Renxun Chen

Synthesis, characterization and in vitro activity of a surface-attached antimicrobial cationic peptide

Infection associated with implanted biomaterials is common and costly and such infections are extremely resistant to antibiotics and host defenses. Consequently, there is a need to develop surfaces which resist bacterial adhesion and colonization. The broad spectrum synthetic cationic peptide melimine has been covalently linked to a surface via two azide linkers, 4-azidobenzoic acid (ABA) or 4-fluoro-3-nitrophenyl azide (FNA), and the resulting surfaces characterized by X-ray photoelectron spectroscopy and contact angle measurements. The quantity of bound peptide was estimated by a modified Bradford assay. The antimicrobial efficacy of the two melimine-modified surfaces against Pseudomonas aeruginosa and Staphylococcus aureus was compared by scanning electron microscopy (SEM) and fluorescence microscopy. Attachment of melimine via ABA gave an approximately 4-fold greater quantity of melimine bound to the surface than attachment via FNA. Surfaces melimine-modified by either attachment strategy showed significantly reduced bacterial adhesion for both strains of bacteria. P. aeruginosa exposed to ABA–melimine and FNA–melimine surfaces showed marked changes in cell morphology when observed by SEM and a reduction of approximately 15-fold (p < 0.001) in the numbers of adherent bacteria compared to controls. For the ABA–melimine surface there was a 33% increase in cells showing damaged membranes (p = 0.0016) while for FNA–melimine there was no significant difference. For S. aureus there were reductions in bacterial adhesion of approximately 40-fold (p < 0.0001) and 5-fold (p = 0.008) for surfaces modified with melimine via ABA or FNA, respectively. There was an increase in cells showing damaged membranes on ABA–melimine surfaces of approximately 87% (p = 0.001) compared to controls, while for FNA–melimine there was no significant difference observed. The data presented in this study show that melimine has excellent potential for development as a broad spectrum antimicrobial coating for biomaterial surfaces. Further, it was observed that the efficacy of antimicrobial activity is related to the method of attachment.

Characterization of chemoselective surface attachment of the cationic peptide melimine and its effects on antimicrobial activity.

Antimicrobial peptides (AMPs) are promising alternatives to current treatments for bacterial infections. However, our understanding of the structural-functional relationship of tethered AMPs still requires further investigation to establish a general approach for obtaining consistent antimicrobial surfaces. In this study, we have systematically examined the effects of surface orientation of a broad-spectrum synthetic cationic peptide, melimine, on its antibacterial activity against Gram-positive and Gram-negative bacteria. The attachment of melimine to maleimide-functionalized glass was facilitated by addition of a single cysteine amino acid into the peptide sequence at the N-terminus (CysN) or C-terminus (CysC), or at position 13 (Cys13, approximately central). The successful attachment of the modified melimine was monitored using X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry (ToF-SIMS) with principle component analysis. The ToF-SIMS analysis clearly demonstrated structural difference between the three orientations. The peptide density for the modified surfaces was found to be between 3.5-4.0×10(-9)molcm(-2) using a modified Bradford assay. The ability of the surfaces to resist Pseudomonas aeruginosa and Staphylococcus aureus colonization was compared using fluorescence confocal microscopy. Reductions in total P. aeruginosa and S. aureus adhesion of 70% (p<0.001) and 83% (p<0.001), respectively, after 48h were observed for the melimine samples when compared to the blank control. We found that melimine attached via the N-terminus was the most effective in reducing total bacterial adhesion and bacterial viability with two- and four times (p<0.001) more activity than melimine attached via the C-terminus for P. aeruginosa and S. aureus, respectively. Furthermore, for Cys13, despite having the highest measured peptide density of the three surfaces, the higher concentration did not confer the greatest antibacterial effect. This highlights the importance of orientation of the peptides on the surface to efficacy. Our results suggest that the optimal orientation of the cationic residues is essential for maximum surface activity, whereby the optimal activity is obtained when the cationic portion is more available to interact with colonizing bacteria.

