Kaumeel Chokshi

Nitrogen stress triggered biochemical and morphological changes in the microalgae Scenedesmus sp. CCNM 1077.

The aim of present study was to investigate the effects of nitrogen limitation as well as sequential nitrogen starvation on morphological and biochemical changes in Scenedesmus sp. CCNM 1077. The results revealed that the nitrogen limitation and sequential nitrogen starvation conditions significantly decreases the photosynthetic activity as well as crude protein content in the organism, while dry cell weight and biomass productivity are largely unaffected up to nitrate concentration of about 30.87mg/L and 3 days nitrate limitation condition. Nitrate stress was found to have a significant effect on cell morphology of Scenedesmus sp. CCNM 1077. Total removal of nitrate from the growth medium resulted in highest lipid (27.93%) and carbohydrate content (45.74%), making it a potential feed stock for biodiesel and bio-ethanol production. This is a unique approach to understand morphological and biochemical changes in freshwater microalgae under nitrate limitation as well as sequential nitrate removal conditions.

Salinity induced oxidative stress enhanced biofuel production potential of microalgae Scenedesmus sp. CCNM 1077.

Microalgal biomass is considered as potential feedstock for biofuel production. Enhancement of biomass, lipid and carbohydrate contents in microalgae is important for the commercialization of microalgal biofuels. In the present study, salinity stress induced physiological and biochemical changes in microalgae Scenedesmus sp. CCNM 1077 were studied. During single stage cultivation, 33.13% lipid and 35.91% carbohydrate content was found in 400 mM NaCl grown culture. During two stage cultivation, salinity stress of 400 mM for 3 days resulted in 24.77% lipid (containing 74.87% neutral lipid) along with higher biomass compared to single stage, making it an efficient strategy to enhance biofuel production potential of Scenedesmus sp. CCNM 1077. Apart from biochemical content, stress biomarkers like hydrogen peroxide, lipid peroxidation, ascorbate peroxidase, proline and mineral contents were also studied to understand the role of reactive oxygen species (ROS) mediated lipid accumulation in microalgae Scenedesmus sp. CCNM 1077.

Effects of different media composition, light intensity and photoperiod on morphology and physiology of freshwater microalgae Ankistrodesmus falcatus – A potential strain for bio-fuel production

Media composition, light intensity and photoperiod significantly affect the algal growth and productivity and their optimization is important for the commercialization of microalgae based biofuels. In the present study, effects of different culture medium, light intensity and photoperiod were studied on growth, biomass productivity, and biochemical composition of a fresh water microalgae Ankistrodesmus falcatus in batch culture. The results revealed that A. falcatus could yield more than 35% of total lipid (containing around 65.74% neutral lipid) along with optimal growth (0.20 μ) and biomass productivity (7.9 mg/L/day) in the BG-11 medium under a light intensity of 60 μmol m(-2) s(-1) and 12:12 (Light: Dark) cycle. The highest total lipid yield of 67.2% (containing 72.68% of neutral lipid) was observed in Zarrouks medium grown culture but with altered cell morphology and ultra-structural changes.

Biofuel potential of the newly isolated microalgae Acutodesmus dimorphus under temperature induced oxidative stress conditions.

Lack of control over temperature is one of the major issues in large scale cultivation of microalgae. Therefore, it is important to evaluate the effects of cultivation temperature on the growth and physiology of microalgae. In the present study, freshwater microalgae Acutodesmus dimorphus was grown at different temperature in continuous and two stage cultivation. Results revealed that during continuous cultivation A. dimorphus grows better at 35°C than at 25°C and 38°C. At 35°C, A. dimorphus produced 22.7% lipid (containing 59% neutral lipid) and 33.7% carbohydrate along with 68% increase in biomass productivity (23.53mg/L/day) compared to 25°C grown culture. Stress biomarkers like reactive oxygen species, antioxidant enzymes like catalase and ascorbate peroxidase and lipid peroxidation were also lowest in 35°C grown culture which reveals that A. dimorphus is well acclimatized at 35°C.

Bicarbonate supplementation enhanced biofuel production potential as well as nutritional stress mitigation in the microalgae Scenedesmus sp. CCNM 1077

The aim of the present study was to find out the optimum sodium bicarbonate concentration to produce higher biomass with higher lipid and carbohydrate contents in microalgae Scenedesmus sp. CCNM 1077. The role of bicarbonate supplementation under different nutritional starvation conditions was also evaluated. The results clearly indicate that 0.6 g/L sodium bicarbonate was optimum concentration resulting in 20.91% total lipid and 25.56% carbohydrate along with 23% increase in biomass production compared to normal growth condition. Addition of sodium bicarbonate increased the activity of nutrient assimilatory enzymes, biomass, lipid and carbohydrate contents under different nutritional starvation conditions. Nitrogen starvation with bicarbonate supplementation resulted in 54.03% carbohydrate and 34.44% total lipid content in microalgae Scenedesmus sp. CCNM 1077. These findings show application of bicarbonate grown microalgae Scenedesmus sp. CCNM 1077 as a promising feedstock for biodiesel and bioethanol production.

