Karina Kubiak-Ossowska

Mechanism of hen egg white lysozyme adsorption on a charged solid surface

The mechanism of hen egg white lysozyme (HEWL) adsorption on a negatively charged, hydrophilic surface has been studied using atomistic molecular dynamics (MD) simulation. Sixteen 90 ns trajectories provide adequate data to allow a detailed description of the adsorption process to be formulated. Two distinct adsorption sites have been identified. The main one is located on the N,C-terminal protein face and comprises Arg128 (the crucial one), supplemented by Arg125, Arg5, and Lys1; the minor one is used accidentally and contains only Arg68. Adsorption of this protein is driven by electrostatics, where the orientation of the protein dipole moment defines the direction of protein movement. The diffusion range on the surface depends on protein side-chain penetration through the surface water layers. This is facilitated by the long-range electric field of the charged surface, which can align polar side chains to be perpendicular to the surface. A simulation of adsorption onto a neutral ionic surface shows no such surface water layer penetration. Therefore, protein flexibility is seen to be an important factor, and to adsorb the HEWL has to adjust its structure. Nevertheless, at a flat surface only a slight loss of α-helical content is required. The adsorbed HEWL molecule is oriented between side-on and end-on ways, where the angle between the protein long axis (which mostly approximates the dipole moment) and the surface varies between 45° and 90°. Simulations with targeted mutations confirm the picture that emerges from these studies. The active site is located on the opposite face to the main adsorption site; hence, the activity of the immobilized HEWL should not be affected by the surface interactions. Our results provide a detailed insight into the adsorption mechanism and protein mobility at the surface. This knowledge will aid the proper interpretation of experimental results and the design of new experiments and functional systems.

What governs protein adsorption and immobilization at a charged solid surface

The adsorption of hen egg white lysozyme at a model charged surface is studied using fully atomistic molecular dynamics simulations. The simulations are performed over a 90 ns time scale which is sufficient to observe rotational and translational steps in the adsorption process. Electrostatics is found to play a key role in guiding the protein to the favorable binding orientation with the N,C-terminal face against the substrate. However, full immobilization appears to only occur through the strong interaction of Arg128 with the surface, facilitated by the protein’s flexibility at the terminal face. Simulated mutation at this residue confirms its crucial role. This work demonstrates that electrostatics alone might not be sufficient to guide the development of material systems that exploit protein adsorption and immobilization.

Multiprotein Interactions during Surface Adsorption: a Molecular Dynamics Study of Lysozyme Aggregation at a Charged Solid Surface

Multiprotein adsorption of hen egg white lysozyme at a model charged ionic surface is studied using fully atomistic molecular dynamics simulations. Simulations with two, three, and five proteins, in various orientations with respect the surface, are performed over a 100 ns time scale. Mutated proteins with point mutations at the major (Arg128 and Arg125) and minor (Arg68) surface adsorption sites are also studied. The 100 ns time scale used is sufficient to observe protein translations, rotations, adsorption, and aggregation. Two competing processes of particular interest are observed, namely surface adsorption and protein–protein aggregation. At low protein concentration, the proteins first adsorb in isolation and can then reorientate on the surface to aggregate. At high concentration, the proteins aggregate in the solution and then adsorb in nonspecific ways. This work demonstrates the role of protein concentration in adsorption, indicates the residues involved in both types of interaction (protein–protein and protein–surface), and gives an insight into processes to be considered in the development of new functionalized material systems.

