging from the interaction of a 30 ps, 3×10¹⁸ Wu2009cm⁻² laser pulse with an underdense deuterium plasma has been observed up to 100 ps after the pulse propagation, when large numbers of postsolitons were seen to remain in the plasma. The temporal evolution of the postsolitons has been accurately characterized with a high spatial and temporal resolution. The observed expansion is compared to analytical models and three-dimensional particle-in-cell results, revealing a polarization dependence of the postsoliton dynamics.

Hot electron generation and transport using Kα emission

We have conducted experiments on both the Vulcan and Titan laser facilities to study hot electron generation and transport in the context of fast ignition. Cu wires attached to Al cones were used to investigate the effect on coupling efficiency of plasma surround and the pre-formed plasma inside the cone. We found that with thin cones 15% of laser energy is coupled to the 40μm diameter wire emulating a 40μm fast ignition spot. Thick cone walls, simulating plasma in fast ignition, reduce coupling by x4. An increase of pre-pulse level inside the cone by a factor of 50 reduces coupling by a factor of 3.

A dual-channel, curved-crystal spectrograph for petawatt laser, x-ray backlighter source studies

A dual-channel, curved-crystal spectrograph was designed to measure time-integrated x-ray spectra in the approximately 1.5 to 2 keV range (6.2-8.2 A wavelength) from small-mass, thin-foil targets irradiated by the VULCAN petawatt laser focused up to 4x10(20) W/cm(2). The spectrograph consists of two cylindrically curved potassium-acid-phthalate crystals bent in the meridional plane to increase the spectral range by a factor of approximately 10 compared to a flat crystal. The device acquires single-shot x-ray spectra with good signal-to-background ratios in the hard x-ray background environment of petawatt laser-plasma interactions. The peak spectral energies of the aluminum He(alpha) and Ly(alpha) resonance lines were approximately 1.8 and approximately 1.0 mJ/eV sr (approximately 0.4 and 0.25 J/A sr), respectively, for 220 J, 10 ps laser irradiation.