Kamlesh D. Patel

Microfluidic-Based Cell Sorting of Francisella tularensis Infected Macrophages Using Optical Forces

We have extended the principle of optical tweezers as a noninvasive technique to actively sort hydrodynamically focused cells based on their fluorescence signal in a microfluidic device. This micro fluorescence-activated cell sorter (microFACS) uses an infrared laser to laterally deflect cells into a collection channel. Green-labeled macrophages were sorted from a 40/60 ratio mixture at a throughput of 22 cells/s over 30 min achieving a 93% sorting purity and a 60% recovery yield. To rule out potential photoinduced cell damage during optical deflection, we investigated the response of mouse macrophage to brief exposures (<4 ms) of focused 1064-nm laser light (9.6 W at the sample). We found no significant difference in viability, cell proliferation, activation state, and functionality between infrared-exposed and unexposed cells. Activation state was measured by the phosphorylation of ERK and nuclear translocation of NF-kappaB, while functionality was assessed in a similar manner, but after a lipopolysaccharide challenge. To demonstrate the selective nature of optical sorting, we isolated a subpopulation of macrophages highly infected with the fluorescently labeled pathogen Francisella tularensis subsp. novicida. A total of 10,738 infected cells were sorted at a throughput of 11 cells/s with 93% purity and 39% recovery.

Biologically functional cationic phospholipid-gold nanoplasmonic carriers of RNA

Biologically functional cationic phospholipid-gold nanoplasmonic carriers have been designed to simultaneously exhibit carrier capabilities, demonstrate improved colloidal stability, and show no cytotoxicity under physiological conditions. Cargo, such as RNA, DNA, proteins, or drugs, can be adsorbed onto or incorporated into the cationic phospholipid bilayer membrane. These carriers are able to retain their unique nanoscale optical properties under physiological conditions, making them particularly useful in a wide range of imaging, therapeutic, and gene delivery applications that utilize selective nanoplasmonic properties.

Low-distortion, high-strength bonding of thermoplastic microfluidic devices employing case-II diffusion-mediated permeant activation

We demonstrate a new method for joining thermoplastic surfaces to produce microfluidic devices. The method takes advantage of the sharply defined permeation boundary of case-II diffusion to generate dimensionally controlled, activated bonding layers at the surfaces being joined. The technique is capable of producing bonds that exhibit cohesive failure, while preserving the fidelity of fine features in the bonding interface. This approach is uniquely suited to production of layered microfluidic structures, as it allows the bond-forming interface between plastic parts to be precisely manipulated at micrometre length scales. Distortions in microfluidic device channels are limited to the size scale of the permeant-swollen layer; 6 microm deep channels are routinely produced with no detectable cross-sectional distortions. Conventional thermal diffusion bonding of identical parts yields less strongly bonded microfluidic structures with increasingly severe dimensional compressions as bonding temperatures approach the thermoplastic glass-transition temperature: a preliminary rheological analysis is consistent with the observed compressions. The bond-enhancing procedure is easily integrated in standard process flows, uses inexpensive reagents, and requires no specialized equipment.

Automated Digital Microfluidic Sample Preparation for Next-Generation DNA Sequencing

Next-generation sequencing (NGS) technology is a promising tool for identifying and characterizing unknown pathogens, but its usefulness in time-critical biodefense and public health applications is currently limited by the lack of fast, efficient, and reliable automated DNA sample preparation methods. To address this limitation, we are developing a digital microfluidic (DMF) platform to function as a fluid distribution hub, enabling the integration of multiple subsystem modules into an automated NGS library sample preparation system. A novel capillary interface enables highly repeatable transfer of liquid between the DMF device and the external fluidic modules, allowing both continuous-flow and droplet-based sample manipulations to be performed in one integrated system. Here, we highlight the utility of the DMF hub platform and capillary interface for automating two key operations in the NGS sample preparation workflow. Using an in-line contactless conductivity detector in conjunction with the capillary interface, we demonstrate closed-loop automated fraction collection of target analytes from a continuous-flow sample stream into droplets on the DMF device. Buffer exchange and sample cleanup, the most repeated steps in NGS library preparation, are also demonstrated on the DMF platform using a magnetic bead assay and achieving an average DNA recovery efficiency of 80% ± 4.8%.

A Microfluidic DNA Library Preparation Platform for Next-Generation Sequencing

Next-generation sequencing (NGS) is emerging as a powerful tool for elucidating genetic information for a wide range of applications. Unfortunately, the surging popularity of NGS has not yet been accompanied by an improvement in automated techniques for preparing formatted sequencing libraries. To address this challenge, we have developed a prototype microfluidic system for preparing sequencer-ready DNA libraries for analysis by Illumina sequencing. Our system combines droplet-based digital microfluidic (DMF) sample handling with peripheral modules to create a fully-integrated, sample-in library-out platform. In this report, we use our automated system to prepare NGS libraries from samples of human and bacterial genomic DNA. E. coli libraries prepared on-device from 5 ng of total DNA yielded excellent sequence coverage over the entire bacterial genome, with >99% alignment to the reference genome, even genome coverage, and good quality scores. Furthermore, we produced a de novo assembly on a previously unsequenced multi-drug resistant Klebsiella pneumoniae strain BAA-2146 (KpnNDM). The new method described here is fast, robust, scalable, and automated. Our device for library preparation will assist in the integration of NGS technology into a wide variety of laboratories, including small research laboratories and clinical laboratories.

cDNA normalization by hydroxyapatite chromatography to enrich transcriptome diversity in RNA-seq applications

