Karl F. Olsen

Vascular Endothelial Cell-specific MicroRNA-15a Inhibits Angiogenesis in Hindlimb Ischemia

Background: MicroRNAs mediate angiogenesis in both physiological and pathological conditions, but underlying molecular mechanisms are largely unexplored. Results: Endothelial miR-15a negatively regulates angiogenesis in vivo and in vitro by suppression of FGF2 and VEGF. Conclusion: MiR-15a inhibits endothelial autonomous angiogenesis. Significance: MiR-15a is a negative regulator of angiogenesis and a potential target for the restorative therapy of ischemic diseases. The effects and potential mechanisms of the vascular endothelial cell (EC)-enriched microRNA-15a (miR-15a) on angiogenesis remain unclear. Here, we show a novel finding that EC-selective miR-15a transgenic overexpression leads to reduced blood vessel formation and local blood flow perfusion in mouse hindlimbs at 1–3 weeks after hindlimb ischemia. Mechanistically, gain- or loss-of-miR-15a function by lentiviral infection in ECs significantly reduces or increases tube formation, cell migration, and cell differentiation, respectively. By FGF2 and VEGF 3′-UTR luciferase reporter assays, Real-time PCR, and immunoassays, we further identified that the miR-15a directly targets FGF2 and VEGF to facilitate its anti-angiogenic effects. Our data suggest that the miR-15a in ECs can significantly suppress cell-autonomous angiogenesis through direct inhibition of endogenous endothelial FGF2 and VEGF activities. Pharmacological modulation of miR-15a function may provide a new therapeutic strategy to intervene against angiogenesis in a variety of pathological conditions.

Self‐Healing Microencapsulation of Biomacromolecules without Organic Solvents

Microencapsulation of biomacromolecules in PLGA is routinely performed with organic solvent through multiple complex steps deleterious to the biomacromolecule. The new self-healing based PLGA microencapsulation obviates micronization- and organic solvent-induced protein damage, provides very high encapsulation efficiency, exhibit stabilization and slow release of labile tetanus protein antigen, and provides long-term testosterone suppression in rats following a single injection of encapsulated leuprolide.

The nature of peptide interactions with acid end-group PLGAs and facile aqueous-based microencapsulation of therapeutic peptides.

An important poorly understood phenomenon in controlled-release depots involves the strong interaction between common cationic peptides and low Mw free acid end-group poly(lactic-co-glycolic acids) (PLGAs) used to achieve continuous peptide release kinetics. The kinetics of peptide sorption to PLGA was examined by incubating peptide solutions of 0.2-4mM octreotide or leuprolide acetate salts in a 0.1M HEPES buffer, pH7.4, with polymer particles or films at 4-37°C for 24h. The extent of absorption/loading of peptides in PLGA particles/films was assayed by two-phase extraction and amino acid analysis. Confocal Raman microspectroscopy, stimulated Raman scattering (SRS) and laser scanning confocal imaging, and microtome sectioning techniques were used to examine peptide penetration into the polymer phase. The release of sorbed peptide from leuprolide-PLGA particles was evaluated both in vitro (PBST+0.02% sodium azide, 37°C) and in vivo (male Sprague-Dawley rats). We found that when the PLGA-COOH chains are sufficiently mobilized, therapeutic peptides not only bind at the surface, a common belief to date, but also can be internalized and distributed throughout the polymer phase at physiological temperature forming a salt with low-molecular weight PLGA-COOH. Importantly, absorption of leuprolide into low MW PLGA-COOH particles yielded ~17 wt.% leuprolide loading in the polymer (i.e., ~70% of PLGA-COOH acids occupied), and the absorbed peptide was released from the polymer for >2 weeks in a controlled fashion in vitro and as indicated by sustained testosterone suppression in male Sprague-Dawley rats. This new approach, which bypasses the traditional encapsulation method and associated production cost, opens up the potential for facile production of low-cost controlled-release injectable depots for leuprolide and related peptides.

Feasibility Investigation of Cellulose Polymers for Mucoadhesive Nasal Drug Delivery Applications.

