Kangbing Wu

4-Amino-1-(3-mercapto-propyl)-pyridine hexafluorophosphate ionic liquid functionalized gold nanoparticles for IgG immunosensing enhancement.

A novel ionic liquid, 4-amino-1-(3-mercapto-propyl)-pyridine hexafluorophosphate (AMPPH), was successfully synthesized and characterized. Subsequently, AMPPH was used as a functional monomer to fabricate AMPPH-modified gold nanoparticles (AMPPH-AuNPs) via a one-pot synthesis method. The as-prepared AMPPH-AuNPs were confirmed with transmission electron microscopy and X-ray photoelectron spectroscopy. AMPPH-AuNPs were used to construct a biocompatible interface to immobilize rabbit anti-human IgG (anti-HIgG) onto a glassy carbon electrode (GCE) surface, followed by a cross-linking step with glutaraldehyde to fabricate an anti-HIgG-AMPPH-AuNPs/GCE. The nonspecific binding sites were enclosed with bovine serum albumin (BSA) to develop an immunosensor for human IgG. Electrochemical impedance spectroscopy, cyclic voltammetry and differential pulse voltammetry were used to investigate the electrochemical properties of the developed immunosensor. The results indicate that AMPPH-AuNPs can improve the immunosensing performance. The current response of the immunosensor was found linearly related to human IgG concentration in the range of 0.1-5.0 ng mL(-1) and 5.0-100.0 ng mL(-1). The detection limit is estimated to be 0.08 ng mL(-1) (S/N = 3). The obtained immunosensor was successfully applied to the analysis human IgG immunoglobulin in human serum, and the results were well consistent with ELISA method.

Electrochemical Functionalization of N-Methyl-2-pyrrolidone-Exfoliated Graphene Nanosheets as Highly Sensitive Analytical Platform for Phenols

Graphene nanosheets (GS) were easily prepared from graphite via a one-step ultrasonic exfoliation approach using N-methyl-2-pyrrolidone (NMP) as the solvent. Compared with the widely used graphene oxide (GO) obtained by multistep chemical oxidation, the NMP-exfoliated GS exhibited apparently better electrochemical activity toward the oxidation of a series of phenols like hydroquinone, catechol, 4-chlorophenol, and 4-nitrophenol. Interestingly, the electrochemical activity of GS toward these phenols can be further enhanced by simply anodizing at 1.8 V for 2 min (denoted as EGS), reflected by the apparently enlarged oxidation peak currents in voltammograms and the obviously reduced charge transfer resistance in electrochemical impedance spectra (EIS). Characterizations by techniques like X-ray photoelectron spectra (XPS), Raman spectra, and atomic force microscopy (AFM) demonstrated that the introduction of new oxygen-containing groups or edge-plane defects and the enhanced surface roughness were responsible for the enhanced activity of EGS. Thereafter, a simple electrochemical method for the highly sensitive detection of phenols was established and the detection limits were 0.012 μM, 0.015 μM, 0.01 μM, and 0.04 μM for hydroquinone, catechol, 4-chlorophenol, and 4-nitrophenol, respectively. The facile synthesis of EGS, together with its high electrochemical activity, thus created a novel platform for developing highly sensitive electrochemical sensing systems.

White-light-exciting, layer-by-layer-assembled ZnCdHgSe quantum dots/polymerized ionic liquid hybrid film for highly sensitive photoelectrochemical immunosensing of neuron specific enolase.

ZnCdHgSe quantum dots (QDs) functionalized with N-acetyl-l-cysteine were synthesized and characterized. Through layer-by-layer assembling, the ZnCdHgSe QDs was integrated with a polymerized 1-decyl-3-[3-pyrrole-1-yl-propyl]imidazolium tetrafluoroborate (PDPIT) ionic liquid film modified indium tin oxide (ITO) electrode to fabricated a photoelectrochemical interface for the immobilization of rabbit antihuman neuron specific enolase (anti-NSE). After being treated with glutaraldehyde vapor and bovine serum albumin successively, an anti-NSE/ZnCdHgSe QDs/PDPIT/ITO sensing platform was established. Simplely using a white-light LED as an excitation source, the immunoassay of neuron specific enolase (NSE) was achieved through monitoring the photocurrent variation. The polymerized ionic liquid film was demonstrated to be an important element to enhance the photocurrent response of ZnCdHgSe QDs. The anti-NSE/ZnCdHgSe QDs/PDPIT/ITO based immunosensor presents excellent performances in neuron specific enolase determination. The photocurrent variation before and after being interacted with NSE exhibits a good linear relationship with the logarithm of its concentration (log cNSE) in the range from 1.0 pg mL(-1) to 100 ng mL(-1). The limit of detection of this immunosensor is able to reach 0.2 pg mL(-1) (S/N = 3). The determination of NSE in clinical human sera was also demonstrated using anti-NSE/ZnCdHgSe QDs/PDPIT/ITO electrode. The results were found comparable with those obtained by using enzyme-linked immunosorbent assay method.

