Kitty K. K. Ho

Characterization of chemoselective surface attachment of the cationic peptide melimine and its effects on antimicrobial activity.

Antimicrobial peptides (AMPs) are promising alternatives to current treatments for bacterial infections. However, our understanding of the structural-functional relationship of tethered AMPs still requires further investigation to establish a general approach for obtaining consistent antimicrobial surfaces. In this study, we have systematically examined the effects of surface orientation of a broad-spectrum synthetic cationic peptide, melimine, on its antibacterial activity against Gram-positive and Gram-negative bacteria. The attachment of melimine to maleimide-functionalized glass was facilitated by addition of a single cysteine amino acid into the peptide sequence at the N-terminus (CysN) or C-terminus (CysC), or at position 13 (Cys13, approximately central). The successful attachment of the modified melimine was monitored using X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry (ToF-SIMS) with principle component analysis. The ToF-SIMS analysis clearly demonstrated structural difference between the three orientations. The peptide density for the modified surfaces was found to be between 3.5-4.0×10(-9)molcm(-2) using a modified Bradford assay. The ability of the surfaces to resist Pseudomonas aeruginosa and Staphylococcus aureus colonization was compared using fluorescence confocal microscopy. Reductions in total P. aeruginosa and S. aureus adhesion of 70% (p<0.001) and 83% (p<0.001), respectively, after 48h were observed for the melimine samples when compared to the blank control. We found that melimine attached via the N-terminus was the most effective in reducing total bacterial adhesion and bacterial viability with two- and four times (p<0.001) more activity than melimine attached via the C-terminus for P. aeruginosa and S. aureus, respectively. Furthermore, for Cys13, despite having the highest measured peptide density of the three surfaces, the higher concentration did not confer the greatest antibacterial effect. This highlights the importance of orientation of the peptides on the surface to efficacy. Our results suggest that the optimal orientation of the cationic residues is essential for maximum surface activity, whereby the optimal activity is obtained when the cationic portion is more available to interact with colonizing bacteria.

Rational Design of Single-Chain Polymeric Nanoparticles That Kill Planktonic and Biofilm Bacteria

Infections caused by multidrug-resistant bacteria are on the rise and, therefore, new antimicrobial agents are required to prevent the onset of a postantibiotic era. In this study, we develop new antimicrobial compounds in the form of single-chain polymeric nanoparticles (SCPNs) that exhibit excellent antimicrobial activity against Gram-negative bacteria (e.g., Pseudomonas aeruginosa) at micromolar concentrations (e.g., 1.4 μM) and remarkably kill ≥99.99% of both planktonic cells and biofilm within an hour. Linear random copolymers, which comprise oligoethylene glycol (OEG), hydrophobic, and amine groups, undergo self-folding in aqueous systems due to intramolecular hydrophobic interactions to yield these SCPNs. By systematically varying the hydrophobicity of the polymer, we can tune the extent of cell membrane wall disruption, which in turn governs the antimicrobial activity and rate of resistance acquisition in bacteria. We also show that the incorporation of OEG groups into the polymer design is essential in preventing complexation with proteins in biological medium, thereby maintaining the antimicrobial efficacy of the compound even in in vivo mimicking conditions. In comparison to the last-resort antibiotic colistin, our lead agents have a higher therapeutic index (by ca. 2-3 times) and hence better biocompatibility. We believe that the SCPNs developed here have potential for clinical applications and the information pertaining to their structure-activity relationship will be valuable toward the general design of synthetic antimicrobial (macro)molecules.

Quorum sensing inhibitory activities of surface immobilized antibacterial dihydropyrrolones via click chemistry.

Device-related infection remains a major barrier to the use of biomaterial implants as life-saving devices. This study aims to examine the effectiveness and mechanism of action of surface attached dihydropyrrolones (DHPs), a quorum sensing (QS) inhibitor, against bacterial colonization. DHPs were covalently attached on glass surfaces via copper-catalyzed azide-alkyne 1,3-dipolar cycloaddition (CuAAC) click reaction. The covalent attachment of DHP surfaces was confirmed by X-ray photoelectron spectroscopy (XPS) and contact angle measurements, and the antimicrobial efficacy of the DHP coatings was assessed by confocal laser scanning microscopy (CLSM) and image analysis. The results demonstrated that covalently bound DHP compounds are effective in reducing the adhesion by up to 97% (p < 0.05) for both Pseudomonas aeruginosa and Staphylococcus aureus. Furthermore, using the green fluorescent protein (Gfp)-based reporter technology, it is demonstrated that surface attached DHPs were able to repress the expression of a lasB-gfp reporter fusion of P. aeruginosa by 72% (p < 0.001) without affecting cell viability. This demonstrates the ability of the covalently bound QS inhibitor to inhibit QS and suggests the existence of a membrane-based pathway(s) for QS inhibition. Hence, strategies based on incorporation of QS inhibitors such as DHPs represent a potential approach for prevention of device-related infections.

