Kazuo Sakka

Characterization of the Cellulolytic Complex (Cellulosome) from Ruminococcus albus

The cellulolytic complex was isolated from the culture supernatant of Ruminococcus albus strain F-40 grown on cellulose by a Sephacryl S-300HR column chromatography. The molecular mass of the cellulolytic complex was found to be larger than 1.5×106 Da. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis indicated that the cellulolytic complex contained at least 15 proteins with molecular weights from 40 kDa to 250 kDa. Among them, 11 proteins showed endoglucanase and/or xylanase activities on the zymograms. Immunological analysis using an antiserum raised against the dockerin domain of endoglucanase VII of R. albus (DocVII) suggested that at least 7 proteins in the cellulolytic complex contained a dockerin domain immunoreactive with the anti-DocVII antiserum. Furthermore, DocVII was shown to specifically interact with a 40-kDa protein of the cellulolytic complex by Far-Western blot analysis. These results strongly suggest that the cellulolytic complex produced by R. albus resembles the cellulosome specified for the cellulolytic complex of several clostridia such as Clostridium thermocellum and respective components are assembled into the cellulosome by the mechanism common in all of the cellulolytic clostridia, i.e., the cellulosome is formed by the interaction between a dockerin domain of catalytic components and a cohesin domain of a scaffolding protein.

Identification and characterization of Clostridium paraputrificum M-21, a chitinolytic, mesophilic and hydrogen-producing bacterium

A strictly anaerobic, mesophilic and chitinolytic bacterial strain, M-21, was isolated from a soil sample collected from Mie University campus and identified as Clostridium paraputrificum based on morphological and physiological characteristics, and 16S rRNA sequence analysis. C. paraputrificum M-21 utilized chitin and N-acetyl-D-glucosamine (GlcNAc), a constituent monosaccharide of chitin, to produce a large amount of gas along with acetic acid and propionic acid as major fermentation products. Hydrogen and carbon dioxide accounted for 65% and 35% of the gas evolved, respectively. The conditions for 1 l batch culture of C. paraputrificum, including pH of the medium, incubation temperature and agitation speed, were optimized for hydrogen production with GlcNAc as the carbon source. The bacterium grew rapidly on GlcNAc with a doubling time of around 30 min, and produced hydrogen gas with a yield of 1.9 mol H2/mol GlcNAc under the following cultivation conditions: initial medium pH of 6.5, incubation temperature of 45 degrees C, agitation speed of 250 rpm, and working volume of 50% of the fermentor. The dry cell weight harvested from this culture was 2.0 g/l.

Characterization of a Cellulase Containing a Family 30 Carbohydrate-Binding Module (CBM) Derived from Clostridium thermocellum CelJ: Importance of the CBM to Cellulose Hydrolysis

Clostridium thermocellum CelJ is a modular enzyme containing a family 30 carbohydrate-binding module (CBM) and a family 9 catalytic module at its N-terminal moiety. To investigate the functions of the CBM and the catalytic module, truncated derivatives of CelJ were constructed and characterized. Isothermal titration calorimetric studies showed that the association constants (K(a)) of the CBM polypeptide (CBM30) for the binding of cellopentaose and cellohexaose were 1.2 x 10(4) and 6.4 x 10(4) M(-1), respectively, and that the binding of CBM30 to these ligands is enthalpically driven. Qualitative analyses showed that CBM30 had strong affinity for cellulose and beta-1,3-1,4-mixed glucan such as barley beta-glucan and lichenan. Analyses of the hydrolytic action of the enzyme comprising the CBM and the catalytic module showed that the enzyme is a processive endoglucanse with strong activity towards carboxymethylcellulose, barley beta-glucan and lichenan. By contrast, the catalytic module polypeptide devoid of the CBM showed negligible activity toward these substrates. These observations suggest that the CBM is extremely important not only because it mediates the binding of the enzyme to the substrates but also because it participates in the catalytic function of the enzyme or contributes to maintaining the correct tertiary structure of the family 9 catalytic module for expressing enzyme activity.

Purification, characterization, and molecular cloning of acidophilic xylanase from Penicillium sp.40.