Molecularly imprinted electrochemical sensing interface based on in-situ-polymerization of amino-functionalized ionic liquid for specific recognition of bovine serum albumin.

A molecularly imprinted polymer film was in situ polymerized on a carboxyl functionalized multi-walled carbon nanotubes modified glassy carbon electrode surface under room temperature. This technique provides a promising imprinting approach for protein in an aqueous solution using 3-(3-aminopropyl)-1-vinylimidazolium tetrafluoroborate ionic liquid as functional monomer, N, N-methylenebisacrylamide as crossing linker, ammonium persulfate and N,N,N,N-tetramethylethylenediamine as initiator, and bovine serum albumin (BSA) as template. The molecularly imprinted polymerized ionic liquid film shows enhanced accessibility, high specificity and sensitivity towards BSA. Electrochemical sensing performance of the imprinted sensor was thoroughly investigated using K3Fe[CN]6/K4Fe[CN]6 as electroactive probes. Under optimal conditions, the current difference before and after specific recognition of BSA was found linearly related to its concentration in the range from 1.50×10(-9) to 1.50×10(-6) mol L(-1). The detection limit was calculated to be 3.91×10(-10) mol L(-1) (S/N=3). The practical application of the imprinted sensor was demonstrated by determining BSA in liquid milk samples.

Electrochemical sensor for hazardous food colourant quinoline yellow based on carbon nanotube-modified electrode

A novel electrochemical method using multi-wall carbon nanotube (MWNT) film-modified electrode was developed for the detection of quinoline yellow. In pH 8 phosphate buffer, an irreversible oxidation peak at 0.71V was observed for quinoline yellow. Compared with the unmodified electrode, the MWNT film-modified electrode greatly increases the oxidation peak current of quinoline yellow, showing notable enhancement effect. The effects of pH value, amount of MWNT, accumulation potential and time were studied on the oxidation peak current of quinoline yellow. The linear range is from 0.75 to 20mgL(-1), and the limit of detection is 0.5mgL(-1). It was applied to the detection of quinoline yellow in commercial soft drinks, and the results consisted with the value that obtained by high-performance liquid chromatography.

Electrochemical sensing chemical oxygen demand based on the catalytic activity of cobalt oxide film

Cobalt oxide sensing film was in situ prepared on glassy carbon electrode surface via constant potential oxidation. Controlling at 0.8 V in NaOH solution, the high-valence cobalt catalytically oxidized the reduced compounds, decreasing its surface amount and current signal. The current decline was used as the response signal of chemical oxygen demand (COD) because COD represents the summation of reduced compounds in water. The surface morphology and electrocatalytic activity of cobalt oxide were readily tuned by variation of deposition potential, time, medium and Co(2+) concentration. As confirmed from the atomic force microscopy measurements, the cobalt oxide film, that prepared at 1.3 V for 40 s in pH 4.6 acetate buffer containing 10 mM Co(NO(3))(2), possesses large surface roughness and numerous three-dimensional structures. Electrochemical tests indicated that the prepared cobalt oxide exhibited high electrocatalytic activity to the reduced compounds, accompanied with strong COD signal enhancement. As a result, a novel electrochemical sensor with high sensitivity, rapid response and operational simplicity was developed for COD. The detection limit was as low as 1.1 mg L(-1). The analytical application was studied using a large number of lake water samples, and the accuracy was tested by standard method.

