Kang Hee Ku

Size-Controlled Nanoparticle-Guided Assembly of Block Copolymers for Convex Lens-Shaped Particles

The tuning of interfacial properties at selective and desired locations on the particles is of great importance to create the novel structured particles by breaking the symmetry of their surface property. Herein, a dramatic transition of both the external shape and internal morphology of the particles of polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) was induced by precise positioning of size-controlled Au nanoparticle surfactants (Au NPs). The size-dependent assembly of the Au NPs was localized preferentially at the interface between the P4VP domain at the particle surface and the surrounding water, which generated a balanced interfacial interaction between two different PS/P4VP domains of the BCP particles and water, producing unique convex lens-shaped BCP particles. In addition, the neutralized interfacial interaction, in combination with the directionality of the solvent-induced ordering of the BCP domains from the interface of the particle/water, generated defect-free, vertically ordered porous channels within the particles. The mechanism for the formation of these novel nanostructures was investigated systemically by varying the size and the volume fraction of the Au NPs. Furthermore, these convex lens-shaped particles with highly ordered channels can be used as a microlens, in which the light can be concentrated toward the focal point with enhanced near-field signals. And, these particles can possess additional optical properties such as unique distribution of light scattering as a result of the well-ordered Au cylinders that filled into the channels, which hold great promise for use in optical, biological-sensing, and imaging applications.

Gold-Decorated Block Copolymer Microspheres with Controlled Surface Nanostructures

Gold-decorated block copolymer microspheres (BCP-microspheres) displaying various surface morphologies were prepared by the infiltration of Au precursors into polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) microspheres. The microspheres were fabricated by emulsifying the PS-b-P4VP polymers in chloroform into a surfactant solution in water, followed by the evaporation of chloroform. The selective swelling of the P4VP domains in the microspheres by the Au precursor under acidic conditions resulted in the formation of Au-decorated BCP-microspheres with various surface nanostructures. As evidenced by transmission electron microscopy (TEM) and scanning electron microscopy (SEM) measurements, dotted surface patterns were formed when microspheres smaller than 800 nm were synthesized, whereas fingerprint-like surface patterns were observed with microspheres larger than 800 nm. Au nanoparticles (NPs) were located inside P4VP domains near the surfaces of the prepared microspheres, as confirmed by TEM. The optical properties of the BCP-microspheres were characterized using UV-vis absorption spectroscopy and fluorescence lifetime measurements. A maximum absorption peak was observed at approximately 580 nm, indicating that Au NPs are densely packed into P4VP domains on the microspheres. Our approach for creating Au-NP-hybrid BCP-microspheres can be extended to other NP systems such as iron-oxide or platinum NPs. These precursors can also be selectively incorporated into P4VP domains and induce the formation of hybrid BCP-microspheres with controlled surface nanostructures.

Multicolor Emission of Hybrid Block Copolymer–Quantum Dot Microspheres by Controlled Spatial Isolation of Quantum Dots

Multicolor or white light-emitting systems have attracted great attention because of their potential uses as lighting sources and full-color displays. [ 1 ] In recent years, numerous efforts have been devoted to the development of low-cost, simple processes for the fabrication of pure white-light sources as an alternative for conventional lighting sources. [ 2–4 ] Fluorescent quantum dots (QDs) have been explored as one of the promising candidate materials due to their pure color emission spectra, high fl uorescence quantum yield, and photochemical stability. [ 5 , 6 ] However, the emission spectrum produced by each individual QD is narrow, thus requiring simultaneous emission from more than two colored QDs to illuminate across the visible regime. Typically, this is achieved through a combination of either three different QDs emitting red, green and blue light or two different ones emitting orange/red and green/blue light. In such a system, undesired Förster resonance energy transfer (FRET) between QDs often occurs, decreasing the effi ciency of the white light emission. [ 7 , 8 ] The controlled spatial isolation of multiple QDs is made necessary by the strong dependence of the energy-transfer process on the donor-acceptor distance on the nanometer scale. [ 9 , 10 ]

Soft Patchy Particles of Block Copolymers from Interface-Engineered Emulsions

We report a simple and practical method for creating colloidal patchy particles with a variety of three-dimensional shapes via the evaporation-induced assembly of polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) block copolymer (BCP) in an oil-in-water emulsion. Depending on the particle volume, a series of patchy particles in the shapes of snowmen, dumbbells, triangles, tetrahedra, and raspberry can be prepared, which are then precisely tuned by modulating the interfacial interaction at the particle/water interface using a mixture of two different surfactants. Moreover, for a given interfacial interaction, the stretching penalty of the BCPs in the patchy particles can be systematically controlled by adding P4VP homopolymers, which decreases the number of patches of soft particles from multiple patches to a single patch but increases the size of the patch. Calculations based on the strong segregation theory supported the experimental observation of various soft patchy particles and identified the underlying principles of their formation with tunable 3D structures.

Particles with Tunable Porosity and Morphology by Controlling Interfacial Instability in Block Copolymer Emulsions

A series of porous block copolymer (BCP) particles with controllable morphology and pore sizes was fabricated by tuning the interfacial behavior of BCP droplets in oil-in-water emulsions. A synergistic adsorption of polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) BCPs and sodium dodecyl sulfate (SDS) to the surface of the emulsion droplet induced a dramatic decrease in the interfacial tension and generated interfacial instability at the particle surface. In particular, the SDS concentration and the P4VP volume fraction of PS-b-P4VP were key parameters in determining the degree of interfacial instability, leading to different types of particles including micelles, capsules, closed-porosity particles, and open-porosity particles with tunable pore sizes ranging from 10 to 500 nm. The particles with open-porosity could be used as pH-responsive, high capacity delivery systems where the uptake and release of multiple dyes could be achieved.

Stimuli‐Responsive, Shape‐Transforming Nanostructured Particles

Development of particles that change shape in response to external stimuli has been a long-thought goal for producing bioinspired, smart materials. Herein, the temperature-driven transformation of the shape and morphology of polymer particles composed of polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) block copolymers (BCPs) and temperature-responsive poly(N-isopropylacrylamide) (PNIPAM) surfactants is reported. PNIPAM acts as a temperature-responsive surfactant with two important roles. First, PNIPAM stabilizes oil-in-water droplets as a P4VP-selective surfactant, creating a nearly neutral interface between the PS and P4VP domains together with cetyltrimethylammonium bromide, a PS-selective surfactant, to form anisotropic PS-b-P4VP particles (i.e., convex lenses and ellipsoids). More importantly, the temperature-directed positioning of PNIPAM depending on its solubility determines the overall particle shape. Ellipsoidal particles are produced above the critical temperature, whereas convex lens-shaped particles are obtained below the critical temperature. Interestingly, given that the temperature at which particle shape change occurs depends solely on the lower critical solution temperature (LCST) of the polymer surfactants, facile tuning of the transition temperature is realized by employing other PNIPAM derivatives with different LCSTs. Furthermore, reversible transformations between different shapes of PS-b-P4VP particles are successfully demonstrated using a solvent-adsorption annealing with chloroform, suggesting great promise of these particles for sensing, smart coating, and drug delivery applications.