Kwangnak Koh

Green synthesis of phytochemical-stabilized Au nanoparticles under ambient conditions and their biocompatibility and antioxidative activity

Green chemical synthesis of Au nanoparticles (NPs) has been of great interest because of its potential biomedical applications. In this study, we successfully produced phytochemical-induced Au NPs cofunctionalized with gallic acid, protocatechuic acid, and isoflavone. They have a strong antioxidant effect and serve as effective reducing agents, inducing the immediate passivation of Au NPs. The properties of these green chemical Au NPs were characterized by TEM, UV/Vis and FT-IR spectroscopy, and ζ-potential measurements, and the Au NPs exhibited excellent homogeneity with an average diameter of 20 nm and high dispersity at all pH ranges, with long-term stability as well as excellent cytocompatibility. Molecular dynamics (MD) simulations were also carried out in order to reveal the surface stability of the Au NPs. The computational results indicate that there are strong interactions between the phytochemicals and Au NPs, especially in the Au/protocatechuic acid–isoflavone model. Phytochemical-stabilized Au NPs allowed about 40% H2O2 to be removed at an NP concentration of 50 μg mL−1; this removal rate is the same as that achieved by 3000 units per mg catalase. Therefore, this novel synthesis route for Au NPs using phytochemical reducing agents may be effectively exploited for nonthermal-assisted reactions and one-pot processes of biological applications.

Fabrication of a protease sensor for caspase-3 activity detection based on surface plasmon resonance.

Diagnosis of apoptosis is essential to the early detection of therapy efficiency and the evaluation of disease progression. Caspase-3 is supposed to be closely related to cellular apoptosis. We describe here a label-free surface plasmon resonance (SPR) detection of apoptosis based on caspase-3 activity assay through enzyme digestion. An artificial peptide sequence was designed as a substrate of caspase-3 and immobilized on a gold disk through covalent binding. The 4Lys part at the end of the pentadecyl-peptide was designed to form a unique peptide array through electrostatic repulsion. The immobilization of the peptide on the gold surface was carefully characterized by SPR and atomic force microscopy. The catalytic conditions of caspase-3 were optimized with electrochemical impedance spectroscopy. The detection limit of caspase-3 was found at a concentration of 1 pg mL(-1). The activity of caspase-3 in apoptotic cells could also be measured sensitively by the one-step and intuitional SPR response decrease. The fabricated simple and convenient caspase-3 sensor is proposed for application in clinical analysis.

Sensitive cell apoptosis assay based on caspase-3 activity detection with graphene oxide-assisted electrochemical signal amplification.

This paper reports a novel approach for the simple assays of cell apoptosis using electrochemical technique. In this study, caspase-3 activity, which was detected with differential plus voltammetry (DPV) as an alternative to conventional spectrometry approach, was employed as an indicator of cell apoptosis and, while an acetylated peptide Ac-GGHDEVDHGGGC was used as the blocked substrate. In the presence of casepase-3, the hydrolysis of blocked peptide might release active amine groups, which could covalently conjugate with graphene oxide. Therefore, electroactive methylene blue molecules could be further attached to the electrode surface through π-π stacking and electrostatic interactions. Using this proposed new method, a very sensitive detection of caspase-3 could be achieved with a low detection limit of 0.06 pg/mL, and a new method for sensitive detection of cell apoptosis was developed. Moreover, we have successfully used this new method to detect cell apoptosis with human pulmonary carcinoma A549 cell after apoptosis inducing.

Molecular recognition of arginine by supramolecular complexation with calixarene crown ether based on surface plasmon resonance.

Arginine plays an important role in cell division and the functioning of the immune system. We describe a novel method by which arginine can be identified using an artificial monolayer based on surface plasmon resonance (SPR). The affinity of arginine binding its recognition molecular was compared to that of lysine. In fabrication of an arginine sensing interface, a calix[4]crown ether monolayer was anchored onto a gold surface and then characterized by Fourier Transform infrared reflection absorption spectroscopy, atomic force microscopy, and cyclic voltammetry. The interaction between arginine and its host compound was investigated by SPR. The calix[4]crown ether was found to assemble as a monolayer on the gold surface. Recognition of calix[4]crown monolayer was assessed by the selective binding of arginine. Modification of the SPR chip with the calix[4]crown monolayer provides a reliable and simple experimental platform for investigation of arginine under aqueous conditions.

Building a novel vitronectin assay by immobilization of integrin on calixarene monolayer

Membrane proteins possess significant hydrophobic domains and are likely to deplete their native activity immobilized on the solid surface relative to those occurring in a membrane environment. To investigate an efficient immobilization method, calix[4]crown-ether monolayer as an artificial protein linker system was constructed on the gold surface and characterized by Fourier transform infrared reflection absorption spectroscopy (FTIR-RAS), atomic force microscopy (AFM) and cyclic voltammetry (CV). Integrin alpha(v)beta3 was functionally immobilized onto the monolayer and the integrin-vitronectin interaction was investigated by surface plasmon resonance (SPR). It was found that calix[4]crown-ether was assembled as a monolayer on the gold surface. Orientation and accessibility of integrin alpha(v)beta3 was assessed by sensitive binding of its natural ligand, vitronectin at pg mL(-1) level. Moreover, surface coverage of integrin layer and thickness calculated through SPR curve simulation verified that integrin layer was a monolayer in activated form. In combination with the SPR method, this calix[4]crown monolayer provided a reliable and simple experimental platform for the investigation of isolated membrane proteins under experimental conditions resembling those of their native properties.