Penicillum sp. 40, which can grow in an extremely acidic medium at pH 2.0 was screened from an acidic soil. This fungus produces xylanases when grown in a medium containing xylan as a sole carbon source. A major xylanase was purified from the culture supernatant of Penicillium sp. 40 and designated XynA. The molecular mass of XynA was estimated to be 25,000 by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. XynA has an optimum pH at 2.0 and is stable in pH 2.0-5.0. Western blot analysis using anit-XynA antibody showed that XynA was induced by xylan and repressed by glucose. Also, its production was increased by an acidic medium. The gene encoding XynA (xynA) was isolated from the genomic library of Penicillium sp. 40. The structural part of xynA was found to be 721 bp. The nucleotide sequence of cDNA amplified by RT-PCR showed that the open reading frame of xynA was interrupted by a single intron which was 58 bp in size and encoded 221 amino acids. Direct N-terminal amino acid sequencing showed that the precursor of XynA had a signal peptide composed of 31 amino acids. The molecular mass caliculated from the deduced amino acid sequence of XynA is 20,713. This is lower than that estimated by gel electrophoresis, suggesting that XynA is a glycoprotein. The predicted amino acid sequence of XynA has strong similarity to other family11 xylanases from fungi.

Nucleotide sequences of two contiguous and highly homologous xylanase genes xynA and xynB and characterization of XynA from Clostridium thermocellum.

Abstract A 5.7-kbp region of the Clostridium thermocellum F1 DNA was sequenced and found to contain two contiguous and highly homologous xylanase genes, xynA and xynB. The xynA gene encoding the xylanase XynA consists of 2049 bp and encodes a protein of 683 amino acids with a molecular mass of 74 511 Da, and the xynB gene encoding the xylanase XynB consists of 1371 bp and encodes a protein of 457 amino acids with a molecular mass of 49 883 Da. XynA is a modular enzyme composed of a typical N-terminal signal peptide and four domains in the following order: a family-11 xylanase domain, a family-VI cellulose-binding domain, a dockerin domain, and a NodB domain. XynB exhibited extremely high overall sequence homology with XynA (identity 96.9%), while lacking the NodB domain present in the latter. These facts suggested that the xynA and xynB genes originated from a common ancestral gene through gene duplication. XynA was purified from a recombinant Escherichia coli strain and characterized. The purified enzyme was highly active toward xylan; the specific activity on oat-spelt xylan was 689 units/mg protein. Immunological and zymogram analyses suggested that XynA and XynB are components of the C. thermocellum F1 cellulosome.

Nucleotide Sequence of the Clostridium stercorarium xylA Gene Encoding a Bifunctional Protein with β-D-Xylosidase and α-L-Arabinofuranosidase Activities, and Properties of the Translated Product

The nucleotides of the β-xylosidase (xylA) gene from Clostridium stercorarium were sequenced. A single open reading frame of 473 codons specifying the subunit (MW 53,340) of xylosidase was identified. The N-terminal amino acid sequence and molecular weight estimated by SDS-polyacrylamide gel electrophoresis of the purified enzyme were quite in agreement with those deduced from the nucleotide sequence. Analysis of the enzyme by gel filtration on an HPLC column gave a molecular weight of 220,000, suggesting that the native enzyme is a tetramer composed of 4 identical subunits. The pH optimum was 7.0 and quite stable over the pH range of 5 to 10 at 4°C. The optimum temperature was 65°C. Vm was estimated to be 5.9nmol/min/μg for p-nitrophenyl-β-D-xylopyranoside and 16.7nmol/min/μg for p-nitrophenyl-α-L-arabinofuranoside, while Km was estimated to be 2.5 mM for p-nitrophenyl-β-D-xylopyranoside and 17.6 mM for p-nitrophenyl-α-L-arabinofuranoside.

