Kelly J. Beumer

Efficient Gene Targeting in Drosophila With Zinc-Finger Nucleases

This report describes high-frequency germline gene targeting at two genomic loci in Drosophila melanogaster, y and ry. In the best case, nearly all induced parents produced mutant progeny; 25% of their offspring were new mutants and most of these were targeted gene replacements resulting from homologous recombination (HR) with a marked donor DNA. The procedure that generates these high frequencies relies on cleavage of the target by designed zinc-finger nucleases (ZFNs) and production of a linear donor in situ. Increased induction of ZFN expression led to higher frequencies of gene targeting, demonstrating the beneficial effect of activating the target. In the absence of a homologous donor DNA, ZFN cleavage led to the recovery of new mutants at three loci—y, ry and bw—through nonhomologous end joining (NHEJ) after cleavage. Because zinc fingers can be directed to a broad range of DNA sequences and targeting is very efficient, this approach promises to allow genetic manipulation of many different genes, even in cases where the mutant phenotype cannot be predicted.

Efficient gene targeting in Drosophila by direct embryo injection with zinc-finger nucleases.

We report very high gene targeting frequencies in Drosophila by direct embryo injection of mRNAs encoding specific zinc-finger nucleases (ZFNs). Both local mutagenesis via nonhomologous end joining (NHEJ) and targeted gene replacement via homologous recombination (HR) have been achieved in up to 10% of all targets at a given locus. In embryos that are wild type for DNA repair, the products are dominated by NHEJ mutations. In recipients deficient in the NHEJ component, DNA ligase IV, the majority of products arise by HR with a coinjected donor DNA, with no loss of overall efficiency in target modification. We describe the application of the ZFN injection procedure to mutagenesis by NHEJ of 2 new genes in Drosophila melanogaster: coil and pask. Pairs of novel ZFNs designed for targets within those genes led to the production of null mutations at each locus. The injection procedure is much more rapid than earlier approaches and makes possible the generation and recovery of targeted gene alterations at essentially any locus within 2 fly generations.

Design, construction and in vitro testing of zinc finger nucleases

Zinc finger nucleases (ZFNs) are hybrid proteins that have been developed as targetable cleavage reagents for double-stranded DNA, both in vitro and in vivo. This protocol describes the design and construction of new DNA-binding domains comprised of zinc fingers (ZFs) directed at selected DNA sequences. Because the ZFNs must dimerize to cut DNA, they are designed in pairs for any new site. The first step is choosing a DNA segment of interest and searching it for sequences that can be recognized by combinations of existing ZFs. The second step is the construction of coding sequences for the selected ZF sets. Third, these coding sequences are linked to that of the nonspecific cleavage domain from the FokI restriction endonuclease in a cloning vector of choice. Finally, the ZFNs are expressed in Escherichia coli, partially purified, and tested in vitro for cleavage of the target sequences to which they were designed. If all goes smoothly, design, construction and cloning can be completed in about two weeks, with expression and testing completed in one additional week.

Targeted mutagenesis in the silkworm Bombyx mori using zinc finger nuclease mRNA injection

Targeted mutagenesis is one of the key methods for functional gene analysis. A simplified variant of gene targeting uses direct microinjection of custom-designed Zinc Finger Nuclease (ZFN) mRNAs into Drosophila embryos. To evaluate the applicability of this method to gene targeting in another insect, we mutagenized the Bombyx mori epidermal color marker gene BmBLOS2, which controls the formation of uric acid granules in the larval epidermis. Our results revealed that ZFN mRNA injection is effective to induce somatic, as well as germline, mutations in a targeted gene by non-homologous end joining (NHEJ). The ZFN-induced NHEJ mutations lack end-filling and blunt ligation products, and include mainly 7 bp or longer deletions, as well as single nucleotide insertions. These observations suggest that the B. mori double-strand break repair system relies on microhomologies rather than on a canonical ligase IV-dependent mechanism. The frequency of germline mutants in G(1) was sufficient to be used for gene targeting relying on a screen based solely on molecular methods.

Coilin Is Essential for Cajal Body Organization in Drosophila melanogaster

Cajal bodies (CBs) are nuclear organelles that occur in a variety of organisms, including vertebrates, insects, and plants. They are most often identified with antibodies against the marker protein coilin. Because the amino acid sequence of coilin is not strongly conserved evolutionarily, coilin orthologues have been difficult to recognize by homology search. Here, we report the identification of Drosophila melanogaster coilin and describe its distribution in tissues of the fly. Surprisingly, we found coilin not only in CBs but also in histone locus bodies (HLBs), calling into question the use of coilin as an exclusive marker for CBs. We analyzed two null mutants in the coilin gene and a piggyBac insertion mutant, which leads to specific loss of coilin from the germline. All three mutants are homozygous viable and fertile. Cells that lack coilin also lack distinct foci of other CB markers, including fibrillarin, the survival motor neuron (SMN) protein, U2 small nuclear RNA (snRNA), U5 snRNA, and the small CB-specific (sca) RNA U85. However, HLBs are not obviously affected in coilin-null flies. Thus, coilin is required for normal CB organization in Drosophila but is not essential for viability or production of functional gametes.