Characterisation and in vitro activities of surface attached dihydropyrrol-2-ones against Gram-negative and Gram-positive bacteria.

Bacterial infection of biomedical devices is still a major barrier to their use. This is compounded by increasing antibiotic resistance. Here, the specific covalent attachment of a series of dihydropyrrol-2-one (DHP), analogues of bacterial quorum sensing inhibitors, to surfaces via a Michael-type addition reaction is described. Differences in efficiency of attachment related to the substituent groups were found by X-ray photoelectron spectroscopy. The physical characteristics of the surfaces were further explored by atomic force microscopy and contact angle measurements. The ability of these coatings to prevent the formation of a biofilm by Pseudomonas aeruginosa and Staphylococcus aureus was examined using confocal laser scanning microscopy and image analysis. The DHP-treated surfaces showed significant reductions in bacterial adhesion without increased killing for both strains of bacteria (p < 0.001). 5-Methylene-1-(prop-2-enoyl)-4-phenyl-dihydropyrrol-2-one was identified as having broad spectrum activity and consequently represents an excellent candidate for the development of novel surfaces for the prevention of biomedical device infections.

Serratia Secondary Metabolite Prodigiosin Inhibits Pseudomonas aeruginosa Biofilm Development by Producing Reactive Oxygen Species that Damage Biological Molecules

Prodigiosin is a heterocyclic bacterial secondary metabolite belonging to the class of tripyrrole compounds, synthesized by various types of bacteria including Serratia species. Prodigiosin has been the subject of intense research over the last decade for its ability to induce apoptosis in several cancer cell lines. Reports suggest that prodigiosin promotes oxidative damage to double-stranded DNA (dsDNA) in the presence of copper ions and consequently leads to inhibition of cell-cycle progression and cell death. However, prodigiosin has not been previously implicated in biofilm inhibition. In this study, the link between prodigiosin and biofilm inhibition through the production of redox active metabolites is presented. Our study showed that prodigiosin (500 μM) (extracted from Serratia marcescens culture) and a prodigiosin/copper(II) (100 μM each) complex have strong RNA and dsDNA cleaving properties while they have no pronounced effect on protein. Results support a role for oxidative damage to biomolecules by H2O2 and hydroxyl radical generation. Further, it was demonstrated that reactive oxygen species scavengers significantly reduced the DNA and RNA cleaving property of prodigiosin. P. aeruginosa cell surface hydrophobicity and biofilm integrity were significantly altered due to the cleavage of nucleic acids by prodigiosin or the prodigiosin/copper(II) complex. In addition, prodigiosin also facilitated the bactericidal activity. The ability of prodigiosinto cause nucleic acid degradation offers novel opportunities to interfere with extracellular DNA dependent bacterial biofilms.

Immobilization of Antibacterial Dihydropyrrol-2-ones on Functional Polymer Supports To Prevent Bacterial Infections In Vivo

ABSTRACT Antibiotic-resistant Staphylococcus aureus is of great concern, as it causes a wide range of life-threatening infections. The current study demonstrates that dihydropyrrolone (DHP)-coated polyacrylamide substrates are effective in reducing the number of culturable clinical isolates of S. aureus in vitro in a dose-dependent manner and are able to reduce the pathogenic potential of staphylococcal infection in a subcutaneous infection model. Covalently bound DHPs therefore show great potential for use as an antimicrobial strategy in device-related applications.