Biosorption of Methylene Blue by De-Oiled Algal Biomass: Equilibrium, Kinetics and Artificial Neural Network Modelling

The main objective of the present study is to effectively utilize the de-oiled algal biomass (DAB) to minimize the waste streams from algal biofuel by using it as an adsorbent. Methylene blue (MB) was used as a sorbate for evaluating the potential of DAB as a biosorbent. The DAB was characterized by SEM, FTIR, pHPZC, particle size, pore volume and pore diameter to understand the biosorption mechanism. The equilibrium studies were carried out by variation in different parameters, i.e., pH (2–9), temperature (293.16–323.16 K), biosorbent dosage (1–10 g L−1), contact time (0–1,440 min), agitation speed (0–150 rpm) and dye concentration (25–2,500 mg L−1). MB removal was greater than 90% in both acidic and basic pH. The optimum result of MB removal was found at 5–7 g L−1 DAB concentration. DAB removes 86% dye in 5 minutes under static conditions and nearly 100% in 24 hours when agitated at 150 rpm. The highest adsorption capacity was found 139.11 mg g−1 at 2,000 mg L−1 initial MB concentration. The process attained equilibrium in 24 hours. It is an endothermic process whose spontaneity increases with temperature. MB biosorption by DAB follows pseudo-second order kinetics. Artificial neural network (ANN) model also validates the experimental dye removal efficiency (R2 = 0.97) corresponding with theoretically predicted values. Sensitivity analysis suggests that temperature and agitation speed affect the process most with 23.62% and 21.08% influence on MB biosorption, respectively. Dye adsorption capacity of DAB in fixed bed column was 107.57 mg g−1 in preliminary study while it went up to 139.11 mg g−1 in batch studies. The probable mechanism for biosorption in this study is chemisorptions via surface active charges in the initial phase followed by physical sorption by occupying pores of DAB.

Enhanced biofuel production potential with nutritional stress amelioration through optimization of carbon source and light intensity in Scenedesmus sp. CCNM 1077

Microalgal mixotrophic cultivation is one of the most potential ways to enhance biomass and biofuel production. In the present study, first of all ability of microalgae Scenedesmus sp. CCNM 1077 to utilize various carbon sources under mixotrophic growth condition was evaluated followed by optimization of glucose concentration and light intensity to obtain higher biomass, lipid and carbohydrate contents. Under optimized condition i.e. 4 g/L glucose and 150 μmol m(-2) s(-1) light intensity, Scenedesmus sp. CCNM 1077 produced 1.2g/L dry cell weight containing 23.62% total lipid and 42.68% carbohydrate. Addition of glucose shown nutritional stress ameliorating effects and around 70% carbohydrate and 25% total lipid content was found with only 21% reduction in dry cell weight under nitrogen starved condition. This study shows potential application of mixotrophically grown Scenedesmus sp. CCNM 1077 for bioethanol and biodiesel production feed stock.

Applications of de-oiled microalgal biomass towards development of sustainable biorefinery.

In view of commercialization of microalgal biofuel, the de-oiled microalgal biomass (DMB) is a surplus by-product in the biorefinery process that needs to be exploited to make the process economically attractive and feasible. This DMB, rich in carbohydrates, proteins, and minerals, can be used as feed, fertilizer, and substrate for the production of bioethanol/bio-methane. Further, thermo-chemical conversion of DMB results into fuels and industrially important chemicals. Future prospects of DMB also lie with its conversion into novel biomaterials like nanoparticles and carbon-dot which have biomedical importance. The lowest valued application of DMB is to use it for adsorption of dyes and heavy metals from industrial effluents. This study reviews how DMB can be utilized for different applications and in the generation of valuable co-products. The value addition of DMB would thereby improve the overall cost economics of the microalgal bio-refinery.

Selective carotenoid accumulation by varying nutrient media and salinity in Synechocystis sp. CCNM 2501

Nutrients are the deciding factors in the biological production of bioactive compounds. Various growth media like BG11, Zarrouks and Chus 10 were studied for carotenoid production in Synechocystis sp. CCNM 2501. Maximum carotenoid content (dry weight basis) was found in Zarrouks medium (ZM, 7.99mgg(-1)) followed by BG11 (5.13mgg(-1)). Echinenone content was 4 times higher in ZM (3.81mgg(-1)) as compared to BG11 (0.95mgg(-1)) and Chus 10 (0.77mgg(-1)). Being an economical medium, BG11 was selected for carotenoid production. Further, increase in salinity from 0 to 0.2M in BG11 medium increases total carotenoid content from 5.82 to 7.05mgg(-1) and later it declines to 6.23mgg(-1) (1M). 3 times more β-carotene is produced at 1M salinity as compared to control BG11. The variation in carotenoid composition with change in nutrients/salinity can be a good strategy to enhance certain targeted carotenoids.

Green synthesis, characterization and antioxidant potential of silver nanoparticles biosynthesized from de-oiled biomass of thermotolerant oleaginous microalgae Acutodesmus dimorphus

Metal nanoparticles have received global attention due to their widespread biomedical applications. This study demonstrates a sustainable approach for the biogenic synthesis of silver nanoparticles using lipid extracted residual biomass of microalgae Acutodesmus dimorphus cultivated in dairy wastewater. A. dimorphus is a thermotolerant green microalgae with biofuel production potential. The residual biomass of A. dimorphus left after lipid extraction was used to prepare microalgal water extract which was further used for the synthesis of silver nanoparticles. Characterization of the biosynthesized silver nanoparticles using ultraviolet-visible spectrophotometry, Fourier transform infrared spectroscopy, atomic force microscopy, scanning electron microscopy, transmission electron microscopy and energy-dispersive X-ray spectroscopy confirmed the formation of polydispersed, spherical shaped silver nanoparticles with 2–20 nm size. To our best knowledge, this is the first report on the biosynthesis of nanoparticles using de-oiled biomass of microalgae. Further, the biosynthesized silver nanoparticles exhibited an antioxidant potential which was evaluated using 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) i.e. ABTS and 1,1-diphenyl-2-picrylhydrazyl i.e. DPPH, free radical scavenging assays. As microalgae are widely distributed in diverse habitats, they exhibit wide potential for the green synthesis of metallic nanoparticles. Such integration of phycology and nanotechnology leads to the development of a new interdisciplinary approach, ‘phyconanotechnology’.