Kathleen M. Trybus

Three-dimensional image reconstruction of dephosphorylated smooth muscle heavy meromyosin reveals asymmetry in the interaction between myosin heads and placement of subfragment 2

Regulation of the actin-activated ATPase of smooth muscle myosin II is known to involve an interaction between the two heads that is controlled by phosphorylation of the regulatory light chain. However, the three-dimensional structure of this inactivated form has been unknown. We have used a lipid monolayer to obtain two-dimensional crystalline arrays of the unphosphorylated inactive form of smooth muscle heavy meromyosin suitable for structural studies by electron cryomicroscopy of unstained, frozen-hydrated specimens. The three-dimensional structure reveals an asymmetric interaction between the two myosin heads. The ATPase activity of one head is sterically “blocked” because part of its actin-binding interface is positioned onto the converter domain of the second head. ATPase activity of the second head, which can bind actin, appears to be inhibited through stabilization of converter domain movements needed to release phosphate and achieve strong actin binding. When the subfragment 2 domain of heavy meromyosin is oriented as it would be in an actomyosin filament lattice, the position of the heads is very different from that needed to bind actin, suggesting an additional contribution to ATPase inhibition in situ.

Myosin V: regulation by calcium, calmodulin, and the tail domain

Calcium activates the ATPase activity of tissue-purified myosin V, but not that of shorter expressed constructs. Here, we resolve this discrepancy by comparing an expressed full-length myosin V (dFull) to three shorter constructs. Only dFull has low ATPase activity in EGTA, and significantly higher activity in calcium. Based on hydrodynamic data and electron microscopic images, the inhibited state is due to a compact conformation that is possible only with the whole molecule. The paradoxical finding that dFull moved actin in EGTA suggests that binding of the molecule to the substratum turns it on, perhaps mimicking cargo activation. Calcium slows, but does not stop the rate of actin movement if excess calmodulin (CaM) is present. Without excess CaM, calcium binding to the high affinity sites dissociates CaM and stops motility. We propose that a folded-to-extended conformational change that is controlled by calcium and CaM, and probably by cargo binding itself, regulates myosin Vs ability to transport cargo in the cell.

Three-dimensional structure of the myosin V inhibited state by cryoelectron tomography

Unconventional myosin V (myoV) is an actin-based molecular motor that has a key function in organelle and mRNA transport, as well as in membrane trafficking. MyoV was the first member of the myosin superfamily shown to be processive, meaning that a single motor protein can ‘walk’ hand-over-hand along an actin filament for many steps before detaching. Full-length myoV has a low actin-activated MgATPase activity at low [Ca2+], whereas expressed constructs lacking the cargo-binding domain have a high activity regardless of [Ca2+] (refs 5–7). Hydrodynamic data and electron micrographs indicate that the active state is extended, whereas the inactive state is compact. Here we show the first three-dimensional structure of the myoV inactive state. Each myoV molecule consists of two heads that contain an amino-terminal motor domain followed by a lever arm that binds six calmodulins. The heads are followed by a coiled-coil dimerization domain (S2) and a carboxy-terminal globular cargo-binding domain. In the inactive structure, bending of myoV at the head–S2 junction places the cargo-binding domain near the motor domains ATP-binding pocket, indicating that ATPase inhibition might occur through decreased rates of nucleotide exchange. The actin-binding interfaces are unobstructed, and the lever arm is oriented in a position typical of strong actin-binding states. This structure indicates that motor recycling after cargo delivery might occur through transport on actively treadmilling actin filaments rather than by diffusion.

Evidence for cleft closure in actomyosin upon ADP release

Structural insights into the interaction of smooth muscle myosin with actin have been provided by computer-based fitting of crystal structures into three-dimensional reconstructions obtained by electron cryomicroscopy, and by mapping of structural and dynamic changes in the actomyosin complex. The actomyosin structures determined in the presence and absence of MgADP differ significantly from each other, and from all crystallographic structures of unbound myosin. Coupled to a complex movement (∼34 Å) of the light chain binding domain upon MgADP release, we observed a ∼9° rotation of the myosin motor domain relative to the actin filament, and a closure of the cleft that divides the actin binding region of the myosin head. Cleft closure is achieved by a movement of the upper 50 kDa region, while parts of the lower 50 kDa region are stabilized through strong interactions with actin. This model supports a mechanism in which binding of MgATP at the active site opens the cleft and disrupts the interface, thereby releasing myosin from actin.

An insert in the motor domain determines the functional properties of expressed smooth muscle myosin isoforms

Smooth muscle myosin isoforms of the heavy chain and the essential light chain have been hypothesized to contribute to the different shortening velocities of phasic and tonic smooth muscles, and to their different affinities for MgADP. We used the baculovirus/insect cell system to express homogeneous heavy meromyosin molecules differing onlyin a seven amino acid insert (QGPSFSY) in the motor domain near the active site, or in the type of essential light chain isoform. Myosin from tonic rabbit uterine smooth muscle lacks the heavy chain insert, while myosin from phasic chicken gizzard contains it. The properties of a mutant uterine heavy meromyosin with added insert, and a mutant gizzard heavy meromyosin with the insert deleted, were compared with their wild type progenitors. Phosphorylated heavy meromyosins with the insert have a twofold higher enzymatic activity and in vitro motility than heavy meromyosins without the insert. These functional properties were not altered by the essential light chain isoforms. The altered motility caused by the insert implies that it modulates the rate of ADP release, the molecular step believed to limit shortening velocity. The insert may thus account in part for both the lower sensitivity to MgADP and the higher shortening velocity of phasic compared to tonic smooth muscles

A 7-amino-acid insert in the heavy chain nucleotide binding loop alters the kinetics of smooth muscle myosin in the laser trap.

