Koichiro Hori

Spatial heterogeneity in a lyotropic liquid crystal with hexagonal phase

Non-ionic surfactant hexaethylene glycol, C(12)E(6), in water self-assembles into various kinds of mesophases by varying the surfactant concentration. A spatial heterogeneity was discussed on the basis of the diffusion of probe particles dispersed in the C(12)E(6)-water solution. Interestingly, at 50 wt% C(12)E(6) where the hexagonal structure was formed, two kinds of motion of probe particles were observed: some particles normally diffused while others were restricted, indicating the existence of a heterogeneity in the physical properties. Such heterogeneity can be explained in terms of heterogeneous structures composed of hexagonal domains with isotropic-like regions.

Sorption kinetics of methanol in thin poly(methyl methacrylate) films studied by optical reflectivity

To study the thickness dependence of methanol diffusion into poly(methyl methacrylate) (PMMA) films, an experimental method based on optical reflectivity was proposed. The method can cover a thickness range from the micrometre down to the nanometre scale using a single set-up. Methanol molecules diffuse into PMMA following a Case II mechanism in which they induce segmental motion of the matrix polymer. We observed two diffusion modes, fast and slow, assignable respectively to the outermost layer and the remaining internal region including the substrate interface. When the film becomes thinner, the ratio of the interfacial area to the total volume increases. This results in slowing down of the methanol diffusion due to the contribution of the depressed segmental mobility at the substrate interface. Interestingly, the thickness of the mobility-enhanced layer at the outermost region of the film similarly decreased with decreasing total thickness owing to the effect of the substrate interface.

Optical tweezers with fluorescence detection for temperature-dependent microrheological measurements

We introduce a setup of optical tweezers, capable of carrying out temperature-dependent rheological measurements of soft materials. In our setup, the particle displacement is detected by imaging a bright spot due to fluorescence emitted from a dye-labeled particle against a dark background onto a quadrant photodiode. This setup has a relatively wide space around the sample that allows us to further accessorize the optical tweezers by a temperature control unit. The applicability of the setup was examined on the basis of the rheological measurements using a typical viscoelastic system, namely a worm-like micelle solution. The temperature and frequency dependences of the local viscoelastic functions of the worm-like micelle solution obtained by this setup were in good accordance with those obtained by a conventional oscillatory rheometer, confirming the capability of the optical tweezers as a tool for the local rheological measurements of soft materials. Since the optical tweezers measurements only require a tiny amount of sample (~40 μL), the rheological measurements using our setup should be useful for soft materials of which the available amount is limited.

Time-dependent heterogeneity in viscoelastic properties of worm-like micelle solutions

Surfactant molecules often form micelles with a large aspect ratio, “worm-like” micelles, leading to network structures based on their entanglements. By using optical tweezers, we could detect a heterogeneity in the viscoelastic properties of the worm-like micelle solution, which is observed when the measurement timescale is shorter than the relaxation time − the time at which dissolution of the micelle entanglements occurs.

Nonsolvents-induced swelling of poly(methyl methacrylate) nanoparticles

Polymer nanoparticles have been used in a wide variety of applications. In most of these applications, they are generally dispersed in a non-solvent. However, the effect of the non-solvent on the structure, physical properties and function of the nanoparticles has not yet ever taken into account. In this study, monodispersed poly(methyl methacrylate) (PMMA) nanoparticles were prepared by a surfactant-free emulsion polymerization. The PMMA nanoparticles were dispersed in water and in methanol, both typical non-solvents for PMMA, so that we could discuss the effect of the non-solvent on the nanoparticles. Dynamic light scattering measurements revealed that the hydrodynamic radius of the PMMA nanoparticles in methanol was larger than the same PMMA dispersed in water. Their DLS values were also larger than the radius of the nanoparticles measured by atomic force microscopy. When pyrene was dispersed in methanol with the PMMA nanoparticles, it was incorporated into the nanoparticles. These results clearly indicate that non-solvent molecules can be sorbed into polymer nanoparticles because the area of the interface, where polymer segments might be dissolved into liquid phases, as the total volume is quite larger for such nanoparticles. Therefore, based on our findings, it can be arguably established that the present assumption for a polymer not to be swollen in its non-solvent is not necessarily true.

Load-Induced Frictional Transition at a Well-Defined Alkane Loop Surface

Self-assembled monolayers (SAMs) have attracted considerable attention as a tool to confer desirable properties on material surfaces. So far, molecules used for the SAM formation are generally limited to linear ones and thus chain ends dominate the surface properties. In this study, we have successfully demonstrated unique frictional properties of a SAM composed of alkane loops from cyclic alkanedisulfide on a gold substrate, where both sulfurs are bound to gold. The frictional response was proportional to the load. However, once the load went beyond a threshold value, the frictional response became more dominant. Such a frictional transition was reversible and repeatable and was not discerned for a corresponding SAM composed of n-alkyl chains. The load-induced change in the frictional response from the alkane loops could be associated with the conformational change of the alkane loops. The present results differ from most studies, in which the surface properties are designed on the basis of functional chain end groups.