Kevin Letchford

The use of nanocrystalline cellulose for the binding and controlled release of drugs

The objective of this work was to investigate the use of nanocrystalline cellulose (NCC) as a drug delivery excipient. NCC crystallites, prepared by an acid hydrolysis method, were shown to have nanoscopic dimensions and exhibit a high degree of crystallinity. These crystallites bound significant quantities of the water soluble, ionizable drugs tetratcycline and doxorubicin, which were released rapidly over a 1-day period. Cetyl trimethylammonium bromide (CTAB) was bound to the surface of NCC and increased the zeta potential in a concentration-dependent manner from −55 to 0 mV. NCC crystallites with CTAB-modified surfaces bound significant quantities of the hydrophobic anticancer drugs docetaxel, paclitaxel, and etoposide. These drugs were released in a controlled manner over a 2-day period. The NCC-CTAB complexes were found to bind to KU-7 cells, and evidence of cellular uptake was observed.

In vitro human plasma distribution of nanoparticulate paclitaxel is dependent on the physicochemical properties of poly(ethylene glycol)-block-poly(caprolactone) nanoparticles.

In this study, we synthesized and characterized two methoxy poly(ethylene glycol)-block-poly(caprolactone) (MePEG-b-PCL) amphiphilic diblock copolymers, both based on MePEG with a molecular weight of 5000 g/mol (114 repeat units) and PCL block lengths of either 19 or 104 repeat units. Nanoparticles were formed from these copolymers by a nanoprecipitation and dialysis technique. The MePEG(114)-b-PCL(19) copolymer was water soluble and formed micelles that had a hydrodynamic diameter of 40 nm at all copolymer concentrations tested, and displayed a relatively low core microviscosity. The practically water insoluble MePEG(114)-b-PCL(104) copolymer formed nanoparticles with a larger hydrodynamic diameter, which was dependent on copolymer concentration, and possessed a higher core microviscosity than the MePEG(114)-b-PCL(19) micelles, characteristic of nanospheres. The micelles solubilized a maximum of 1.6% w/w of the hydrophobic anticancer agent, paclitaxel (PTX), and released 92% of their drug payload over 7 days, as compared to the nanospheres, which solubilized a maximum of 3% w/w of PTX and released 60% over the same period of time. Both types of nanoparticles were found to be hemocompatible, causing only minimal hemolysis and no changes in plasma coagulation times as compared to control. Upon in vitro incubation in human plasma, PTX solubilized by micelles had a plasma distribution similar to free drug. The majority of PTX was associated with the lipoprotein deficient plasma (LPDP) fraction, which primarily consists of albumin and alpha-1-acid glycoprotein. In contrast, nanospheres were capable of retaining more of the encapsulated drug with significantly less PTX partitioning into the LPDP fraction.

Synthesis and Characterization of Carboxylic Acid Conjugated, Hydrophobically Derivatized, Hyperbranched Polyglycerols as Nanoparticulate Drug Carriers for Cisplatin

Hyperbranched polyglycerols (HPGs) with hydrophobic cores and derivatized with methoxy poly(ethylene glycol) were synthesized and further functionalized with carboxylate groups to bind and deliver cisplatin. Low and high levels of carboxylate were conjugated to HPGs (HPG-C(8/10)-MePEG(6.5)-COOH(113) and HPG-C(8/10)-MePEG(6.5)-COOH(348)) and their structures were confirmed through NMR and FTIR spectroscopy and potentiometric titration. The hydrodynamic diameter of the HPGs ranged from 5-10 nm and the addition of COOH groups decreased the zeta potential of the polymers. HPG-C(8/10)-MePEG(6.5)-COOH(113) bound up to 10% w/w cisplatin, whereas HPG-C(8/10)-MePEG(6.5)-COOH(348) bound up to 20% w/w drug with 100% efficiency. Drug was released from HPG-C(8/10)-MePEG(6.5)-COOH(113) over 7 days at the same rate, regardless of the pH. Cisplatin release from HPG-C(8/10)-MePEG(6.5)-COOH(348) was significantly slower than HPG-C(8/10)-MePEG(6.5)-COOH(113) at pH 6 and 7.4, but similar at pH 4.5. Release of cisplatin into artificial urine was considerably faster than into buffer. Carboxylated HPGs demonstrated good biocompatibility, and drug-loaded HPGs effectively inhibited proliferation of KU-7-luc bladder cancer cells.

Fusidic acid and rifampicin co-loaded PLGA nanofibers for the prevention of orthopedic implant associated infections.

