Kwi-Il Park

Piezoelectric BaTiO3 Thin Film Nanogenerator on Plastic Substrates

The piezoelectric generation of perovskite BaTiO3 thin films on a flexible substrate has been applied to convert mechanical energy to electrical energy for the first time. Ferroelectric BaTiO3 thin films were deposited by radio frequency magnetron sputtering on a Pt/Ti/SiO2/(100) Si substrate and poled under an electric field of 100 kV/cm. The metal-insulator (BaTiO3)-metal-structured ribbons were successfully transferred onto a flexible substrate and connected by interdigitated electrodes. When periodically deformed by a bending stage, a flexible BaTiO3 nanogenerator can generate an output voltage of up to 1.0 V. The fabricated nanogenerator produced an output current density of 0.19 μA/cm(2) and a power density of ∼7 mW/cm(3). The results show that a nanogenerator can be used to power flexible displays by means of mechanical agitations for future touchable display technologies.

Flexible Nanocomposite Generator Made of BaTiO 3 Nanoparticles and Graphitic Carbons

Outdoor renewable energy sources such as solar energy (15 000 μ W/cm 3 ), [ 3 , 4 ] wind energy (380 μ W/cm 3 ), [ 5 ] and wave energy (1 000 W/cm of wave crest length) [ 6 , 7 ] can provide largescale needs of power. However, for driving small electronics in indoor or concealed environments [ 3 , 8 ] (such as in tunnels, clothes, and artifi cial skin) and implantable biomedical devices, innovative approaches have to be developed. One way of energy harvesting without such restraints is to utilize piezoelectric materials that can convert vibrational and mechanical energy sources from human activities such as pressure, bending, and stretching motions into electrical energy. [ 9–11 ]

Bendable Inorganic Thin-Film Battery for Fully Flexible Electronic Systems

High-performance flexible power sources have gained attention, as they enable the realization of next-generation bendable, implantable, and wearable electronic systems. Although the rechargeable lithium-ion battery (LIB) has been regarded as a strong candidate for a high-performance flexible energy source, compliant electrodes for bendable LIBs are restricted to only a few materials, and their performance has not been sufficient for them to be applied to flexible consumer electronics including rollable displays. In this paper, we present a flexible thin-film LIB developed using the universal transfer approach, which enables the realization of diverse flexible LIBs regardless of electrode chemistry. Moreover, it can form high-temperature (HT) annealed electrodes on polymer substrates for high-performance LIBs. The bendable LIB is then integrated with a flexible light-emitting diode (LED), which makes an all-in-one flexible electronic system. The outstanding battery performance is explored and well supported by finite element analysis (FEA) simulation.

Highly‐Efficient, Flexible Piezoelectric PZT Thin Film Nanogenerator on Plastic Substrates

A highly-efficient, flexible piezoelectric PZT thin film nanogenerator is demonstrated using a laser lift-off (LLO) process. The PZT thin film nanogenerator harvests the highest output performance of ∼200 V and ∼150 μA·cm(-2) from regular bending motions. Furthermore, power sources generated from a PZT thin film nanogenerator, driven by slight human finger bending motions, successfully operate over 100 LEDs.

Self-Powered Cardiac Pacemaker Enabled by Flexible Single Crystalline PMN-PT Piezoelectric Energy Harvester

A flexible single-crystalline PMN-PT piezoelectric energy harvester is demonstrated to achieve a self-powered artificial cardiac pacemaker. The energy-harvesting device generates a short-circuit current of 0.223 mA and an open-circuit voltage of 8.2 V, which are enough not only to meet the standard for charging commercial batteries but also for stimulating the heart without an external power source.

Virus-Directed Design of a Flexible BaTiO3 Nanogenerator

Biotemplated synthesis of functional nanomaterials has received increasing attention for applications in energy, catalysis, bioimaging, and other technologies. This approach is justified by the unique abilities of biological systems to guide sophisticated assembly and organization of molecules and materials into distinctive nanoscale morphologies that exhibit physicochemical properties highly desirable for specific purposes. Here, we present a high-performance, flexible nanogenerator using anisotropic BaTiO3 (BTO) nanocrystals synthesized on an M13 viral template through the genetically programmed self-assembly of metal ion precursors. The filamentous viral template realizes the formation of a highly entangled, well-dispersed network of anisotropic BTO nanostructures with high crystallinity and piezoelectricity. Even without the use of additional structural stabilizers, our virus-enabled flexible nanogenerator exhibits a high electrical output up to ∼300 nA and ∼6 V, indicating the importance of nanoscale structures for device performances. This study shows the biotemplating approach as a facile method to design and fabricate nanoscale materials particularly suitable for flexible energy harvesting applications.

