Kivanc Akca

Comparative evaluation of the effect of diameter, length and number of implants supporting three-unit fixed partial prostheses on stress distribution in the bone

OBJECTIVES The purpose of this study was to compare the effects of the diameter, the length and the number of implants on stress distribution in the bone around the implants supporting three-unit fixed partial prostheses in the mandibular posterior edentulism. MATERIALS AND METHOD A mandibular Kennedy II three-dimensional finite element model was constructed. Four fixed partial prostheses with two terminal implant supports of various lengths and diameters, and two fixed partial prostheses with three implant supports of various lengths were designed. In separate load cases, 400 N oblique, 200 N vertical, and 57 N horizontal forces were simulated. The tensile and the compressive stress values in the cortical bone around the collar of the implants and Von Mises stresses in the implants were evaluated. RESULTS Although the change in the length of implants did not decrease the stress levels, lower tensile and compressive stress values were observed in the bone for wider implant placement configurations. Similar stress distributions and close stress levels were observed for two wider implant supports in comparison with the three-implant-supported fixed partial prostheses. CONCLUSION With the use of two implants of 4.1-mm diameter and 10-mm length as terminal supports for three-unit fixed prostheses, the magnitude and the distribution of stresses in the cortical bone around the implant collar is within the normal physiological limits.

CAD/CAM Zirconia vs. slip-cast glass-infiltrated Alumina/Zirconia all-ceramic crowns: 2-year results of a randomized controlled clinical trial

The aim of this randomized controlled clinical trial was to compare the early clinical outcome of slip-cast glass-infiltrated Alumina/Zirconia and CAD/CAM Zirconia all-ceramic crowns. A total of 30 InCeram® Zirconia and Cercon® Zirconia crowns were fabricated and cemented with a glass ionomer cement in 20 patients. At baseline, 6-month, 1-year, and 2-year recall appointments, Californian Dental Association (CDA) quality evaluation system was used to evaluate the prosthetic replacements, and plaque and gingival index scores were used to explore the periodontal outcome of the treatments. No clinical sign of marginal discoloration, persistent pain and secondary caries was detected in any of the restorations. All InCeram® Zirconia crowns survived during the 2-year period, although one nonvital tooth experienced root fracture coupled with the fracture of the veneering porcelain of the restoration. One Cercon® Zirconia restoration fractured and was replaced. According to the CDA criteria, marginal integrity was rated excellent for InCeram® Zirconia (73%) and Cercon® Zirconia (80%) restorations, respectively. Slight color mismatch rate was higher for InCeram® Zirconia restorations (66%) than Cercon® Zirconia (26%) restorations. Plaque and gingival index scores were mostly zero and almost constant over time. Time-dependent changes in plaque and gingival index scores within and between groups were statistically similar (p>0.05). This clinical study demonstrates that single-tooth InCeram® Zirconia and Cercon® Zirconia crowns have comparable early clinical outcome, both seem as acceptable treatment modalities, and most importantly, all-ceramic alumina crowns strengthened by 25% zirconia can sufficiently withstand functional load in the posterior zone.

Micro-morphologic changes around biophysically-stimulated titanium implants in ovariectomized rats

BackgroundOsteoporosis may present a risk factor in achievement of osseointegration because of its impact on bone remodeling properties of skeletal phsiology. The purpose of this study was to evaluate micro-morphological changes in bone around titanium implants exposed to mechanical and electrical-energy in osteoporotic rats.MethodsFifteen 12-week old sprague-dowley rats were ovariectomized to develop osteoporosis. After 8 weeks of healing period, two titanium implants were bilaterally placed in the proximal metaphyses of tibia. The animals were randomly divided into a control group and biophysically-stimulated two test groups with five animals in each group. In the first test group, a pulsed electromagnetic field (PEMF) stimulation was administrated at a 0.2 mT 4 h/day, whereas the second group received low-magnitude high-frequency mechanical vibration (MECHVIB) at 50 Hz 14 min/day. Following completion of two week treatment period, all animals were sacrificed. Bone sites including implants were sectioned, removed en bloc and analyzed using a microCT unit. Relative bone volume and bone micro-structural parameters were evaluated for 144 μm wide peri-implant volume of interest (VOI).ResultsMean relative bone volume in the peri-implant VOI around implants PEMF and MECHVIB was significantly higher than of those in control (P < .05). Differences in trabecular-thickness and -separation around implants in all groups were similar (P > .05) while the difference in trabecular-number among test and control groups was significant in all VOIs (P < .05).ConclusionBiophysical stimulation remarkably enhances bone volume around titanium implants placed in osteoporotic rats. Low-magnitude high-frequency MECHVIB is more effective than PEMF on bone healing in terms of relative bone volume.