Protein diffusion and long-term adsorption states at charged solid surfaces

The diffusion pathways of lysozyme adsorbed to a model charged ionic surface are studied using fully atomistic steered molecular dynamics simulation. The simulations start from existing protein adsorption trajectories, where it has been found that one particular residue, Arg128 at the N,C-terminal face, plays a crucial role in anchoring the lysozyme to the surface [Langmuir 2010 , 26 , 15954 - 15965]. We first investigate the desorption pathway for the protein by pulling the Arg128 side chain away from the surface in the normal direction, and its subsequent readsorption, before studying diffusion pathways by pulling the Arg128 side chain parallel to the surface. We find that the orientation of this side chain plays a decisive role in the diffusion process. Initially, it is oriented normal to the surface, aligning in the electrostatic field of the surface during the adsorption process, but after resorption it lies parallel to the surface, being unable to return to its original orientation due to geometric constraints arising from structured water layers at the surface. Diffusion from this alternative adsorption state has a lower energy barrier of ∼0.9 eV, associated with breaking hydrogen bonds along the pathway, in reasonable agreement with the barrier inferred from previous experimental observation of lysozyme surface clustering. These results show the importance of studying protein diffusion alongside adsorption to gain full insight into the formation of protein clusters and films, essential steps in the future development of functionalized surfaces.

Bovine Serum Albumin Adsorption at a Silica Surface Explored by Simulation and Experiment

Molecular details of BSA adsorption on a silica surface are revealed by fully atomistic molecular dynamics (MD) simulations (with a 0.5 μs trajectory), supported by dynamic light scattering (DLS), zeta potential, multiparametric surface plasmon resonance (MP-SPR), and contact angle experiments. The experimental and theoretical methods complement one another and lead to a wider understanding of the mechanism of BSA adsorption across a range of pH 3-9. The MD results show how the negatively charged BSA at pH7 adsorbs to the negatively charged silica surface, and reveal a unique orientation with preserved secondary and tertiary structure. The experiments then show that the protein forms complete monolayers at ∼ pH6, just above the proteins isoelectric point (pH5.1). The surface contact angle is maximum when it is completely coated with protein, and the hydrophobicity of the surface is understood in terms of the simulated protein conformation. The adsorption behavior at higher pH > 6 is also consistently interpreted using the MD picture; both the contact angle and the adsorbed protein mass density decrease with increasing pH, in line with the increasing magnitude of negative charge on both the protein and the surface. At lower pH < 5 the protein starts to unfold, and the adsorbed mass dramatically decreases. The comprehensive picture that emerges for the formation of oriented protein films with preserved native conformation will help guide efforts to create functional films for new technologies.

Spontaneous Membrane-Translocating Peptide Adsorption at Silica Surfaces: A Molecular Dynamics Study

Spontaneous membrane-translocating peptides (SMTPs) have recently been shown to directly penetrate cell membranes. Adsorption of a SMTP, and some engineered extensions, at model silica surfaces is studied herein using fully atomistic molecular dynamics simulations in order to assess their potential to construct novel drug delivery systems. The simulations are designed to reproduce the electric fields above single, siloxide-rich charged surfaces, and the trajectories indicate that the main driving force for adsorption is electrostatic. An increase in the salt concentration slows down but does not prevent adsorption of the SMTP to the surface; it also does not result in peptide desorption, suggesting additional binding via hydrophobic forces. The results are used to design extensions to the peptide sequence which we find enhance adsorption but do not affect the adsorbed conformation. We also investigate the effect of surface hydroxylation on the peptide adsorption. In all cases, the final adsorbed conformations are with the peptide flattened to the surface with arginine residues, which are key to the peptide’s function, anchoring it to the surface so that they are not exposed to solution. This conformation could impact their role in membrane translocation and thus has important implications for the design of future drug delivery vehicles.

Fibronectin module FNIII9 adsorption at contrasting solid model surfaces studied by atomistic molecular dynamics

The mechanism of human fibronectin adhesion synergy region (known as integrin binding region) in repeat 9 (FN(III)9) domain adsorption at pH 7 onto various and contrasting model surfaces has been studied using atomistic molecular dynamics simulations. We use an ionic model to mimic mica surface charge density but without a long-range electric field above the surface, a silica model with a long-range electric field similar to that found experimentally, and an Au {111} model with no partial charges or electric field. A detailed description of the adsorption processes and the contrasts between the various model surfaces is provided. In the case of our model silica surface with a long-range electrostatic field, the adsorption is rapid and primarily driven by electrostatics. Because it is negatively charged (-1e), FN(III)9 readily adsorbs to a positively charged surface. However, due to its partial charge distribution, FN(III)9 can also adsorb to the negatively charged mica model because of the absence of a long-range repulsive electric field. The protein dipole moment dictates its contrasting orientation at these surfaces, and the anchoring residues have opposite charges to the surface. Adsorption on the model Au {111} surface is possible, but less specific, and various protein regions might be involved in the interactions with the surface. Despite strongly influencing the protein mobility, adsorption at these model surfaces does not require wholesale FN(III)9 conformational changes, which suggests that the biological activity of the adsorbed protein might be preserved.

