Kristofer L. Marsh

3D Freeze-Casting of Cellular Graphene Films for Ultrahigh-Power-Density Supercapacitors.

3D cellular graphene films with open porosity, high electrical conductivity, and good tensile strength, can be synthesized by a method combining freeze-casting and filtration. The resulting supercapacitors based on 3D porous reduced graphene oxide (RGO) film exhibit extremely high specific power densities and high energy densities. The fabrication process provides an effective means for controlling the pore size, electronic conductivity, and loading mass of the electrode materials, toward devices with high energy-storage performance.

Low-Fouling Antibacterial Reverse Osmosis Membranes via Surface Grafting of Graphene Oxide.

Azide-functionalized graphene oxide (AGO) was covalently anchored onto commercial reverse osmosis (RO) membrane surfaces via azide photochemistry. Surface modification was carried out by coating the RO membrane with an aqueous dispersion of AGO followed by UV exposure under ambient conditions. This simple process produces a hydrophilic, smooth, antibacterial membrane with limited reduction in water permeability or salt selectivity. The GO-RO membrane exhibited a 17-fold reduction in biofouling after 24 h of Escherichia coli contact and almost 2 times reduced BSA fouling after a 1 week cross-flow test compared to its unmodified counterpart.

Scalable Antifouling Reverse Osmosis Membranes Utilizing Perfluorophenyl Azide Photochemistry

We present a method to produce anti-fouling reverse osmosis (RO) membranes that maintains the process and scalability of current RO membrane manufacturing. Utilizing perfluorophenyl azide (PFPA) photochemistry, commercial reverse osmosis membranes were dipped into an aqueous solution containing PFPA-terminated poly(ethyleneglycol) species and then exposed to ultraviolet light under ambient conditions, a process that can easily be adapted to a roll-to-roll process. Successful covalent modification of commercial reverse osmosis membranes was confirmed with attenuated total reflectance infrared spectroscopy and contact angle measurements. By employing X-ray photoelectron spectroscopy, it was determined that PFPAs undergo UV-generated nitrene addition and bind to the membrane through an aziridine linkage. After modification with the PFPA-PEG derivatives, the reverse osmosis membranes exhibit high fouling-resistance.

Cadmium nanoclusters in a protein matrix: Synthesis, characterization, and application in targeted drug delivery and cellular imaging

Biotemplated metal nanoclusters have garnered much attention owing to their wide range of potential applications in biosensing, bioimaging, catalysis, and nanomedicine. Here, we report the synthesis of stable, biocompatible, water-soluble, and highly fluorescent bovine serum albumin-templated cadmium nanoclusters (CdNCs) through a facile one-pot green method. We covalently conjugated hyaluronic acid (HA) to the CdNCs to form a pH-responsive, tumortargeting theranostic nanocarrier with a sustained release profile for doxorubicin (DOX), a model anticancer drug. The nanocarrier showed a DOX encapsulation efficiency of about 75.6%. DOX release profiles revealed that 74% of DOX was released at pH 5.3, while less than 26% of DOX was released at pH 7.4 within the same 24-h period. The nanocarrier selectively recognized MCF-7 breast cancer cells expressing CD44, a cell surface receptor for HA, whereas no such recognition was observed with HA receptor-negative HEK293 cells. Biocompatibility of the nanocarrier was evaluated through cytotoxicity assays with HEK293 and MCF-7 cells. The nanocarrier exhibited very low to no cytotoxicity, whereas the DOX-loaded nanocarrier showed considerable cellular uptake and enhanced MCF-7 breast cancer cell-killing ability. We also confirmed the feasibility of using the highly fluorescent nanoconjugate for bioimaging of MCF-7 and HeLa cells. The superior targeted drug delivery efficacy, cellular imaging capability, and low cytotoxicity position this nanoconjugate as an exciting new nanoplatform with promising biomedical applications.

Synthesis of N = 8 Armchair Graphene Nanoribbons from Four Distinct Polydiacetylenes

We demonstrate a highly efficient thermal conversion of four differently substituted polydiacetylenes (PDAs 1 and 2a-c) into virtually indistinguishable N = 8 armchair graphene nanoribbons ([8]AGNR). PDAs 1 and 2a-c are themselves easily accessed through photochemically initiated topochemical polymerization of diynes 3 and 4a-c in the crystal. The clean, quantitative transformation of PDAs 1 and 2a-c into [8]AGNR occurs via a series of Hopf pericyclic reactions, followed by aromatization reactions of the annulated polycyclic aromatic intermediates, as well as homolytic bond fragmentation of the edge functional groups upon heating up to 600 °C under an inert atmosphere. We characterize the different steps of both processes using complementary spectroscopic techniques (CP/MAS 13C NMR, Raman, FT-IR, and XPS) and high-resolution transmission electron microscopy (HRTEM). This novel approach to GNRs exploits the power of crystal engineering and solid-state reactions by targeting very large organic structures through programmed chemical transformations. It also affords the first reported [8]AGNR, which can now be synthesized on a large scale via two operationally simple and discrete solid-state processes.

Embedding hollow Co3O4 nanoboxes into a three-dimensional macroporous graphene framework for high-performance energy storage devices

Carbon materials are widely used for supercapacitor applications thanks to their high surface area, good rate capability, and excellent cycling stability. However, the development of high energy density carbon supercapacitors still remains a challenge. In this work, hollow Co3O4 nanoboxes have been embedded into three-dimensional macroporous laser-scribed graphene (LSG) to produce composite electrodes with improved electrochemical performance. Here, Co3O4 provides high capacity through fast and reversible redox reactions, while LSG serves as a conductive network to maintain high power. The open nanobox morphology is a unique solution for extracting the maximum capacity from Co3O4, resulting in electrodes whose surfaces, both internal and external, are accessible to the electrolyte. The electrochemical performance of the composite material is promising with a volumetric capacity of 60.0 C/cm3 and a specific capacity of 542.3 C/g, corresponding to 682.0 C/g of the constituent Co3O4. With a low equivalent series resistance of 0.9 Ω, the Co3O4/LSG electrode is able to maintain 113.1% of its original capacity after 10,000 cycles. This work provides new insights into the design of high-performance carbon/metal oxide nanocomposites for next-generation energy storage devices.