Interaction of the antimicrobial peptide melimine with bacterial membranes

Melimine is a novel cationic peptide possessing broad-spectrum antimicrobial activity that is retained when attached to a surface, suggesting that interactions with bacterial membranes may be of primary importance to its activity. The effects of alterations in the environment on the conformation of melimine were investigated using circular dichroism and fluorescence spectra in membrane-mimetic solvents. Furthermore, the interactions of melimine with bacterial membranes of Pseudomonas aeruginosa and Staphylococcus aureus were examined using scanning electron and fluorescence microscopy, and perturbation of membrane integrity was tested by measurement of melimine-mediated diSC(3)-5 dye release from bacterial cells. Melimine has a predominantly random coil conformation that adopts a helical fold when exposed to organic solvents. However, when it is solubilised in micelles of sodium dodecyl sulphate, which are bacterial membrane-mimetic, the alpha-helical content increases to ca. 35-40%. A major effect of melimine was on the integrity of the cytoplasmic membrane both for P. aeruginosa and S. aureus. However, for P. aeruginosa the rapid loss of cytoplasmic membrane integrity correlated directly with loss of cell viability, whilst for S. aureus maximal dye release was obtained at concentrations where there was no significant loss of viability. There have been few studies to date investigating differences in the action of cationic peptides towards Gram-positive and Gram-negative bacteria. Consequently, further investigation of these mechanistic differences may allow more refined targeting of increasingly difficult-to-treat bacterial infections and/or further inform design of novel peptides with improved broad-spectrum activity.

Quorum sensing inhibitory activities of surface immobilized antibacterial dihydropyrrolones via click chemistry.

Device-related infection remains a major barrier to the use of biomaterial implants as life-saving devices. This study aims to examine the effectiveness and mechanism of action of surface attached dihydropyrrolones (DHPs), a quorum sensing (QS) inhibitor, against bacterial colonization. DHPs were covalently attached on glass surfaces via copper-catalyzed azide-alkyne 1,3-dipolar cycloaddition (CuAAC) click reaction. The covalent attachment of DHP surfaces was confirmed by X-ray photoelectron spectroscopy (XPS) and contact angle measurements, and the antimicrobial efficacy of the DHP coatings was assessed by confocal laser scanning microscopy (CLSM) and image analysis. The results demonstrated that covalently bound DHP compounds are effective in reducing the adhesion by up to 97% (p < 0.05) for both Pseudomonas aeruginosa and Staphylococcus aureus. Furthermore, using the green fluorescent protein (Gfp)-based reporter technology, it is demonstrated that surface attached DHPs were able to repress the expression of a lasB-gfp reporter fusion of P. aeruginosa by 72% (p < 0.001) without affecting cell viability. This demonstrates the ability of the covalently bound QS inhibitor to inhibit QS and suggests the existence of a membrane-based pathway(s) for QS inhibition. Hence, strategies based on incorporation of QS inhibitors such as DHPs represent a potential approach for prevention of device-related infections.

Characterisation and in vitro activities of surface attached dihydropyrrol-2-ones against Gram-negative and Gram-positive bacteria.

Bacterial infection of biomedical devices is still a major barrier to their use. This is compounded by increasing antibiotic resistance. Here, the specific covalent attachment of a series of dihydropyrrol-2-one (DHP), analogues of bacterial quorum sensing inhibitors, to surfaces via a Michael-type addition reaction is described. Differences in efficiency of attachment related to the substituent groups were found by X-ray photoelectron spectroscopy. The physical characteristics of the surfaces were further explored by atomic force microscopy and contact angle measurements. The ability of these coatings to prevent the formation of a biofilm by Pseudomonas aeruginosa and Staphylococcus aureus was examined using confocal laser scanning microscopy and image analysis. The DHP-treated surfaces showed significant reductions in bacterial adhesion without increased killing for both strains of bacteria (p < 0.001). 5-Methylene-1-(prop-2-enoyl)-4-phenyl-dihydropyrrol-2-one was identified as having broad spectrum activity and consequently represents an excellent candidate for the development of novel surfaces for the prevention of biomedical device infections.

Effect of multipurpose solutions on cell morphology and cytokine production by corneal epithelial cells.

Purpose. We sought to determine whether human corneal limbal epithelial cells (HCLE) differ in their physiological response and production of inflammatory mediators during exposure to two multipurpose disinfecting solutions that differ in only four excipients. Methods. HCLE were exposed to dilutions (1%–20%) of OPTI-FREE Express and OPTI-FREE RepleniSH for 2, 6, or 18 h. Cell numbers were measured using CyQuant and metabolic activity assays. Morphology, viability, and apoptotic changes were examined by confocal microscopy after staining with Calcein AM/propidium iodide or Hoechst 33,342/propidiun iodide/YO-PRO-1. Cytokine responses and arachidonic acid metabolites were examined by enzyme-linked immunosorbent assay. Results. OPTI-FREE Express showed greater reductions in corneal cell metabolic activity (up to 3-fold) than OPTI-FREE RepleniSH over 18 h. Cells exposed to OPTI-FREE Express were highly vacuolated, whereas those exposed to OPTI-FREE RepleniSH had morphology consistent with a presumed apoptotic response. OPTI-FREE Express elicited higher levels of interleukin (IL)-6 (maximum 4225 ± 300 pg/mL) and IL-8 (maximum 1094 ± 250 pg/mL) from cells than OPTI-FREE RepleniSH (maximum of 1717 ± 225 pg/mL and 930 ± 300 pg/mL, respectively) at all concentrations tested after 18 h. HCLE did not produce leukotriene B4 or prostaglandin E2 on stimulation, and IL-1&bgr; was produced in low levels, but its production was not different between multipurpose disinfecting solution types. Conclusions. The findings reported here are the first to describe the pattern of cytokine production produced in corneal epithelial cells in response to contact lens solutions. Alteration of only four excipients in the formulations had such effects on corneal epithelia; however, these differences do not explain differences in the incidences of corneal infiltrative events between these solutions. This might indicate that changes in the rates of infiltrative events result from interactions of the solutions with the contact lens surface, or directly with the corneal immune system, or as the result of gram-negative contamination of lens cases.