Lysozyme adsorption at a silica surface using simulation and experiment: effects of pH on protein layer structure

Hen Egg White Lysozyme (HEWL) is a widely used exemplar to study protein adsorption on surfaces and interfaces. Here we use fully atomistic Molecular Dynamics (MD) simulations, Multi-Parametric Surface Plasmon Resonance (MP-SPR), contact angle and zeta potential measurements to study HEWL adsorption at a silica surface. The simulations provide a detailed description of the adsorption mechanism and indicate that at pH7 the main adsorption driving force is electrostatics, supplemented by weaker hydrophobic forces. Moreover, they reveal the preferred orientation of the adsorbed protein and show that its structure is only slightly altered at the interface with the surface. This provides the basis for interpreting the experimental results, which indicate the surface adsorbs a close-packed monolayer at about pH10 where the surface has a large negative zeta potential and the HEWL is positively charged. At higher pH, the adsorption amount of the protein layer is greatly reduced due to the loss of charge on the protein. At lower pH, the smaller zeta potential of the surface leads to lower HEWL adsorption. These interpretations are complemented by the contact angle measurements that show how the hydrophobicity of the surface is greatest when the surface coverage is highest. The simulations provide details of the hydrophobic residues exposed to solution by the adsorbed HEWL, completing the picture of the protein layer structure.

Initial stages of beta-amyloid A 1 40 and A 1 42 oligomerization observed using fluorescence decay and molecular dynamics analyses of tyrosine

The development of Alzheimers disease is associated with the aggregation of the beta-amyloid peptides Aβ1-40 and Aβ1-42. It is believed that the small oligomers formed during the early stages of the aggregation are neurotoxic and involved in the process of neurodegeneration. In this paper we use fluorescence decay measurements of beta-amyloid intrinsic fluorophore tyrosine (Tyr) and molecular dynamics (MD) simulations to study the early stages of oligomer formation for the Aβ1-40 and Aβ1-42 peptides in vitro. We demonstrate that the lifetime distributions of the amyloid fluorescence decay efficiently describe changes in the complex Tyr photophysics during the peptide aggregation and highlight the differences in aggregation performance of the two amyloids. Tyr fluorescence decay is found to be a more sensitive sensor of Aβ1-40 aggregation than Aβ1-42 aggregation. The MD simulation of the peptide aggregation is compared with the experimental data and supports a four-rotamer model of Tyr.

Steering protein adsorption at charged surfaces: electric fields and ionic screening

Protein adsorption at charged surfaces is a common process in the development of functional technological devices. Accurately reproducing the environment above the surface in simulations is essential for understanding how the adsorption process can be influenced and utilised. Here we present a simulation strategy that includes the electric field above the charged surface as well as the screening ions in solution, using standard molecular dynamics tools. With this approach we investigate the adsorption of Hen Egg White Lysozyme (HEWL) onto a model charged silica surface. We find that the screening effects of the ions slow down the adsorption process, giving the protein more time to find its optimal orientation as it adsorbs. Furthermore, we find that the concentrated ionic region directly above the surface helps to stabilise the protein structure in its adsorbed state. Together these effects imply that the adsorbed HEWL might retain its biological activity, with its active site exposed to solution rather than to the surface. Furthermore, this work shows how the steering effects of the electric field, coupled to the ionic screening, might be used to develop general strategies for surface functionalization through protein adsorption for technological applications.