Polymeric waveguide biosensors with calixarene monolayer for detecting potassium ion concentration

Biophotonic sensors based on a polymer waveguide with Bragg reflection gratings are proposed in this work. For developing low-cost disposable sensors, UV curable polymer materials are utilized to demonstrate the waveguide sensors. The grating pattern is formed on the core layer of a polymer waveguide by exposing a laser interference pattern on a photoresist. To detect a small amount of analyte molecule through a specific binding, a calixarene crown molecule is immobilized on a sensing interface. Bragg reflection peak movement is observed depending on the potassium ion concentration dissolved in phosphate buffered saline solution. It has been confirmed experimentally that the sensor could detect the potassium ion concentration on the order of 1pM.

Fabrication of Calix[4]arene Derivative Monolayers to Control Orientation of Antibody Immobilization

Three calix[4]arene (Cal-4) derivatives which separately contain ethylester (1), carboxylic acid (2), and crownether (3) at the lower rim with a common reactive thiol at the upper rim were synthesized and constructed to self-assembled monolayers (SAMs) on Au films. After spectroscopic characterization of the monolayers, surface coverage and orientation of antibody immobilized on the Cal-4 derivative SAMs were studied by surface plasmon resonance (SPR) technique. Experimental results revealed that the antibody could be immobilized on the Cal-4 derivatives spontaneously. The orientation of absorbed antibody on the Cal-4 derivative SAMs is related to the SAM’s dipole moment. The possible orientations of the antibody immobilized on the Cal-4 derivative 1 SAM are lying-on or side-on, while on the Cal-4 derivative 2 and Cal-4 derivative 3 head-on and end-on respectively. These experimental results demonstrate the surface dipole moment of Cal-4 derivative appears to be an important factor to antibody orientation. Cal-4 derivatives are useful in developing site direct protein chips.

Development and Evaluation of Oligonucleotide Chip Based on the 16S-23S rRNA Gene Spacer Region for Detection of Pathogenic Microorganisms Associated with Sepsis

ABSTRACT Oligonucleotide chips targeting the bacterial internal transcribed spacer region (ITS) of the 16S-23S rRNA gene, which contains genus- and species-specific regions, were developed and evaluated. Forty-three sequences were designed consisting of 1 universal, 3 Gram stain-specific, 9 genus-specific, and 30 species-specific probes. The specificity of the probes was confirmed using bacterial type strains including 54 of 52 species belonging to 18 genera. The performance of the probes was evaluated using 825 consecutive samples that were positive by blood culture in broth medium. Among the 825 clinical specimens, 708 (85.8%) were identified correctly by the oligonucleotide chip. Most (536 isolates, or 75.7%) were identified as staphylococci, Escherichia coli, or Klebsiella pneumoniae. Thirty-seven isolates (4.5%) did not bind to the corresponding specific probes. Most of these also were staphylococci, E. coli, or K. pneumoniae and accounted for 6.3% of total number of the species. Sixty-two specimens (7.5%) did not bind the genus- or species-specific probes because of lack of corresponding specific probes. Among them, Acinetobacter baumannii was the single most frequent isolate (26/62). The oligonucleotide chip was highly specific and sensitive in detecting the causative agents of bacteremia directly from positive blood cultures.

Hydroxyapatite coating on damaged tooth surfaces by immersion

Hydroxyapatite (HAp) was coated on scratched areas of a human tooth and HAp disks by the immersion method in a HAp colloidal solution (< or =20 microm of average diameter dispersed in DI water). The surface morphologies of the scratched area after immersion for 1-3 months were investigated showing that the damaged surfaces were remarkably recovered. Then, the mechanical property and chemical stability of the HAp coating layers on both specimens were determined via the Vickers hardness test and concentration measurement of extracted Ca2+ ions, respectively, after strong acidic treatment. The cellular behavior of mouse calvaria-derived pre-osteoblastic cells (MC3T3-E1) was also examined on the HAp layers regenerated on micro-scratched HAp disks for the purpose of their potential applications on maxillofacial bone conservation and reconstruction for prosthetic dentistry, and artificial disk preparation of a vertebral column. The notable loss of Ca2+ ions under a highly acidic condition was not observed in the layers coated by HAp adsorption, indicating that the coating surface was well adhered with the original surfaces of the respective specimen. Moreover, the HAp adsorption did not adversely affect the adhesion, growth and proliferation of MC3T3-E1 cells on the coated HAp layers for up to 21 days. These results suggest that the HAp coating on the scratched areas of the tooth would be effectively applicable for the development of long-term prevention of micro-cleavage and tooth health supporters to reduce discoloration and further maxillofacial and orthopedic applications.

Sensitive colorimetric assays for α-glucosidase activity and inhibitor screening based on unmodified gold nanoparticles

A colorimetric sensor has been developed in this work to sensitively detect α-glucosidase activity and screen α-glucosidase inhibitors (AGIs) utilizing unmodified gold nanoparticles (AuNPs). The sensing strategy is based on triple-catalytic reaction triggered by α-glucosidase. In the presence of α-glucosidase, aggregation of AuNPs is prohibited due to the oxidation of cysteine to cystine in the system. However, with addition of AGIs, cysteine induced aggregation of AuNPs occurs. Thus, a new method for α-glucosidase activity detection and AGIs screening is developed by measuring the UV-vis absorption or visually distinguishing. A well linear relation is presented in a range of 0.0025-0.05 U mL(-1). The detection limit is found to be 0.001 U mL(-1) for α-glucosidase assay, which is one order of magnitude lower than other reports. The IC50 values of four kinds of inhibitors observed with this method are in accordance with other reports. The using of unmodified AuNPs in this work avoids the complicated and time-consuming modification procedure. This simple and efficient colorimetric method can also be extended to other enzymes assays.