Immobilization of Antibacterial Dihydropyrrol-2-ones on Functional Polymer Supports To Prevent Bacterial Infections In Vivo

ABSTRACT Antibiotic-resistant Staphylococcus aureus is of great concern, as it causes a wide range of life-threatening infections. The current study demonstrates that dihydropyrrolone (DHP)-coated polyacrylamide substrates are effective in reducing the number of culturable clinical isolates of S. aureus in vitro in a dose-dependent manner and are able to reduce the pathogenic potential of staphylococcal infection in a subcutaneous infection model. Covalently bound DHPs therefore show great potential for use as an antimicrobial strategy in device-related applications.

Crosslinked Platform Coatings Incorporating Bioactive Signals for the Control of Biointerfacial Interactions

Control over biointerfacial interactions on material surfaces is of significant interest in many biomedical applications and extends from the modulation of protein adsorption and cellular responses to the inhibition of bacterial attachment and biofilm formation. Effective control over biointerfaces is best achieved by reducing nonspecific interactions on the surface while also displaying specific bioactive signals. A poly(ethylene glycol) (PEG)-based multifunctional coating has been developed that provides effective reduction of protein fouling while enabling covalent immobilization of peptides in a one or two-step manner. The highly protein resistant properties of the coating, synthesized via the crosslinking of PEG diepoxide and diaminopropane, are confirmed via europium-labeled fibronectin adsorption and cell attachment assays. The ability to covalently incorporate bioactive signals is demonstrated using the cyclic peptides cRGDfK and cRADfK. L929 cells show enhanced attachment on the biologically active cRGDfK containing surfaces, while the surface remains nonadhesive when the nonbiologically active cRADfK peptide is immobilized. The crosslinked PEG-based coating also demonstrates excellent resistance toward Staphylococcus aureus attachment in a 48 h biofilm assay, achieving a >96% reduction compared to the control surface. Additionally, incorporation of the antimicrobial peptide melimine during coating formation further significantly decreases biofilm formation (>99%).

Antimicrobial activity of immobilized lactoferrin and lactoferricin

Lactoferrin and lactoferricin were immobilized on glass surfaces via two linkers, 4-azidobenzoic acid (ABA) or 4-fluoro-3-nitrophenyl azide (FNA). The resulting surfaces were characterized by X-ray photoelectron spectroscopy (XPS) and contact angle measurements. The antimicrobial activity of the surfaces was determined using Pseudomonas aeruginosa and Staphylococcus aureus strains by fluorescence microscopy. Lactoferrin and lactoferricin immobilization was confirmed by XPS showing significant increases (p < 0.05) in nitrogen on the glass surface. The immobilization of both proteins slightly increased the overall hydrophobicity of the glass. Both lactoferrin and lactoferricin immobilized on glass significantly (p < 0.05) reduced the numbers of viable bacterial cells adherent to the glass. For P. aeruginosa, the immobilized proteins consistently increased the percentage of dead cells compared to the total cells adherent to the glass surfaces (p < 0.03). Lactoferrin and lactoferricin were successfully immobilized on glass surfaces and showed promising antimicrobial activity against pathogenic bacteria.

Development of Fimbrolides, Halogenated Furanones and their Derivatives as Antimicrobial Agents

Traditional treatment for bacterial infection is based on compounds that target bacterial viability or growth. However, a major concern with this approach is the frequent development of drug-resistant mutants. The discovery of bacterial quorum sensing (QS) systems, which control fundamental processes involved in bacterial physiology and virulence, has opened new avenues for the development of antimicrobial agents for the control of bacterial infections. Fimbrolides isolated from Australian native marine alga Delisea pulchra are excellent examples of QS inhibitors provided by nature. Fimbrolides and their analogues exhibit excellent QS inhibitory activity without interfering with bacterial growth, and thus offer promising targets for development of new strategies to control microbial colonisation of surfaces. This chapter describes the types of natural fimbrolides, their biosynthesis, and synthesis of related halogenated furanone and dihydropyrrolone analogues, as well as their biological activities and applications as antimicrobial coatings for the prevention of bacterial infections.