Fusion of family VI cellulose binding domains to Bacillus halodurans xylanase increases its catalytic activity and substrate-binding capacity to insoluble xylan

A tandem repeat of the family VI cellulose binding domain (CBD) from Clostridium stercorarium xylanase (XylA) was fused at the carboxyl-terminus of Bacillus halodurans xylanase (XylA). B. halodurans XylA is an enzyme which is active in the alkaline region of pH and lacks a CBD. The constructed chimera was expressed in Escherichia coli, purified to homogeneity, and then subjected to detailed characterization. The chimeric enzyme displayed pH activity and stability profiles similar to those of the parental enzyme. The optimal temperature of the chimera was observed at 60 °C and the enzyme was stable up to 50 °C. Binding studies with insoluble polysaccharides indicated that the chimera had acquired an increased affinity for oat spelt xylan and acid-swollen cellulose. The bound chimeric enzyme was desorbed from insoluble substrates with sugars and soluble polysaccharides, indicating that the CBDs also possess an affinity for soluble sugars. Overall, the chimera displayed a higher level of hydrolytic activity toward insoluble oat spelt xylan than its parental enzyme and a similar level of activity toward soluble xylan.

Adsorption of Clostridium stercorarium Xylanase A to Insoluble Xylan and the Importance of the CBDs to Xylan Hydrolysis

Abstract Xylanase A (XynA) from Clostridium stercorarium , which consists of a catalytic domain and two family VI cellulose-binding domains (CBDs) each connected by a linker sequence, was found to bind to insoluble oat-spelt xylan as well as acid-swollen cellulose (ASC). Its adsorption to xylan was greatly dependent on the concentration of the phosphate buffer in the binding assay mixtures. The adsorption of XynA to insoluble xylan proceeded in accordance with a Langmuir-type isotherm. The Ka and [PX] max values of XynA for oat-spelt were 0.17 l /μmol and 5.0 μmol/g, respectively. Removal of the CBDs from XynA abolished the cellulose- and xylan-binding abilities of this enzyme and reduced the enzyme activity toward insoluble xylan but not soluble xylan. These results clearly indicated that the CBDs of XynA play an important role in the hydrolysis of insoluble xylan. Desorption of XynA from the ASC-XynA complex was effected by soluble saccharide solutions such as barley β-glucan, birchwood xylan, and glucose solutions as well as a cellobiose solution, indicating that the CBDs of XynA have an affinity for soluble saccharides in addition to insoluble polysaccharides.

Isolation and characterization of a multienzyme complex (cellulosome) of the Paenibacillus curdlanolyticus B-6 grown on Avicel under aerobic conditions

A multienzyme complex, cellulosome, of the facultatively anaerobic bacterium, Paenibacillus curdlanolyticus B-6 was produced on microcrystalline cellulose (Avicel) under aerobic conditions. During growth on Avicel, the bacterial cells were found to be capable of adhesion to Avicel by scanning electron microscopic (SEM) analysis. The multienzyme complex of P. curdlanolyticus B-6 was isolated from the crude enzyme preparation by gel filtration chromatography on Sephacryl S-300 and affinity purification on cellulose. The isolated multienzyme complex was able to bind to both Avicel and insoluble xylan and consists of cellulolytic and xylanolytic enzymes such as avicelase, carboxymethyl cellulase (CMCase), cellobiohydrolase, beta-glucosidase, xylanase, beta-xylosidase and alpha-l-arabinofuranosidase. The molecular mass of the complex was estimated to be 1600 kDa. It composed of at least 12 proteins on SDS-PAGE and 10 CMCases and 11 xylanases on zymograms. The isolated multienzyme complex could degrade the raw lignocellulosic substances effectively.

Crystal Structure of Cel44A, a Glycoside Hydrolase Family 44 Endoglucanase from Clostridium thermocellum

The crystal structure of Cel44A, which is one of the enzymatic components of the cellulosome of Clostridium thermocellum, was solved at a resolution of 0.96Å. This enzyme belongs to glycoside hydrolase family (GH family) 44. The structure reveals that Cel44A consists of a TIM-like barrel domain and a β-sandwich domain. The wild-type and the E186Q mutant structures complexed with substrates suggest that two glutamic acid residues, Glu186 and Glu359, are the active residues of the enzyme. Biochemical experiments were performed to confirm this idea. The structural features indicate that GH family 44 belongs to clan GH-A and that the reaction catalyzed by Cel44A is retaining type hydrolysis. The stereochemical course of hydrolysis was confirmed by a 1H NMR experiment using the reduced cellooligosaccharide as a substrate.