Second-generation sequencing (SGS) has become the preferred method for RNA transcriptome profiling of organisms and single cells. However, SGS analysis of transcriptome diversity (including protein-coding transcripts and regulatory non-coding RNAs) is inefficient unless the sample of interest is first depleted of nucleic acids derived from ribosomal RNA (rRNA), which typically account for up to 95% of total intracellular RNA content. Here we describe a novel microscale hydroxyapatite chromatography (HAC) normalization method to remove eukaryotic and prokaryotic high abundant rRNA species, thereby increasing sequence coverage depth and transcript diversity across non-rRNA populations. RNA-seq analysis of Escherichia coli K-12 and human intracellular total RNA showed that HAC-based normalization enriched for all non-ribosomal RNA species regardless of RNA transcript abundance or length when compared with untreated controls. Microcolumn HAC normalization generated rRNA-depleted cDNA libraries comparable to the well-established duplex specific nuclease (DSN) normalization and Ribo-Zero rRNA-depletion methods, thus establishing microscale HAC as an effective, cost saving, and non-destructive alternative normalization technique.

Quality control of next-generation sequencing library through an integrative digital microfluidic platform

We have developed an automated quality control (QC) platform for next‐generation sequencing (NGS) library characterization by integrating a droplet‐based digital microfluidic (DMF) system with a capillary‐based reagent delivery unit and a quantitative CE module. Using an in‐plane capillary–DMF interface, a prepared sample droplet was actuated into position between the ground electrode and the inlet of the separation capillary to complete the circuit for an electrokinetic injection. Using a DNA ladder as an internal standard, the CE module with a compact LIF detector was capable of detecting dsDNA in the range of 5–100 pg/μL, suitable for the amount of DNA required by the Illumina Genome Analyzer sequencing platform. This DMF‐CE platform consumes tenfold less sample volume than the current Agilent BioAnalyzer QC technique, preserving precious sample while providing necessary sensitivity and accuracy for optimal sequencing performance. The ability of this microfluidic system to validate NGS library preparation was demonstrated by examining the effects of limited‐cycle PCR amplification on the size distribution and the yield of Illumina‐compatible libraries, demonstrating that as few as ten cycles of PCR bias the size distribution of the library toward undesirable larger fragments.

Enriching pathogen transcripts from infected samples: a capture-based approach to enhanced host-pathogen RNA sequencing.

To fully understand the interactions of a pathogen with its host, it is necessary to analyze the RNA transcripts of both the host and pathogen throughout the course of an infection. Although this can be accomplished relatively easily on the host side, the analysis of pathogen transcripts is complicated by the overwhelming amount of host RNA isolated from an infected sample. Even with the read depth provided by second-generation sequencing, it is extremely difficult to get enough pathogen reads for an effective gene-level analysis. In this study, we describe a novel capture-based technique and device that considerably enriches for pathogen transcripts from infected samples. This versatile method can, in principle, enrich for any pathogen in any infected sample. To test the techniques efficacy, we performed time course tissue culture infections using Rift Valley fever virus and Francisella tularensis. At each time point, RNA sequencing (RNA-Seq) was performed and the results of the treated samples were compared with untreated controls. The capture of pathogen transcripts, in all cases, led to more than an order of magnitude enrichment of pathogen reads, greatly increasing the number of genes hit, the coverage of those genes, and the depth at which each transcript was sequenced.

Low Temperature Cofired Ceramic Microfluidic Microsystems for High Temperature and High Pressure Applications

As an alternative material to glass, silicon, and plastics, Low Temperature Cofired Ceramic (LTCC) substrate technology is becoming increasingly important for enabling microfluidic microsystems and devices for integrated chemical and biological analysis. LTCCs simple fabrication method and unique ability to withstand high temperatures and high pressures make it well-suited for applications not possible with traditional materials. As part of Sandias initiative to develop an automated sample preparation system for the μChemlab™ bioagent detector, an integrated microfluidic lyser using LTCC technology has been fabricated, which enables the use of aqueous buffers at high temperatures without boiling by using a pressurized system. Thermal lysing of bacterial spores in a flow-through microfluidic device at temperatures as high as 220°C and pressures up to 10.3 MPa (1,500 psi) represents a new method for solubilizing spore proteins for identification and analysis, eliminating the reliance on harsh chemical red...

Isotropically etched radial micropore for cell concentration, immobilization, and picodroplet generation.

To enable several on-chip cell handling operations in a fused-silica substrate, small shallow micropores are radially embedded in larger deeper microchannels using an adaptation of single-level isotropic wet etching. By varying the distance between features on the photolithographic mask (mask distance), we can precisely control the overlap between two etch fronts and create a zero-thickness semi-elliptical micropore (e.g. 20 microm wide, 6 microm deep). Geometrical models derived from a hemispherical etch front show that micropore width and depth can be expressed as a function of mask distance and etch depth. These models are experimentally validated at different etch depths (25.03 and 29.78 microm) and for different configurations (point-to-point and point-to-edge). Good reproducibility confirms the validity of this approach to fabricate micropores with a desired size. To illustrate the wide range of cell handling operations enabled by micropores, we present three on-chip functionalities: continuous-flow particle concentration, immobilization of single cells, and picoliter droplet generation. (1) Using pressure differentials, particles are concentrated by removing the carrier fluid successively through a series of 44 shunts terminated by 31 microm wide, 5 microm deep micropores. Theoretical values for the concentration factor determined by a flow circuit model in conjunction with finite volume modeling are experimentally validated. (2) Flowing macrophages are individually trapped in 20 microm wide, 6 microm deep micropores by hydrodynamic confinement. The translocation of transcription factor NF-kappaB into the nucleus upon lipopolysaccharide stimulation is imaged by fluorescence microscopy. (3) Picoliter-sized droplets are generated at a 20 microm wide, 7 microm deep micropore T-junction in an oil stream for the encapsulation of individual E. coli bacteria cells.