Implant-associated infections following invasive orthopedic surgery are a major clinical problem, and are one of the primary causes of joint failure following total joint arthroplasty. Current strategies using perioperative antibiotics have been met with little clinical success and have resulted in various systemic toxicities and the promotion of antibiotic resistant microorganisms. Here we report the development of a biodegradable localized delivery system using poly(D,L-lactic acid-co-glycolic acid) (PLGA) for the combinatorial release of fusidic acid (FA) (or its sodium salt; SF) and rifampicin (RIF) using electrospinning. The drug-loaded formulations showed good antibiotic encapsulation (~75%-100%), and a biphasic drug release profile. All dual-loaded formulations showed direct antimicrobial activity in vitro against Staphylococcus epidermidis, and two strains of methicillin-resistant Staphylococcus aureus (MRSA). Furthermore, lead formulations containing 10% (w/w) FA/SF and 5% (w/w) RIF were able to prevent the adherence of MRSA to a titanium implant in an in vivo rodent model of subcutaneous implant-associated infection.

The combined use of paclitaxel-loaded nanoparticles with a low-molecular-weight copolymer inhibitor of P-glycoprotein to overcome drug resistance

Two types of nanoparticles were prepared using the diblock copolymer methoxy poly(ethylene glycol)-block-poly(caprolactone) (MePEG-b-PCL), with either a short PCL block length, which forms micelles, or with a longer PCL block length, which forms kinetically “frozen core” structures termed nanospheres. Paclitaxel (PTX)-loaded micelles and nanospheres were evaluated for their cytotoxicity, cellular polymer uptake, and drug accumulation in drug-sensitive (Madin–Darby Canine Kidney [MDCK]II) and multidrug-resistant (MDR) P-glycoprotein (P-gp)-overexpressing (MDCKII-MDR1) cell lines. Both types of PTX-loaded nanoparticles were equally effective at inhibiting proliferation of MDCKII cells, but PTX-loaded micelles were more cytotoxic than nanospheres in MDCKII-MDR1 cells. The intracellular accumulation of both PTX and the diblock copolymers were similar for both nanoparticles, suggesting that the difference in cytotoxicity might be due to the different drug-release profiles. Furthermore, the cytotoxicity of these PTX-loaded nanoparticles was enhanced when these systems were subsequently or concurrently combined with a low-molecular-weight MePEG-b-PCL diblock copolymer, which we have previously demonstrated to be an effective P-gp inhibitor. These results suggest that the dual functionality of MePEG-b-PCL might be useful in delivering drug intracellularly and in modulating P-gp in order to optimize the cytotoxicity of PTX in multidrug-resistant cells.

Phase Separation Behavior of Fusidic Acid and Rifampicin in PLGA Microspheres

The purpose of this study was to characterize the phase separation behavior of fusidic acid (FA) and rifampicin (RIF) in poly(d,l-lactic acid-co-glycolic acid) (PLGA) using a model microsphere formulation. To accomplish this, microspheres containing 20% FA with 0%, 5%, 10%, 20%, and 30% RIF and 20% RIF with 30%, 20% 10%, 5%, and 0% FA were prepared by solvent evaporation. Drug-polymer and drug-drug compatibility and miscibility were characterized using laser confocal microscopy, Raman spectroscopy, XRPD, DSC, and real-time video recordings of single-microsphere formation. The encapsulation of FA and RIF alone, or in combination, results in a liquid-liquid phase separation of solvent-and-drug-rich microdomains that are excluded from the polymer bulk during microsphere hardening, resulting in amorphous spherical drug-rich domains within the polymer bulk and on the microsphere surface. FA and RIF phase separate from PLGA at relative droplet volumes of 0.311 ± 0.014 and 0.194 ± 0.000, respectively, predictive of the incompatibility of each drug and PLGA. When coloaded, FA and RIF phase separate in a single event at the relative droplet volume 0.251 ± 0.002, intermediate between each of the monoloaded formulations and dependent on the relative contribution of FA or RIF. The release of FA and RIF from phase-separated microspheres was characterized exclusively by a burst release and was dependent on the phase exclusion of surface drug-rich domains. Phase separation results in coalescence of drug-rich microdroplets and polymer phase exclusion, and it is dependent on the compatibility between FA and RIF and PLGA. FA and RIF are mutually miscible in all proportions as an amorphous glass, and they phase separate from the polymer as such. These drug-rich domains were excluded to the surface of the microspheres, and subsequent release of both drugs from the microspheres was rapid and reflected this surface location.

The solid-state characterization of fusidic acid.

PURPOSE The aim of this work was to characterize the solid-state properties of fusidic acid (FA). METHODS Solid forms of FA were prepared by solvent-mediated polymorphic transformation of commercial FA (Form III) in acetonitrile (ACN), and methanol:H(2)O (50:50), or generated by solvent recrystallization from dichloromethane (DCM). Polymorphs were characterized using, X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), polarizing hot stage microscopy (HSM), and intrinsic dissolution rate (IDR). RESULTS Slurrying commercial FA (Form III) in methanol:H(2)O (50:50), yielded a metastable form (Form IV). This metastable form converts to Form I or back to Form III in ACN and H(2)O, respectively, and Form II upon recrystallization from DCM. IDR of Form IV was 0.092 mg/min/cm(2), and was statistically different (p<0.05) from the IDR of Forms I, II, and III, with IDR of 0.053, 0.043, and 0.045mg/min/cm(2), respectively. The amorphous FA had an IDR of 0.125 mg/min/cm(2), and was significantly higher (p<0.05) than any other solid form. There were no statistical differences in the IDR of Form I, II, or III. CONCLUSIONS This work provides evidence for the existence of two previously unreported polymorphic forms of FA (Forms II and IV) and an amorphate.

