Kaja Orupõld

Particle-size effect of CuO and ZnO on biogas and methane production during anaerobic digestion

The effects of bulk- and nano-sized CuO and ZnO particles on biogas and methane production during anaerobic digestion of cattle manure were studied for a period of 14 days at 36 °C using the ISO 13641-2 guidelines. Biogas production was severely affected at concentrations of bulk and nanoparticles over 120 and 15 mg/L for CuO and 240 and 120 mg/L for ZnO, respectively. EC50 concentrations for methane inhibition were estimated to be 129 mg Cu/L for bulk CuO, 10.7 mg Cu/L for nano CuO, 101 mg Zn/L for bulk ZnO and 57.4 mg Zn/L for nano ZnO. The solubility of CuO nanoparticles in the reaction mixture was observed after 14 days of incubation and was significantly higher than the levels observed for ZnO. These results are of significant importance, as it is the first time that the effects of metal oxide particle size on biogas and methane production have been studied.

Field-portable X-ray fluorescence spectrometry as rapid measurement tool for landfill mining operations: comparison of field data vs. laboratory analysis

Landfill mining applied in reclamation at the territories of old dump sites and landfills is a known approach tended to global economic and environmental benefits as recovery of metals and energy is an important challenge. The aim of this study was to analyse the concentration of several metallic elements (Ca, Cu, Cr, Fe, K, Mn, Pb, Zn) in the fine fraction of waste derived in the landfill and to compare the results of measurements obtained by field-portable equipment with the data gained by advanced analytical tools. Atomic absorption spectrometry (AAS) and inductively coupled plasma mass spectrometry (ICP-MS) were used for the quantitative detection of metallic elements at the laboratory; whereas field-portable X-ray fluorescence spectrometry (FPXRF) was applied for rapid sample characterisation in the field (on-site). Wet digestion of samples (fine fraction of waste at landfill) was done prior analytical procedures at the laboratory conditions, but FPXRF analysis was performed using raw solid samples of waste fine fraction derived in the Kudjape Landfill in Estonia. Although the use of AAS and ICP-MS for the measurements of metals achieves more precise results, it was concluded that precision and accuracy of the measurements obtained by FPXRF is acceptable for fast approximate evaluation of quantities of metallic elements in fine fraction samples excavated from the waste at landfills. Precision and accuracy of the results provided by express method is acceptable for quick analysis or screening of the concentration of major and trace metallic elements in field projects; however, data correction can be applied by calculating moisture and organic matter content dependent on sample matrix as well as special attention must be paid on sample selection and homogenisation and number of analysed samples.

UVA-induced antimicrobial activity of ZnO/Ag nanocomposite covered surfaces

Application of efficient antimicrobial surfaces has been estimated to decrease both, the healthcare-associated infections and the spread of antibiotic-resistant bacteria. In this paper, we prepared ZnO and ZnO/Ag nanoparticle covered surfaces and evaluated their antimicrobial efficacy towards a Gram-negative bacterial model (Escherichia coli), a Gram-positive bacterial model (Staphylococcus aureus) and a fungal model (Candida albicans) in the dark and under UVA illumination. The surfaces were prepared by spin coating aliquots of ZnO and ZnO/Ag nanoparticle suspensions onto glass substrates. Surfaces contained 2 or 20 μg Zn/cm2 and 0-0.02 μg Ag/cm2. No significant antimicrobial activity of the surfaces, except of those with the highest Ag or Zn content was observed in the dark. On the other hand, UVA illuminated surfaces containing 20 μg Zn/cm2 and 2 μg Zn plus 0.02 μg Ag/cm2 caused >3 log decrease in the viable counts of E. coli and S. aureus in 30 min. As proven by brilliant blue FCF dye degradation and elemental analysis of the surfaces, this remarkable antimicrobial activity was a combined result of photocatalytic effect and release of Zn and Ag ions from surfaces. Surfaces retained significant antibacterial and photocatalytic properties after several usage cycles. Compared to bacteria, yeast C. albicans was significantly less sensitive to the prepared surfaces and only about 1 log reduction of viable count was observed after 60 min UVA illumination. In conclusion, the developed ZnO/Ag surfaces exhibit not only high antibacterial activity but also some antifungal activity.

Fractionation of Pb and Cu in the fine fraction (<10 mm) of waste excavated from a municipal landfill

The fractionation of metals in the fine fraction (<10 mm) of excavated waste from an Estonian landfill was carried out to evaluate the metal (Pb and Cu) contents and their potential towards not only mobility but also possibilities of recovery/extraction. The fractionation followed the BCR (Community Bureau of Reference) sequential extraction, and the exchangeable (F1), reducible (F2), oxidizable (F3) and residual fractions were determined. The results showed that Pb was highly associated with the reducible (F2) and oxidizable (F3) fractions, suggesting the potential mobility of this metal mainly when in contact with oxygen, despite the low association with the exchangeable fraction (F1). Cu has also shown the potential for mobility when in contact with oxygen, since high associations with the oxidizable fraction (F3) were observed. On the other hand, the mobility of metals in excavated waste can be seen as beneficial considering the circular economy and recovery of such valuables back into the economy. To conclude, not only the total concentration of metals but also a better understanding of fractionation and in which form metals are bound is very important to bring information on how to manage the fine fraction from excavated waste both in terms of environmental impacts and also recovery of such valuables in the economy.