The Use Of Computerized Tomography for Diagnosis and Treatment Planning in Implant Dentistry

Preoperative radiographic imaging of recipient sites for implant placement is imperative to obtain a functional and aesthetic implant-supported prosthesis. Although conventional radiographic techniques have inherent problems that restrict accurate imaging, the main drawback of panoramic and periapical radiography is the two-dimensional image. Computerized tomography provides cross-sectional radiographic images that facilitate proper assessment of potential recipient sites for implant placement. This paper reviews the role of computerized tomography in implant dentistry.

Marginal Bone Level Changes and Prosthetic Maintenance of Mandibular Overdentures Supported by 2 Implants: A 5‐Year Randomized Clinical Trial

BACKGROUND Documentation of early loading of mandibular overdentures supported by different implant systems is scarce. PURPOSE This study aimed to compare the biologic and prosthetic outcome of mandibular overdentures supported by unsplinted early-loaded one- and two-stage oral implants after 5 years of function. MATERIALS AND METHODS Twenty-eight consecutive patients were screened following an inclusion and exclusion criteria, and randomly allocated to treatment groups. Ball-retained mandibular overdentures were fabricated on two unsplinted Straumann (Institut Straumann AG, Basel, Switzerland) and Brånemark (Nobel Biocare AB, Göteborg, Sweden) dental implants and subjected to an early-loading protocol. During the 5-year period, prosthetic complications were recorded. At 5-years of function, plaque, peri-implant inflammation, bleeding, and calculus index scores were recorded, and standard periapical radiographs were obtained from each implant for measurement of marginal bone loss. RESULTS All implants survived during the observation period. The peri-implant inflammation, bleeding, and calculus index scores around Straumann and Brånemark implants were similar (p > .05). The marginal bone loss around Brånemark implants (1.21 +/- 0.1) was higher than Straumann implants (0.73 +/- 0.06) at 5 years of function (p = .002). Kaplan-Meier tests revealed that 1- and 5-year survival of overdentures on Straumann and Brånemark implants were similar (p = .85). Wear of the ball abutment in the Brånemark group was higher than in the Straumann group (p < .05). Complications regarding the retainer and the need for occlusal adjustments were higher in the Straumann group (p < .05). Chi-square test revealed that the frequency of retightening of the retainer was higher in the Straumann group than in the Brånemark group (p < .05). CONCLUSIONS Mandibular overdentures supported by unsplinted early-loaded Straumann and Brånemark implants lead to similar peri-implant soft tissue and prosthetic outcomes, although higher marginal bone loss could be observed around Brånemark implants after 5 years.

Predicting time-dependent remodeling of bone around immediately loaded dental implants with different designs

The purpose of this study was to predict time-dependent biomechanics of bone around cylindrical screw dental implants with different macrogeometric designs under simulated immediate loading condition. The remodeling of bone around a parallel-sided and a tapered dental implant of same length was studied under 100N oblique load by implementing the Stanford theory into three-dimensional finite element models. The results of the analyses were examined in five time intervals consisting loading immediately after implant placement, and after 1, 2, 3 and 4 weeks following implantation. Maximum principal stress, minimum principal stress, and strain energy density in peri-implant bone and displacement in x-(implant lateral direction with a projection of the oblique force) and y-(implant longitudinal direction) axes of the implant were evaluated. The highest value of the maximum and minimum principal stresses around both implants increased in cortical bone and decreased in trabecular bone. The maximum and minimum principal stresses in cortical bone were higher around the tapered cylindrical implant, but stresses in the trabecular bone were higher around the parallel-sided cylindrical implant. Strain energy density around both implants increased in cortical bone, slightly decreased in trabecular bone, and higher values were obtained for the parallel-sided cylindrical implant. Displacement values slightly decreased in time in x-axis, and an initial decrease followed by a slight increase was observed in the y-axis. Bone responded differently in remodeling for the two implant designs under immediate loading, where the cortical bone carried the highest load. Application of oblique loading resulted in increase of stiffness in the peri-implant bone.

Effects of prosthesis design and impression techniques on human cortical bone strain around oral implants under load

PURPOSE The purpose of this study was to evaluate the effects of two different prosthetic designs (screw-retained versus cement-retained) and two impression techniques (open versus closed tray) on bone-level strains around implants. MATERIALS AND METHODS Two Ø 4.1 mm x 10 mm Straumann implants were placed in the bilateral fibulas of six fresh cadavers; bone segments were removed en bloc. Twelve implant-level and six abutment-level (18 total) working casts were made to fabricate fixed partial dentures, resulting in three test groups: Group 1: closed-tray technique/implant-level model/screw-retained prostheses; Group 2: closed-tray technique/abutment-level model/cement-retained prostheses; Group 3: open-tray technique/implant-level model/screw-retained prostheses. Linear strain-gauges were bonded to the cortical bone between implants and the lateral wall of the fibula in close proximity to the implant necks in each bone fragment. Strain-gauge signals were digitized by a data acquisition system and corresponding software at a sample rate of 10 KHz, simultaneously monitored from the computer during application of an external static load of 150 N on the middle of the pontic, using a loading frame. RESULTS The approximal and lateral strains were extremely similar in both prosthetic groups (p>0.05). Within-group comparisons for the indirect impression technique showed that approximal and lateral strains in screw- and cement-retained prostheses were similar (p>0.05). Neither the prostheses design nor the impression technique had any discernable effect on bone-level strain. CONCLUSION Strains on the cortical bone around two implant supported, 3-unit screw- or cement-retained fixed prostheses, fabricated either by direct or indirect impression techniques on Straumann dental implants, are similar under a 150 N static load.