Exploiting the Versatility of Polydopamine-Coated Nanoparticles to Deliver Nitric Oxide and Combat Bacterial Biofilm

In this study, an antimicrobial platform in the form of nitric oxide (NO) gas-releasing polydopamine (PDA)-coated iron oxide nanoparticles (IONPs) is developed for combating bacterial biofilms. NO is bound to the PDA-coated IONPs via the reaction between NO and the secondary amine moieties on PDA to form N-diazeniumdiolate (NONOate) functionality. To impart colloidal stability to the nanoparticles in aqueous solutions (e.g., phosphate buffered saline (PBS) and bacteria cell culture media M9), a polymer bearing hydrophilic and amine pendant groups, P(OEGMA)-b-P(ABA), is synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization and is subsequently grafted onto the PDA-coated IONPs by employing the Schiff base/Michael addition reaction between o-quinone and a primary amine. These nanoparticles are able to effectively disperse Pseudomonas aeruginosa biofilms (up to 79% dispersal) at submicromolar NO concentrations. In addition, the nanoparticles demonstrate excellent bactericidal activity toward P. aeruginosa planktonic and biofilm cells (up to 5-log10 reduction).

Surface Immobilization of Antibacterial Quorum Sensing Inhibitors by Photochemical Activation

Infection of implanted medical devices is one of the major causes of nosocomial infections. A significant proportion of the devices become colonized by bacterial biofilms, thus resulting in high morbidity and risk of mortality. This study focuses on the non-specific covalent attachment of potent quorum sensing (QS) and biofilm inhibiting compounds, furanones (FUs) and dihydropyrrol-2-ones (DHPs), onto glass surfaces by azide/nitrene chemistry. The attachment of FUs and DHPs was confirmed by X-ray photoelectron spectroscopy (XPS) and contact angle measurements. The modified surfaces were then assessed for their antibacterial efficacy against Staphylococcus aureus and Pseudomonas aeruginosa using confocal laser scanning microscopy (CLSM). Both FU and DHP coated surfaces were able to significantly reduce bacterial adhesion (p<0.001) with p-bromophenyl substituted DHP giving maximum reductions of up to 93% and 71% against S. aureus and P. aeruginosa, respectively. Therefore, photoimmobilization of QS inhibitors is an effective technique to produce novel antibacterial biomaterial surfaces.

Development of Fimbrolides, Halogenated Furanones and their Derivatives as Antimicrobial Agents

Traditional treatment for bacterial infection is based on compounds that target bacterial viability or growth. However, a major concern with this approach is the frequent development of drug-resistant mutants. The discovery of bacterial quorum sensing (QS) systems, which control fundamental processes involved in bacterial physiology and virulence, has opened new avenues for the development of antimicrobial agents for the control of bacterial infections. Fimbrolides isolated from Australian native marine alga Delisea pulchra are excellent examples of QS inhibitors provided by nature. Fimbrolides and their analogues exhibit excellent QS inhibitory activity without interfering with bacterial growth, and thus offer promising targets for development of new strategies to control microbial colonisation of surfaces. This chapter describes the types of natural fimbrolides, their biosynthesis, and synthesis of related halogenated furanone and dihydropyrrolone analogues, as well as their biological activities and applications as antimicrobial coatings for the prevention of bacterial infections.

Design and Synthesis of Lactams Derived from Mucochloric and Mucobromic Acids as Pseudomonas aeruginosa Quorum Sensing Inhibitors

Bacterial infections, particularly hospital-acquired infections caused by Pseudomonas aeruginosa, have become a global threat with a high mortality rate. Gram-negative bacteria including P. aeruginosa employ N-acyl homoserine lactones (AHLs) as chemical signals to regulate the expression of pathogenic phenotypes through a mechanism called quorum sensing (QS). Recently, strategies targeting bacterial behaviour or QS have received great attention due to their ability to disarm rather than kill pathogenic bacteria, which lowers the evolutionary burden on bacteria and the risk of resistance development. In the present study, we report the design and synthesis of N-alkyl- and N-aryl 3,4 dichloro- and 3,4-dibromopyrrole-2-one derivatives through the reductive amination of mucochloric and mucobromic acid with aliphatic and aromatic amines. The quorum sensing inhibition (QSI) activity of the synthesized compounds was determined against a P. aeruginosa MH602 reporter strain. The phenolic compounds exhibited the best activity with 80% and 75% QSI at 250 µM and were comparable in activity to the positive control compound Fu-30. Computational docking studies performed using the LasR receptor protein of P. aeruginosa suggested the importance of hydrogen bonding and hydrophobic interactions for QSI.