Kristy Kormondy

A general approach for high yield fabrication of CMOS-compatible all-semiconducting carbon nanotube field effect transistors

We report strategies to achieve both high assembly yield of carbon nanotubes at selected positions of the circuit via dielectrophoresis (DEP) and field effect transistor (FET) yield using an aqueous solution of semiconducting-enriched single-walled carbon nanotubes (s-SWNTs). When the DEP parameters were optimized for the assembly of individual s-SWNTs, 97% of the devices showed FET behavior with a maximum mobility of 210 cm2 V(-1) s(-1), on-off current ratio ∼10(6) and on-conductance up to 3 µS, but with an assembly yield of only 33%. As the DEP parameters were optimized so that one to five s-SWNTs are connected per electrode pair, the assembly yield was almost 90%, with ∼90% of these assembled devices demonstrating FET behavior. Further optimization gave an assembly yield of 100% with up to 10 SWNTs per site, but with a reduced FET yield of 59%. Improved FET performance including higher current on-off ratio and high switching speed were obtained by integrating a local Al2O3 gate to the device. Our 90% FET with 90% assembly yield is the highest reported so far for carbon nanotube devices. Our study provides a pathway which could become a general approach for the high yield fabrication of complementary metal oxide semiconductor (CMOS)-compatible carbon nanotube FETs.

ELNES spectrum unmixing and mapping for oxide/oxide interfaces.

1. School of Engineering for Matter, Transport and Energy, Arizona State University, Tempe, AZ 85287 2. Department of Physics, University of Texas at Austin, Austin, TX 78712 3. Department of Chemical Engineering, University of Texas at Austin, Austin, TX 78712 4. LeRoy Eyring Center for Solid State Science, Arizona State University, Tempe AZ 85287 5. Department of Physics, Arizona State University, Tempe, AZ 85287