Genetic Analysis of Zinc-finger Nuclease-induced Gene Targeting in Drosophila

Using zinc-finger nucleases (ZFNs) to cleave the chromosomal target, we have achieved high frequencies of gene targeting in the Drosophila germline. Both local mutagenesis through nonhomologous end joining (NHEJ) and gene replacement via homologous recombination (HR) are stimulated by target cleavage. In this study we investigated the mechanisms that underlie these processes, using materials for the rosy (ry) locus. The frequency of HR dropped significantly in flies homozygous for mutations in spnA (Rad51) or okr (Rad54), two components of the invasion-mediated synthesis-dependent strand annealing (SDSA) pathway. When single-strand annealing (SSA) was also blocked by the use of a circular donor DNA, HR was completely abolished. This indicates that the majority of HR proceeds via SDSA, with a minority mediated by SSA. In flies deficient in lig4 (DNA ligase IV), a component of the major NHEJ pathway, the proportion of HR products rose significantly. This indicates that most NHEJ products are produced in a lig4-dependent process. When both spnA and lig4 were mutated and a circular donor was provided, the frequency of ry mutations was still high and no HR products were recovered. The local mutations produced in these circumstances must have arisen through an alternative, lig4-independent end-joining mechanism. These results show what repair pathways operate on double-strand breaks in this gene targeting system. They also demonstrate that the outcome can be biased toward gene replacement by disabling the major NHEJ pathway and toward simple mutagenesis by interfering with the major HR process.

Donor DNA Utilization During Gene Targeting with Zinc-Finger Nucleases

Gene targeting is the term commonly applied to experimental gene replacement by homologous recombination (HR). This process is substantially stimulated by a double-strand break (DSB) in the genomic target. Zinc-finger nucleases (ZFNs) are targetable cleavage reagents that provide an effective means of introducing such a break in conjunction with delivery of a homologous donor DNA. In this study we explored several parameters of donor DNA structure during ZFN-mediated gene targeting in Drosophila melanogaster embryos, as follows. 1) We confirmed that HR outcomes are enhanced relative to the alternative nonhomologous end joining (NHEJ) repair pathway in flies lacking DNA ligase IV. 2) The minimum amount of homology needed to support efficient HR in fly embryos is between 200 and 500 bp. 3) Conversion tracts are very broad in this system: donor sequences more than 3 kb from the ZFN-induced break are found in the HR products at approximately 50% of the frequency of a marker at the break. 4) Deletions carried by the donor DNA are readily incorporated at the target. 5) While linear double-stranded DNAs are not effective as donors, single-stranded oligonucleotides are. These observations should enable better experimental design for gene targeting in Drosophila and help guide similar efforts in other systems.

Targeted genome engineering techniques in Drosophila

For a century, Drosophila has been a favored organism for genetic research. However, the array of materials and methods available to the Drosophila worker has expanded dramatically in the last decade. The most common gene targeting tools, zinc finger nucleases, TALENs, and RNA-guided CRISPR/Cas9, have all been adapted for use in Drosophila, both for simple mutagenesis and for gene editing via homologous recombination. For each tool, there exist a number of web sites, design applications, and delivery methods. The successful application of any of these tools also requires an understanding of methods for detecting successful genome modifications. This article provides an overview of the available gene targeting tools and their application in Drosophila. In lieu of simply providing a protocol for gene targeting, we direct the researcher to resources that will allow access to the latest research in this rapidly evolving field.

Comparing Zinc Finger Nucleases and Transcription Activator-Like Effector Nucleases for Gene Targeting in Drosophila

Zinc-finger nucleases have proven to be successful as reagents for targeted genome manipulation in Drosophila melanogaster and many other organisms. Their utility has been limited, however, by the significant failure rate of new designs, reflecting the complexity of DNA recognition by zinc fingers. Transcription activator-like effector (TALE) DNA-binding domains depend on a simple, one-module-to-one-base-pair recognition code, and they have been very productively incorporated into nucleases (TALENs) for genome engineering. In this report we describe the design of TALENs for a number of different genes in Drosophila, and we explore several parameters of TALEN design. The rate of success with TALENs was substantially greater than for zinc-finger nucleases , and the frequency of mutagenesis was comparable. Knockout mutations were isolated in several genes in which such alleles were not previously available. TALENs are an effective tool for targeted genome manipulation in Drosophila.

Gene targeting in Drosophila and Caenorhabditis elegans with zinc-finger nucleases.

Zinc-finger nucleases (ZFNs) are promising new tools for enhancing the efficiency of gene targeting in many organisms. Because of the flexibility of zinc finger DNA recognition, ZFNs can be designed to bind many different genomic sequences. The double-strand breaks they create are repaired by cellular processes that generate new mutations at the cleavage site. In addition, the breaks can be repaired by homologous recombination with an exogenous donor DNA, allowing the experimenter to introduce designed sequence alterations. We describe the construction of ZFNs for novel targets and their application to targeted mutagenesis and targeted gene replacement in Drosophila melanogaster and Caenorhabditis elegans.