Koji Oshita

Synthesis of cross-linked chitosan possessing N-methyl-d-glucamine moiety (CCTS-NMDG) for adsorption/concentration of boron in water samples and its accurate measurement by ICP-MS and ICP-AES

A chitosan resin derivatized with N-methyl-d-glucamine (CCTS-NMDG) was synthesized by using a cross-linked chitosan (CCTS) as base material. The N-methyl-d-glucamine (NMDG) moiety was attached to the amino group of CCTS through the arm of chloromethyloxirane. The adsorption behavior of 59 elements on the synthesized resin was systematically examined by using the resin packed in a mini-column, passing water samples through it and measuring the adsorbed elements in eluates by ICP-MS. The CCTS-NMDG resin shows high ability in boron sorption with the capacity of 0.61mmolml(-1) (=2.1mmol g(-1)). The sorption kinetics of this resin was faster than that of the commercially available resins. Other advantages of the synthesized resin are: (1) quantitative collection of boron at neutral pH regions; (2) complete removal of large amounts of matrices; (3) no loss of efficiency over prolonged usage; (4) effective collection of boron in wide range concentration using a mini column containing 1ml resin; (5) complete elution of boron with 1moll(-1) nitric acid. The resin was applied to the collection/concentration of boron in water samples. Boron in tap water and river water was found to be in the range of 6-8microgl(-1). The limit of detection (LOD) of boron after pretreatment with CCTS-NMDG resin and measurement by ICP-MS was 0.07microgl(-1) and the limit of quantification (LOQ) was 0.14microgl(-1) when the volume of each sample and eluent was 10ml.

Synthesis of novel chitosan resin possessing histidine moiety and its application to the determination of trace silver by ICP-AES coupled with triplet automated-pretreatment system.

A novel chitosan resin, cross-linked chitosan functionalized with histidine moiety (histidine-type chitosan resin), was synthesized for the collection and concentration of trace silver in aquatic samples. A triplet automated-pretreatment system (Triplet Auto-Pret System) installed mini-columns packed with the synthesized histidine-type chitosan resin was coupled with an inductively coupled plasma-atomic emission spectrometry (ICP-AES) for a rapid and sensitive analysis. Adsorption behavior of 50 elements on the histidine-type chitosan resin was examined. A trace amount of Ag(I) was shown a good adsorption in wide pH regions (pH 5-9), and Ag(I) adsorbed was readily recovered with 1 M nitric acid solution. The limit of detection (3sigma) for silver was 0.03 microg L(-1). The system was successfully applied to river water and dipped water in silver coated container.

Development of column-pretreatment chelating resins for matrix elimination/multi-element determination by inductively coupled plasma-mass spectrometry

Chelating resins, two kinds of iminodiacetate derivatives (IDA) of cross-linked chitosan (CCS) were synthesized and investigated for adsorption capacity, matrix elimination and collection/concentration of analytes by a column pretreatment in a multi-element ICP-MS determination method. The adsorption behavior of 54 elements at the 10 ng ml(-1) level on chitosan derivatives in a packed mini-column was systematically examined. Almost 30 kinds of metal ions were recovered quantitatively at pH 5 with CCS-HP/IDA (cross-linked chitosan possessing N-2-hydroxypropyl iminodiacetic acid groups) column. Compared with available chitosan-iminodiacetate resin, CHITOPEARL CI-03, the recovery of the metal ions such as Cu, Pb and La is satisfactory with CCS-IDA (cross-linked chitosan possessing N,N-iminodiacetic acid groups) and CCS-HP/IDA using 2 M nitric acid as an eluent, which may be attributed to the difference of cross-linking and macroporous structure. Compared with Chelex-100, the adsorption efficiency is in the order: Chelex-100 > CCS-IDA > CCS-HP/IDA, especially in the chelating ability for alkaline earth metals. The resin with a longer spacer (CCS-HP/IDA) showed higher adsorption selectivity between heavy metal ions and alkaline earth metals at pH < 7. The separation efficiency of the major matrix cations in seawater (Na. K, Mg, Ca) has also been investigated, and matrix interference was negligible even in a seawater sample at pH 5 with CCS-HP/IDA. The recoveries of Mn at pH 5 with CCS-HP/IDA or Chelex-100 were almost 100%. However, those of Mg with each resin were 4 or 98%, respectively. The adsorption capacities of synthesized CCS-HP/IDA for Cu(II), Pb(II) and La(III) were 0.90, 0.65 and 0.34 mmol g(-1), respectively. Therefore, the chelating chitosan resins developed are applicable to the pretreatment of trace amounts of elements in various kinds of water samples.

Adsorption behavior of uranium(VI) and other ionic species on cross-linked chitosan resins modified with chelating moieties.