Two smooth muscle myosin heavy chain isoforms differ by a 7-amino- acid insert in a flexible surface loop located near the nucleotide binding site. The non-inserted isoform is predominantly found in tonic muscle, while the inserted isoform is mainly found in phasic muscle. The inserted isoform has twice the actin-activated ATPase activity and actin filament velocity in the in vitro motility assay as the non-inserted isoform. We used the laser trap to characterize the molecular mechanics and kinetics of the inserted isoform ((+)insert) and of a mutant lacking the insert ((−)insert), analogous to the isoform found in tonic muscle. The constructs were expressed as heavy meromyosin using the baculovirus/insect cell system. Unitary displacement (d) was similar for both constructs (∼10nm) but the attachment time (ton for the (−)insert was twice as long as for the (+)insert regardless of the [MgATP]. Both the relative average isometric force (Favg(−insert)/Favg(+insert))=1.1±0.2 (mean±se) using the in vitro motility mixture assay, and the unitary force (F∼1pN) using the laser trap, showed no difference between the two constructs. However, as under unloaded conditions, ton under loaded conditions was longer for the (−)insert compared with the (+)insert construct at limiting [MgATP]. These data suggest that the insert in this surface loop does not affect the mechanics but rather the kinetics of the cross-bridge cycle. Through comparisons of ton from d measurements at various [MgATP], we conclude that the insert affects two specific steps in the cross-bridge cycle, that is, MgADP release and MgATP binding.

Myosin Va maneuvers through actin intersections and diffuses along microtubules

Certain types of intracellular organelle transport to the cell periphery are thought to involve long-range movement on microtubules by kinesin with subsequent handoff to vertebrate myosin Va (myoVa) for local delivery on actin tracks. This process may involve direct interactions between these two processive motors. Here we demonstrate using single molecule in vitro techniques that myoVa is flexible enough to effectively maneuver its way through actin filament intersections and Arp2/3 branches. In addition, myoVa surprisingly undergoes a one-dimensional diffusive search along microtubules, which may allow it to scan efficiently for kinesin and/or its cargo. These features of myoVa may help ensure efficient cargo delivery from the cell center to the periphery.

Myosin V from head to tail

Abstract.Myosin V (myoV), a processive cargo transporter, has arguably been the most well-studied unconventional myosin of the past decade. Considerable structural information is available for the motor domain, the IQ motifs with bound calmodulin or light chains, and the cargo-binding globular tail, all of which have been crystallized. The repertoire of adapter proteins that link myoV to a particular cargo is becoming better understood, enabling cellular transport processes to be dissected. MyoV is processive, meaning that it takes many steps on actin filaments without dissociating. Its extended lever arm results in long 36-nm steps, making it ideal for single molecule studies of processive movement. In addition, electron microscopy revealed the structure of the inactive, folded conformation of myoV when it is not transporting cargo. This review provides a background on myoV, and highlights recent discoveries that show why myoV will continue to be an active focus of investigation.

Myosin V and Kinesin act as tethers to enhance each others' processivity

Organelle transport to the periphery of the cell involves coordinated transport between the processive motors kinesin and myosin V. Long-range transport takes place on microtubule tracks, whereas final delivery involves shorter actin-based movements. The concept that motors only function on their appropriate track required further investigation with the recent observation that myosin V undergoes a diffusional search on microtubules. Here we show, using single-molecule techniques, that a functional consequence of myosin Vs diffusion on microtubules is a significant enhancement of the processive run length of kinesin when both motors are present on the same cargo. The degree of run length enhancement correlated with the net positive charge in loop 2 of myosin V. On actin, myosin V also undergoes longer processive runs when kinesin is present on the same cargo. The process that causes run length enhancement on both cytoskeletal tracks is electrostatic. We propose that one motor acts as a tether for the other and prevents its diffusion away from the track, thus allowing more steps to be taken before dissociation. The resulting run length enhancement likely contributes to the successful delivery of cargo in the cell.

Kinetic Characterization of a Monomeric Unconventional Myosin V Construct

An expressed, monomeric murine myosin V construct composed of the motor domain and two calmodulin-binding IQ motifs (MD(2IQ)) was used to assess the regulatory and kinetic properties of this unconventional myosin. In EGTA, the actin-activated ATPase activity of MD(2IQ) was 7.4 ± 1.6 s−1 with aK app of ∼1 μm (37 °C), and the velocity of actin movement was ∼0.3 μm/s (30 °C). Calcium inhibited both of these activities, but the addition of calmodulin restored the values to ∼70% of control, indicating that calmodulin dissociation caused inhibition. In contrast to myosin II, MD(2IQ) is highly associated with actin at physiological ionic strength in the presence of ATP, but the motor is in a weakly bound conformation based on the pyrene-actin signal. The rate of dissociation of acto-MD(2IQ) by ATP is fast (>850 s−1), and ATP hydrolysis occurs at ∼200 s−1. The affinity of acto-MD(2IQ) for ADP is somewhat higher than that of smooth S1, and ADP dissociates more slowly. Actin does not cause a large increase in the rate of ADP release, nor does the presence of ADP appreciably alter the affinity of MD(2IQ) for actin. These kinetic data suggest that monomeric myosin V is not processive.