Same-single-cell analysis using the microfluidic biochip to reveal drug accumulation enhancement by an amphiphilic diblock copolymer drug formulation.

AbstractMultidrug resistance (MDR) is one of the major obstacles in drug delivery, and it is usually responsible for unsuccessful cancer treatment. MDR may be overcome by using MDR inhibitors. Among different classes of these inhibitors that block drug efflux mediated by permeability-glycoprotein (P-gp), less toxic amphiphilic diblock copolymers composed of methoxypolyethyleneglycol-block-polycaprolactone (MePEG-b-PCL) have been studied extensively. The purpose of this work is to evaluate how these copolymer molecules can reduce the efflux, thereby enhancing the accumulation of P-gp substrates (e.g., daunorubicin or DNR) in MDR cells. Using conventional methods, it was found that the low-molecular-weight diblock copolymer, MePEG17-b-PCL5 (PCL5), enhanced drug accumulation in MDCKII-MDR1 cells, but the high-molecular-weight version, MePEG114-b-PCL200 (PCL200), did not. However, when PCL200 was mixed with PCL5 (and DNR) in order to encapsulate them to facilitate drug delivery, there was no drug enhancement effect attributable to PCL5, and the reason for this negative result was unclear. Since drug accumulation measured on different cell batches originated from single cells, we employed the same-single-cell analysis in the accumulation mode (SASCA-A) to find out the reason. A microfluidic biochip was used to select single MDR cells, and the accumulation of DNR was fluorescently measured in real time on these cells in the absence and presence of PCL5. The SASCA-A method allowed us to obtain drug accumulation information faster in comparison to conventional assays. The SASCA-A results, and subsequent curve-fitting analysis of the data, have confirmed that when PCL5 was encapsulated in PCL200 nanoparticles as soon as they were synthesized, the ability of PCL5 to enhance DNR accumulation was retained, thus suggesting PCL200 as a promising delivery system for encapsulating P-gp inhibitors, such as PCL5. Graphical Abstractᅟ

Determining the critical micelle concentration of a novel lipid-lowering agent, disodium ascorbyl phytostanyl phosphate (FM-VP4), using a fluorescence depolarization procedure.

The objective of this study was to determine the critical micelle concentration (CMC) of a novel water‐soluble plant sterol derivative (FM‐VP4) using a fluorescence depolarization method. The CMC was determined by 1,6‐diphenyl‐1,3,5‐hexatriene (DPH) fluorescence depolarization. Test solutions of various concentrations of sodium dodecylsulphate (SDS) as a positive control or FM‐VP4 in water were spiked with 2 µL of 4 mM DPH in tetrahydrofuran (THF) and left overnight to equilibrate in a dark chamber. Fluorescence of each solution was measured at room temperature using a Perseptive Biosystems Cytofluor Series 4000 multi‐well plate reader. Fluorescence intensity increases as DPH is incorporated into the hydrophobic core of micelles. Thus, the CMC is the value at which an abrupt increase in intensity is observed. These points were observed at 8 mM and 0.014 mM for SDS and FM‐VP4, respectively. Sodium dodecylsulphate was used as a positive control and supports the validity of our results, as the literature values of SDS are reported to be between 8–8.3 mM. The CMC of FM‐VP4 is reported to be 0.014 mM.

Controlled delivery of antiangiogenic drug to human eye tissue using a MEMS device

We demonstrate an implantable MEMS drug delivery device to conduct controlled and on-demand, ex vivo drug transport to human eye tissue. Remotely operated drug delivery to human post-mortem eyes was performed via a MEMS device. The developed curved packaging cover conforms to the eyeball thereby preventing the eye tissue from contacting the actuating membrane. By pulsed operation of the device, using an externally applied magnetic field, the drug released from the device accumulates in a cavity adjacent to the tissue. As such, docetaxel (DTX), an antiangiogenic drug, diffuses through the eye tissue, from sclera and choroid to retina. DTX uptake by sclera and choroid were measured to be 1.93±0.66 and 7.24±0.37 μg/g tissue, respectively, after two hours in pulsed operation mode (10 s on/off cycles) at 23°C. During this period, a total amount of 192 ng DTX diffused into the exposed tissue. This MEMS device shows great potential for the treatment of ocular posterior segment diseases such as diabetic retinopathy by introducing a novel way of drug administration to the eye.