Cross-linked chitosan resins with catechol (catechol-type chitosan, type 1 and type 2), iminodiacetic acid (IDA-type chitosan), iminodimetylphosphonic acid (IDP-type chitosan), phenylarsonic acid (phenylarsonic acid-type chitosan), or serine (serine-type chitosan) were prepared for the collection and concentration of uranium(VI). The adsorption behavior of U(VI) and other ionic species, such as metal ions and oxo-acid ions, on the cross-linked chitosan (base material) and chitosan resins modified with chelating moieties was examined using a column procedure. Especially, the catechol-type chitosan (type 2) adsorbed U(VI) at pH 2-7, and selectively collected U(VI) at acidic pH regions by forming a stable chelate with hydroxyl groups of catechol moiety introduced to the chitosan. Also, the adsorption properties of cationic and anionic species present in aquatic media were elucidated. The adsorption ability for U(VI) was in the order: catechol-type chitosan (type 2)>serine-type chitosan>phenylarsonic acid-type chitosan>the others. The catechol-type chitosan (type 2) was useful for the collection and concentration of uranium(VI).

Synthesis of chitosan-based resins modified with tris(2-aminoethyl)amine moiety and its application to collection/concentration and determination of trace mercury by inductively coupled plasma atomic emission spectrometry.

A novel chitosan-based chelating resin modified with tris(2-aminoethyl)amine moiety (CCTS-TAA) was synthesized, and its characteristics in the collection/concentration of mercury was examined. The synthesized resin showed good adsorption toward mercury in a wide pH range, and the adsorbed mercury can be easily eluted by using 2M HNO(3) without any addition of complexing agent. The resin was then packed in a mini-column and the mini-column was installed on a computer-controlled automated-pretreatment (Auto-Pret) system coupled with inductively coupled plasma-atomic emission spectroscopy (ICP-AES) for on-line mercury collection and determination at trace level.

Synthesis of cross-linked chitosan functionalized with threonine moiety and its application to on-line collection/concentration and determination of Mo, V and Cu

A novel chitosan-based resin functionalized with threonine moiety was synthesized, and applied to the collection/concentration of Mo, V and Cu in environmental water samples, followed by their determination using inductively coupled plasma-atomic emission spectrometer (ICP-AES). The synthesized resin, cross-linked chitosan-threonine (CCTS-Thr), showed good adsorption behavior toward trace amounts of Mo, V and Cu in a wide pH range. The adsorbed elements can be easily eluted using 2molL(-1) of nitric acid, and their recoveries were found to be 90-100%. The CCTS-Thr was packed in a mini-column, which was then installed in a computer-controlled auto-pretreatment system (Auto-Pret System) for on-line trace elements collection and determination by ICP-AES. Experimental parameters related to the improvement of sensitivity and reproducibility were optimized. The limits of detection (LODs) for target metals were found to be in sub-ppb level. The proposed method with CCTS-Thr resin was successfully applied to the determination of Mo, V and Cu in environmental water samples. The recovery test showed that common matrices which exist in environmental water samples did not interfere with the determination.

Flow-injection determination of hydrogen peroxide based on fluorescence quenching of chromotropic acid catalyzed with Fe(II).

Flow-injection analysis system (FIA system), which was based on Fe(II)-catalyzed oxidation of chromotropic acid with hydrogen peroxide, was developed for the determination of hydrogen peroxide. The chromotropic acid has a fluorescence measured at lambda(em)=440 nm (emission wavelength) with lambda(ex)=235 nm (excitation wavelength), and the fluorescence intensity at lambda(em)=440 nm quietly decreased in the presence of hydrogen peroxide and Fe(II), which was caused by Fe(II)-catalyzed oxidation of chromotropic acid with hydrogen peroxide. By measuring the difference of fluorescence intensity, hydrogen peroxide (1.0 x 10(-8)-1.0 x 10(-3) mol L(-1)) could be determined by the proposed FIA system, whose analytical throughput was 40 samples h(-1). The relative standard deviation (RSD) was 1.03% (n=10) for 4.0 x 10(-8) mol L(-1) hydrogen peroxide. The proposed FIA technique could be applied to the determination of hydrogen peroxide in rain water samples.

Complex formation analysis of water-soluble calixarenes by capillary zone electrophoresis.

The equilibria of complex formation reactions between various kinds of cations and anionic calixarenes in an aqueous solution were analyzed by capillary zone electrophoresis on the basis of the change in electrophoretic mobility of the calixarenes. The apparent electrophoretic mobility of the calixarenes decreased with increasing concentrations of alkali metal ions and quaternary ammonium ions. Equilibrium constants were determined by a non-liner least-squares analysis using the changes in apparent electrophoretic mobility. The complex formation constants obtained with alkali metal ions were in the order of 10(2.3) - 10(3.0), and those with quaternary ammonium ions were 10(2.9) - 10(4.2), providing less selectivity among them. The selectivity of the calixarene toward alkali metal and quaternary ammonium ions in aqueous solution involves flexible structure, and compensative interactions of electrostatic and hydrophobic interactions. From the results obtained in this work, the electrophoretic method has proved to be useful for analyzing the reactivity of anionic calixarene in aqueous solution.