Kafil M. Razeeb

Direct electrochemistry of horseradish peroxidase immobilized on a monolayer modified nanowire array electrode

Vertically aligned nanowire array electrodes (NAEs) were prepared by electrodeposition of gold into an anodic aluminium oxide membrane (AAM), providing an ordered three-dimensional (3D) matrix for immobilization of redox proteins. Third-generation H(2)O(2) biosensors were prepared by covalent immobilization of horseradish peroxidase (HRP) on the self-assembled monolayer modified NAEs. Direct electron transfer and electrocatalytic performances of the HRP/NAEs with different nanowire lengths (deposition time of 2, 4 and 5h) were investigated. Results showed that with longer nanowires, better performances were achieved. The HRP/NAE(5h) (5h deposition time) exhibited remarkable sensitivity (45.86 microA mM(-1) cm(-2)) towards H(2)O(2) with a detection limit of 0.42 microM (S/N=3), linearity up to 15 mM and a response time of 4s. The ordered 3D gold nanowire array with high conductivity, excellent electron transfer capability and good biocompatibility proved promising for fabricating sensitive, selective, stable and mediator-free enzymatic biosensors.

Development of field programmable modular wireless sensor network nodes for ambient systems

The goal of this work is to fabricate robust, miniature, wireless sensor modules. These provide an enabling technology platform to conduct research in creating ambient systems, through implementing wireless sensor network applications. The approach taken is to partition the wireless sensor module into a series of layers with area 25mmx25mm. This modular approach has resulted in the specification of a series of layers, including a field programmable gate array layer for digital signal processing type operations, forming the initial elements of the 25mm sensor node toolkit that can be programmed for use with different sensors depending on application. This paper highlights the development of the sensor, processing, communication and power layers, and the connection approach used to form a robust modular system. Comparisons are made with other wireless sensor nodes and application examples are given.

Silver nanowire array-polymer composite as thermal interface material

Silver nanowire arrays embedded inside polycarbonate templates are investigated as a viable thermal interface material for electronic cooling applications. The composite shows an average thermal diffusivity value of 1.89×10−5 m2 s−1, which resulted in an intrinsic thermal conductivity of 30.3 W m−1 K−1. The nanowires’ protrusion from the film surface enables it to conform to the surface roughness to make a better thermal contact. This resulted in a 61% reduction in thermal impedance when compared with blank polymer. An ∼30 nm Au film on the top of the composite was found to act as a heat spreader, reducing the thermal impedance further by 35%. A contact impedance model was employed to compare the contact impedance of aligned silver nanowire-polymer composites with that of aligned carbon nanotubes, which showed that the Young’s modulus of the composite is the defining factor in the overall thermal impedance of these composites.

Disposable biosensor based on immobilisation of glutamate oxidase on Pt nanoparticles modified Au nanowire array electrode

Novel electrochemical platform based on Pt nanoparticle modified ordered three-dimensional gold nanowire arrays (PtNP/NAEs) for the amperometric sensing of H(2)O(2) and glutamate is developed. Pt nanoparticle (PtNP) is fabricated by electrodeposition onto the 3D nanowires and characterised using scanning electron microscopy (SEM) and cyclic voltammetry. The deposited nanoparticles have an average size of 20 nm. The PtNP/NAE shows a linear response of up to 20 mM for H(2)O(2) detection with a sensitivity of 194.60 μA mM(-1) cm(-2) at 20°C. It can detect 1 μM (S/N=3) of H(2)O(2) at normal condition without using any enzyme or mediator. Analytical performance of this electrode is tested by immobilising glutamate oxidase (GlutOx) through cross-linking in the matrix of bovine serum albumin (BSA), Nafion and glutaraldehyde. At physiological pH, the biosensor showed the sensitivity of 10.76 μA mM(-1) cm(-2), with a linear range of up to 0.8 mM.

Hierarchical NiO–In2O3 microflower (3D)/ nanorod (1D) hetero-architecture as a supercapattery electrode with excellent cyclic stability

Three-dimensional (3D) hybrid nanostructured electrodes based on one-dimensional (1D) nanorod arrays have recently attracted great attention owing to their synergistic effect of three-dimensional nanostructures and application in energy storage and conversion devices. Here, we designed a heterostructured supercapattery electrode from a combination of NiO and In2O3 with a hierarchical hybrid microstructure on nickel foam (NF). Simultaneous heterogeneous growth of 1D nanorod-supported 3D microflower structures on nickel foam enhanced the non-capacitive faradaic energy storage performance due to the synergistic contribution from hierarchical hybrid nanostructure. The heterostructured electrode exhibits a high specific capacity of 766.65 C g−1 at 5 A g−1 and remains as high as 285.12 C g−1 at 30 A g−1. The composite electrode shows an excellent rate performance as a sandwich type symmetric device, offering a high specific energy of 26.24 W h kg−1 at a high power of 1752.8 W kg−1. The device shows a long term cyclic stability with 79% retention after 50 000 cycles, which is remarkable for an oxide based pseudocapacitor. These results suggest that NiO–In2O3 with hybrid micro/nano architecture could be a promising electrode for next generation supercapatteries.

FPGA implementation of spiking neural networks - an initial step towards building tangible collaborative autonomous agents

This work contains the results of an initial study into the FPGA implementation of a spiking neural network. This work was undertaken as a task in a project that aims to design and develop a new kind of tangible collaborative autonomous agent. The project intends to exploit/investigate methods for engineering emergent collective behaviour in large societies of actual miniature agents that can learn and evolve. Such multi-agent systems could be used to detect and collectively repair faults in a variety of applications where it is difficult for humans to gain access, such as fluidic environments found in critical components of material/industrial systems. The initial achievement of implementation of a spiking neural network on a FPGA hardware platform and results of a robotic wall following task are discussed by comparison with software driven robots and simulations.