Highly-sensitive and rapid detection of ponceau 4R and tartrazine in drinks using alumina microfibers-based electrochemical sensor

Alumina microfibers were prepared and used to construct an electrochemical sensor for simultaneous detection of ponceau 4R and tartrazine. In pH 3.6 acetate buffer, two oxidation waves at 0.67 and 1.01 V were observed. Due to porous structures and large surface area, alumina microfibers exhibited high accumulation efficiency to ponceau 4R and tartrazine, and increased their oxidation signals remarkably. The oxidation mechanisms were studied, and their oxidation reaction involved one electron and one proton. The influences of pH value, amount of alumina microfibers and accumulation time were examined. As a result, a highly-sensitive, rapid and simple electrochemical method was newly developed for simultaneous detection of ponceau 4R and tartrazine. The detection limits were 0.8 and 2.0 nM for ponceau 4R and tartrazine. This new sensor was used in different drink samples, and the results consisted with the values that obtained by high-performance liquid chromatography.

Morphology-controlled electrochemical sensing amaranth at nanomolar levels using alumina

Different-shaped aluminas were readily prepared via hydrothermal reaction. It was found that the morphology and the electrochemical sensing properties of alumina were heavily dependent on the reaction time. When extending the reaction time from 6 h to 24 h, the obtained alumina samples changed from amorphous bumps to regular microfibers in diameter of 200 nm, as confirmed by scanning electron microscopy. Transmission electron microscopy observation revealed that longer reaction time was beneficial for the formation of porous and uniform fiber-like structures. Electrochemical tests proved that alumina microfibers were more active for the oxidation of amaranth and exhibited much higher enhancement effect, compared with alumina bumps. On the surface of alumina microfibers, the oxidation peak currents of amaranth increased remarkably. The influences of pH value, amount of alumina microfibers, and accumulation time on the signal enhancement of amaranth were discussed. As a result, a novel electrochemical method was developed for the detection of amaranth. The linear range was from 1 to 150 nM, and the detection limit was 0.75 nM after 1-min accumulation. The analytical application in drink samples was investigated, and the results consisted with the values that obtained by high-performance liquid chromatography.

Electrochemical immunoassay for the prostate specific antigen using a reduced graphene oxide functionalized with a high molecular-weight silk peptide

AbstractHigh molecular-weight silk peptide (SP) was used to functionalize the surface of nanosheets of reduced graphene oxide (rGO). The SP-rGO nanocomposite was then mixed with mouse anti-human prostate specific antigen monoclonal antibody (anti-PSA) and coated onto a glassy carbon electrode to fabricate an immunosensor. By using the hexacyanoferrate redox system as electroactive probe, the immunosensor was characterized by voltammetry and electrochemical impedance spectroscopy. The peak current, measured at the potential of 0.24xa0V (vs. SCE), is distinctly reduced after binding prostate specific antigen (PSA). Response (measured by differential pulse voltammetry) is linearly related to PSA concentration in the range from 0.1 to 5.0xa0ngu2009·u2009mL−1 and from 5.0 to 80.0xa0ng∙mL−1, and the detection limit is 53xa0pg∙mL−1 (at an SNR of 3). The immunosensor was successfully applied to the determination of PSA in clinical serum samples, and the results were found to agree well with those obtained with an enzyme-linked immunosorbent assay.n Graphical AbstractNanosheets of reduced graphene oxide were functionalized with silk peptide and used to immobilize anti-PSA to fabricate an immunosensor for PSA.

Versatile matrix for constructing enzyme-based biosensors.

A versatile matrix was fabricated and utilized as a universal interface for the construction of enzyme-based biosensors. This matrix was formed on the gold electrode via combining self-assembled monolayer of 2,3-dimercaptosuccinic acid with gold nanoparticles. Gold nanoparticles were electrochemically deposited. Electrochemistry of three redox enzymes (catalase, glucose oxidase, and horseradish peroxidase) was investigated on such a matrix. The electrocatalytic monitoring of hydrogen peroxide and glucose was conducted on this matrix after being coated with those enzymes. On them the monitoring of hydrogen peroxide and glucose shows rapid response times, wide linear working ranges, low detection limits, and high enzymatic affinities. This matrix is thus a versatile and suitable platform to develop highly sensitive enzyme-based biosensors.