The feasibility of various cellulose polymer derivatives, including methylcellulose (MC), hydroxypropyl methylcellulose (HPMC), sodium-carboxymethylcellulose (sodium-CMC), and cationic-hydroxyethylcellulose (cationic-HEC), for use as an excipient to enhance drug delivery in nasal spray formulations was investigated. Three main parameters for evaluating the polymers in nasal drug delivery applications include rheology, ciliary beat frequency (CBF), and permeation across nasal tissue. Reversible thermally induced viscosity enhancement was observed at near nasal physiological temperature when cellulose derivatives were combined with an additional excipient, poly(vinyl caprolactam)-poly(vinyl acetate)-poly(ethylene glycol) graft copolymer (PVCL-PVA-PEG). Cationic-HEC was shown to enhance acyclovir permeation across the nasal mucosa. None of the tested cellulosic polymers caused any adverse effects on porcine nasal tissues and cells, as assessed by alterations in CBF. Upon an increase in polymer concentration, a reduction in CBF was observed when ciliated cells were immersed in the polymer solution, and this decrease returned to baseline when the polymer was removed. While each cellulose derivative exhibited unique advantages for nasal drug delivery applications, none stood out on their own to improve more than one of the performance characteristics examined. Hence, these data may be useful for the development of new cellulose derivatives in nasal drug formulations.

Synthetic high-density lipoproteins for delivery of 10-hydroxycamptothecin

The purpose of this study was to develop a novel synthetic high-density lipoprotein (sHDL) nanoparticle delivery system for 10-hydroxycamptothecin (HCPT) for treatment of colon carcinoma. HDL is recognized by scavenger receptor B-I (SR-BI) over-expressed in colon carcinomas 5- to 35-fold relative to the human fibroblasts. The sHDL nanoparticles were composed of apolipoprotein A-I mimic peptide (5A) and contained 0.5%–1.5% (w/w) of HCPT. An optimized HCPT-sHDL formulation exhibited 0.7% HCPT loading with 70% efficiency with an average size of 10–12 nm. Partitioning of HCPT in the sHDL lipid membrane enhanced drug stability in its active lactone form, increased solubilization, and enabled slow release. Cytotoxicity studies in HT29 colon carcinoma cells revealed that the IC50 of HCPT-sHDL was approximately 3-fold lower than that of free HCPT. Pharmacokinetics in rats following intravenous administration showed that the area under the serum concentration-time curve (AUC0−t) and Cmax of HCPT-HDL were 2.7- and 6.5-fold higher relative to the values for the free HCPT, respectively. These results suggest that sHDL-based formulations of hydrophobic drugs are useful for future evaluation in treatment of SR-BI-positive tumors.

Characterizing release mechanisms of leuprolide acetate-loaded PLGA microspheres for IVIVC development I: In vitro evaluation

Release testing of parental controlled release microspheres is an essential step in controlling quality and predicting the duration of efficacy. In the first of a two-part study, we examined the effect of various incubation media on release from leuprolide-loaded PLGA microspheres to understand the influence of external pH, plasticization, and buffer type on mechanism of accelerated release. PLGA 50/50 microspheres encapsulating ~5% w/w leuprolide were prepared by the double emulsion-solvent evaporation method with or without gelatin or by the self-healing encapsulation method. The microspheres were incubated at 37°C up to 56days in various media: pH5.5, 6.5, and 7.4 phosphate buffered-saline (PBS) containing 0.02% Tween 80; pH7.4 PBS containing 1.0% triethyl citrate (PBStc); and pH7.4 HEPES buffered-saline containing 0.02% Tween 80 (all media contained 0.02% sodium azide). The recovered release media and microspheres were examined for released drug, polymer molecular weight (Mw), water uptake, mass loss, and BODIPY (green-fluorescent dye) diffusion coefficient in PLGA. After the initial burst release, release of leuprolide from acid-capped PLGA microspheres appeared to be controlled initially by erosion and then by a second mechanism after day 21, which likely consists of a combination of peptide desorption and/or water-mediated breakage of pore connections. PBStc and acidic buffers accelerated degradation of PLGA and pore-network development and increased BODIPY diffusion coefficient, resulting in faster release. Release of leuprolide from the end-capped PLGA showed similar trends as found with acid capped PLGA but with a longer lag time before release. These data provide a baseline mechanistic signature of in vitro release of leuprolide for future comparison with corresponding in vivo performance, and in turn could lead to future development of rational in vitro-in vivo correlations.