Disposable sensor based on enzyme-free Ni nanowire array electrode to detect glutamate.

Enzyme free electrochemical sensor platform based on a vertically aligned nickel nanowire array (NiNAE) and Pt coated nickel nanowire array (Pt/NiNAE) have been developed to detect glutamate. Morphological characterisation of Ni electrodes was carried out using scanning and transmission electron microscopy combined with energy dispersive X-ray (SEM-EDX), X-ray diffraction (XRD) and transmission electron microscopy (TEM). Cyclic voltammetry (CV) and amperometry were used to evaluate the catalytic activity of the NiNAE and the Pt/NiNAE for glutamate. It has been found that both NiNAE and Pt/NiNAE electrodes showed remarkably enhanced electrocatalytic activity towards glutamate compared to planar Ni electrodes, and showed higher catalytic activity when compared to other metallic nanostructure electrodes such as gold nanowire array electrodes (AuNAE) and Pt coated gold nanowire array electrode (Pt/AuNAE). The sensitivity of NiNAE and Pt/NiNAE has been found to be 65 and 96 μA mM(-1) cm(-2), respectively, which is approximately 6 to 9 times higher than the state of the art glutamate sensor. Under optimal detection conditions, the as prepared sensors exhibited linear behaviour for glutamate detection in the concentration up to 8mM for both NiNAE and Pt/NiNAE with a limit of detection of 68 and 83 μM, respectively. Experimental results show that the vertically aligned ordered nickel nanowire array electrode (NiNAE) has significant promise for fabricating cost effective, enzyme-less, sensitive, stable and selective sensor platform.

Thermal diffusivity of nonfractal and fractal nickel nanowires

The potential of using nanometallic wires inside a matrix as new generation of thermal interface material led us to study the thermal diffusivity of nickel nanowires embedded inside porous alumina template. Thermal diffusivity measurements using a laser flash method showed size dependence for nickel nanowires inside nanochannel alumina (NCA) templates having nominal pore diameters of 200, 100, and 20nm. Nickel nanowires embedded inside these templates showed decreasing diffusivity values of 10.7×10−6, 8.5×10−6, and 6.5×10−6m2s−1 at 300K with decreasing wire diameter when deposited at 40°C. Nanowires fabricated at 60°C showed similar decreasing diffusivity with wire diameter, and a further 42%–48% reduction was observed when compared to 40°C samples. The modified effective medium theory (MEMT) was employed to evaluate the experimental thermal diffusivity. Calculations based on MEMT resulted in mean thermal conductivities of 70.7 and 36.2Wm−1K−1 for nickel nanowires fabricated at 40 and 60°C respectively. T...

Supercapattery Based on Binder-Free Co3(PO4)2·8H2O Multilayer Nano/Microflakes on Nickel Foam

A binder-free cobalt phosphate hydrate (Co3(PO4)2·8H2O) multilayer nano/microflake structure is synthesized on nickel foam (NF) via a facile hydrothermal process. Four different concentrations (2.5, 5, 10, and 20 mM) of Co2+ and PO4-3 were used to obtain different mass loading of cobalt phosphate on the nickel foam. The Co3(PO4)2·8H2O modified NF electrode (2.5 mM) shows a maximum specific capacity of 868.3 C g-1 (capacitance of 1578.7 F g-1) at a current density of 5 mA cm-2 and remains as high as 566.3 C g-1 (1029.5 F g-1) at 50 mA cm-2 in 1 M NaOH. A supercapattery assembled using Co3(PO4)2·8H2O/NF as the positive electrode and activated carbon/NF as the negative electrode delivers a gravimetric capacitance of 111.2 F g-1 (volumetric capacitance of 4.44 F cm-3). Furthermore, the device offers a high specific energy of 29.29 Wh kg-1 (energy density of 1.17 mWh cm-3) and a specific power of 4687 W kg-1 (power density of 187.5 mW cm-3).

Ultra-fast rate capability of a symmetric supercapacitor with a hierarchical Co3O4 nanowire/nanoflower hybrid structure in non-aqueous electrolyte

A free standing Co3O4 nanowire/nanoflower hybrid structure on flexible carbon fibre cloth (CFC) was designed via a facile hydrothermal approach followed by thermal treatment in air. The Co3O4 hybrid structure on CFC showed interesting electrochemical performance in both alkaline and organic electrolytes when used as electrodes for symmetric supercapacitors. Compared to conventional alkaline electrolytes, the fabricated symmetric cell in organic electrolyte has delivered a high rate and cyclic performance. A supercapacitor made from this hierarchical hybrid architecture showed a maximum specific capacitance of 4.8 mF cm−2 at a constant density of 3 mA cm−2 in organic electrolyte. In terms of energy and power, the symmetric supercapacitor conveyed an energy density of 4.2 mW h cm−3 with a power density of 1260 mW cm−3. Also, the device exhibited reasonable tolerance for mechanical deformation under bended conditions demonstrating the flexibility of the materials. The impressive electrochemical activity is mainly attributed to their high surface area (60.3 m2 g−1) resulting from their nano/mesoporous structure; reasonable electrical conductivity resulted from binder-free and intimate metal oxide/substrate integration and superior flexibility of the carbon fibre cloth. Thereby, it was concluded that the direct growth of the Co3O4 nanostructure on CFC is a promising electrode for the advanced flexible energy storage devices regardless of the electrolyte.