Self-powered fully-flexible light-emitting system enabled by flexible energy harvester

Energy-harvesting technology utilising mechanical energy sources is a promising approach for the sustainable, independent, and permanent operation of a variety of flexible electronics. A new concept of a fully-flexible light-emitting system, self-powered by a high-performance piezoelectric thin-film energy harvester has been first established by manipulating highly-robust, flexible, vertically structured light emitting diodes (f-VLEDs). The f-VLEDs fabricated by anisotropic conductive film bonding and entire wafer etching show stable and durable performances during periodic mechanical deformations. A high-output energy harvester capable of generating up to 140 V and 10 μA can be fabricated via laser lift-off (LLO) process widely used in industries, in a safe and robust manner. In particular, this LLO process is of great benefit for the fabrication of mechanically stable, flexible piezoelectric devices, without causing any degradation of piezoelectric properties. In this process, self-powered all-flexible electronic system with light emittance can be spontaneously achieved by the electricity produced from flexible thin-film generator by applying slight biomechanical energy without any externally applied energy storage. This conceptual technology of self-powering based on the conversion of mechanical energy to electrical energy can open a facile and robust avenue for diverse, self-powered, bio-implantable applications, as well as commercial display applications.

Flexible Crossbar‐Structured Resistive Memory Arrays on Plastic Substrates via Inorganic‐Based Laser Lift‐Off

Crossbar-structured memory comprising 32 × 32 arrays with one selector-one resistor (1S-1R) components are initially fabricated on a rigid substrate. They are transferred without mechanical damage via an inorganic-based laser lift-off (ILLO) process as a result of laser-material interaction. Addressing tests of the transferred memory arrays are successfully performed to verify mitigation of cross-talk on a plastic substrate.

Reliable Control of Filament Formation in Resistive Memories by Self-Assembled Nanoinsulators Derived from a Block Copolymer

Resistive random access memory (ReRAM) is a promising candidate for future nonvolatile memories. Resistive switching in a metal-insulator-metal structure is generally assumed to be caused by the formation/rupture of nanoscale conductive filaments (CFs) under an applied electric field. The critical issue of ReRAM for practical memory applications, however, is insufficient repeatability of the operating voltage and resistance ratio. Here, we present an innovative approach to reliably and reproducibly control the CF growth in unipolar NiO resistive memory by exploiting uniform formation of insulating SiOx nanostructures from the self-assembly of a Si-containing block copolymer. In this way, the standard deviation (SD) of set and reset voltages was markedly reduced by 76.9% and 59.4%, respectively. The SD of high resistance state also decreased significantly, from 6.3 × 10(7) Ω to 5.4 × 10(4) Ω. Moreover, we report direct observations of localized metallic Ni CF formation and their controllable growth using electron microscopy and discuss electrothermal simulation results based on the finite element method supporting our analysis results.

Flexible highly-effective energy harvester via crystallographic and computational control of nanointerfacial morphotropic piezoelectric thin film

Controlling the properties of piezoelectric thin films is a key aspect for designing highly efficient flexible electromechanical devices. In this study, the crystallographic phenomena of PbZr1–xTixO3 (PZT) thin films caused by distinguished interfacial effects are deeply investigated by overlooking views, including not only an experimental demonstration but also ab initio modeling. The polymorphic phase balance and crystallinity, as well as the crystal orientation of PZT thin films at the morphotropic phase boundary (MPB), can be stably modulated using interfacial crystal structures. Here, interactions with MgO stabilize the PZT crystallographic system well and induce the texturing influences, while the PZT film remains quasi-stable on a conventional Al2O3 wafer. On the basis of this fundamental understanding, a high-output flexible energy harvester is developed using the controlled-PZT system, which shows significantly higher performance than the unmodified PZT generator. The voltage, current, and power densities are improved by 556%, 503%, and 822%, respectively, in comparison with the previous flexional single-crystalline piezoelectric device. Finally, the improved flexible generator is applied to harvest tiny vibrational energy from a real traffic system, and it is used to operate a commercial electronic unit. These results clearly indicate that atomic-scale designs can produce significant impacts on macroscopic applications.