Mechanisms of in vivo release of triamcinolone acetonide from PLGA microspheres

Abstract Little is known about the underlying effects controlling in vitro‐in vivo correlations (IVIVCs) for biodegradable controlled release microspheres. Most reports of IVIVCs that exist are empirical in nature, typically based on a mathematical relationship between in vitro and in vivo drug release, with the latter often estimated by deconvolution of pharmacokinetic data. In order to improve the ability of in vitro release tests to predict microsphere behavior in vivo and develop more meaningful IVIVCs, the in vivo release mechanisms need to be characterized. Here, two poly(lactic‐co‐glycolic acid) (PLGA) microsphere formulations encapsulating the model steroid triamcinolone acetonide (Tr‐A) were implanted subcutaneously in rats by using a validated cage model, allowing for free fluid and cellular exchange and microsphere retrieval during release. Release kinetics, as well as mechanistic indicators of release such as hydrolysis and mass loss, was measured by direct analysis of the recovered microspheres. Release of Tr‐A from both formulations was greatly accelerated in vivo compared to in vitro using agitated phosphate buffered saline + 0.02% Tween 80 pH 7.4, including rate of PLGA hydrolysis, mass loss and water uptake. Both microsphere formulations exhibited erosion‐controlled release in vitro, indicated by similar polymer mass loss kinetics, but only one of the formulations (low molecular weight, free acid terminated) exhibited the same mechanism in vivo. The in vivo release of Tr‐A from microspheres made of a higher molecular weight, ester end‐capped PLGA displayed an osmotically induced/pore diffusion mechanism based on confocal micrographs of percolating pores in the polymer, not previously observed in vitro. This research indicates the need to fully understand the in vivo environment and how it causes drug release from biodegradable microspheres. This understanding can then be applied to develop in vitro release tests which better mimic this environment and cause drug release by the relevant mechanistic processes, ultimately leading to the development of mechanism based IVIVCs.

Influence of route of administration and lipidation of apolipoprotein A-I peptide on pharmacokinetics and cholesterol mobilization

apoA-I, apoA-I mimetic peptides, and their lipid complexes or reconstituted high-density lipoprotein (HDL) have been studied as treatments for various pathologies. However, consensus is lacking about the best method for administration, by intravenous (IV) or intraperitoneal (IP) routes, and formulation, as an HDL particle or in a lipid-free form. The objective of this study was to systematically examine peptide plasma levels, cholesterol mobilization, and lipoprotein remodeling in vivo following administration of lipid-free apoA-I peptide (22A) or phospholipid reconstituted 22A-sHDL by IV and IP routes. The mean circulation half-life was longer for 22A-sHDL (T1/2 = 6.27 h) than for free 22A (T1/2 = 3.81 h). The percentage of 22A absorbed by the vascular compartment after the IP dosing was ∼50% for both 22A and 22A-sHDL. The strongest pharmacologic response came from IV injection of 22A-sHDL, specifically a 5.3-fold transient increase in plasma-free cholesterol (FC) level compared with 1.3- and 1.8-fold FC increases for 22A-IV and 22A-sHDL-IP groups. Addition of either 22A or 22A-sHDL to rat plasma caused lipoprotein remodeling and appearance of a lipid-poor apoA-I. Hence, both the route of administration and the formulation of apoA-I peptide significantly affect its pharmacokinetics and pharmacodynamics.

Effect of Synthetic High Density Lipoproteins Modification with Polyethylene Glycol on Pharmacokinetics and Pharmacodynamics

Synthetic high density lipoprotein nanoparticles (sHDLs) capable of mobilizing excess cholesterol from atherosclerotic arteries and delivering it to the liver for elimination have been shown to reduce plaque burden in patients. Unfortunately, sHDLs have a narrow therapeutic index and relative to the endogenous HDL shorter circulation half-life. Surface modification with polyethylene glycol (PEG) was investigated for its potential to extend sHDL circulation in vivo. Various amounts (2.5, 5, and 10%) and different chain lengths (2 and 5 kDa) of PEG-modified lipids were incorporated in sHDLs lipid membrane. Incorporating PEG did not reduce the ability of sHDL to facilitate cholesterol efflux, nor did it inhibit cholesterol uptake by the liver cells. By either adding more PEG or using PEG of longer chain lengths, the circulation half-life was extended. Addition of PEG also increased the area under the curve for the phospholipid component of sHDL (p < 0.05), but not for the apolipoprotein A-I peptide component of sHDL, suggesting sHDL is remodeled by endogenous lipoproteins in vivo. The extended phospholipid circulation led to a higher mobilization of plasma free cholesterol, a biomarker for facilitation of reverse cholesterol transport. The area under the cholesterol mobilization increased about 2-4-fold (p < 0.05), with greater increases observed for longer PEG chains and higher molar percentages of incorporated PEGylated lipids. Mobilized cholesterol was associated primarily with the HDL fraction, led to a transient increase in VLDL cholesterol, and returned to baseline 24 h postdose. Overall, PEGylation of sHDL led to beneficial changes in sHDL particle pharmacokinetic and pharmacodynamic behaviors.