Predicting bone remodeling around tissue- and bone-level dental implants used in reduced bone width

The objective of this study was to predict time-dependent bone remodeling around tissue- and bone-level dental implants used in patients with reduced bone width. The remodeling of bone around titanium tissue-level, and titanium and titanium-zirconium alloy bone-level implants was studied under 100 N oblique load for one month by implementing the Stanford theory into three-dimensional finite element models. Maximum principal stress, minimum principal stress, and strain energy density in peri-implant bone and displacement in x- and y- axes of the implant were evaluated. Maximum and minimum principal stresses around tissue-level implant were higher than bone-level implants and both bone-level implants experienced comparable stresses. Total strain energy density in bone around titanium implants slightly decreased during the first two weeks of loading followed by a recovery, and the titanium-zirconium implant showed minor changes in the axial plane. Total strain energy density changes in the loading and contralateral sides were higher in tissue-level implant than other implants in the cortical bone at the horizontal plane. The displacement values of the implants were almost constant over time. Tissue-level implants were associated with higher stresses than bone-level implants. The time-dependent biomechanical outcome of titanium-zirconium alloy bone-level implant was comparable to the titanium implant.

A pilot study of joint stability at the zirconium or titanium abutment/titanium implant interface.

PURPOSE To compare the interfaces of loaded and unloaded zirconium and titanium abutments with titanium implants using scanning electron microscopy (SEM). MATERIALS AND METHODS Zirconium and titanium abutments (n = 5 per group; four test and one control) were torque-tightened into titanium implants secured into metal blocks, and computer-aided design/computer-assisted manufacture-based zirconium oxide copings were fabricated and cemented to the abutments with temporary resin-based cement. Specimens of each restoration were subjected to cyclic axial and lateral loading of 30 N at 2 Hz for 500,000 cycles using a servohydraulic test system; control specimens were left unloaded. Then, the abutment/implant assemblies were embedded in acrylic resin, sectioned longitudinally along the midline, and inspected under SEM with x-ray microanalysis. RESULTS Loosening or fracture of the copings and implant components was not observed after dynamic loading in both groups. SEM and x-ray microanalysis revealed unexpected microleakage of acrylic resin at the interface. Acrylic resin in the implants tightened to the titanium abutments was limited to the cervical part, and the components displayed scratched and smashed regions, suggesting slight deformation of the implant neck. Microleakage and pooling of acrylic resin were observed approaching the screw joint in loaded implants tightened to zirconia abutments, and the amount of microleakage was greater than in the unloaded control specimens, which had a larger microgap than the titanium abutment/titanium implant interface. Loaded zirconia abutments were associated with wear, scratches, and, in one sample, chipping. CONCLUSIONS Zirconium abutment/titanium implant interface may be susceptible to wear of the abutment coupled with deformation of the implant neck greater than that associated with the conventional titanium abutment/titanium implant interface under dynamic loading.

A prospective, open-ended, single-cohort clinical trial on early loaded Titanium-zirconia alloy implants in partially edentulous patients: up-to-24-month results.

PURPOSE To evaluate biologic and prosthetic outcomes of titanium-zirconia alloy implants supporting fixed prostheses. MATERIALS AND METHODS A total of 52 titanium-zirconia alloy implants were placed in 23 consecutive patients with partial edentulism. All implants were subjected to an early loading protocol by means of single-unit or up-to-four-unit fixed partial prostheses and observed between 7 and 24 months. The radiographic marginal bone loss and peri-implant soft tissue scores (Plaque Index, Bleeding Index, and Calculus Index) were recorded. In addition, prosthetic complications were recorded during the period of the study. RESULTS Early or late implant failures were not observed, resulting in 100% implant survival and success of the implants. No prosthetic complications were observed. The mean (standard deviation) of marginal bone loss for 52 implants was 0.315 mm (0.24 mm). There were no signs of excessive bone loss with or without swelling or suppuration of the peri-implant soft tissue, and the soft tissue scores indicated good soft tissue integration. CONCLUSIONS Titanium-zirconia alloy implants supporting fixed prostheses showed optimum radiographic, clinical, and prosthetic outcomes in an up-to-24-month assessment period.