Geon-Tae Hwang

Piezoelectric BaTiO3 Thin Film Nanogenerator on Plastic Substrates

The piezoelectric generation of perovskite BaTiO3 thin films on a flexible substrate has been applied to convert mechanical energy to electrical energy for the first time. Ferroelectric BaTiO3 thin films were deposited by radio frequency magnetron sputtering on a Pt/Ti/SiO2/(100) Si substrate and poled under an electric field of 100 kV/cm. The metal-insulator (BaTiO3)-metal-structured ribbons were successfully transferred onto a flexible substrate and connected by interdigitated electrodes. When periodically deformed by a bending stage, a flexible BaTiO3 nanogenerator can generate an output voltage of up to 1.0 V. The fabricated nanogenerator produced an output current density of 0.19 μA/cm(2) and a power density of ∼7 mW/cm(3). The results show that a nanogenerator can be used to power flexible displays by means of mechanical agitations for future touchable display technologies.

Flexible Nanocomposite Generator Made of BaTiO 3 Nanoparticles and Graphitic Carbons

Outdoor renewable energy sources such as solar energy (15 000 μ W/cm 3 ), [ 3 , 4 ] wind energy (380 μ W/cm 3 ), [ 5 ] and wave energy (1 000 W/cm of wave crest length) [ 6 , 7 ] can provide largescale needs of power. However, for driving small electronics in indoor or concealed environments [ 3 , 8 ] (such as in tunnels, clothes, and artifi cial skin) and implantable biomedical devices, innovative approaches have to be developed. One way of energy harvesting without such restraints is to utilize piezoelectric materials that can convert vibrational and mechanical energy sources from human activities such as pressure, bending, and stretching motions into electrical energy. [ 9–11 ]

Highly‐Efficient, Flexible Piezoelectric PZT Thin Film Nanogenerator on Plastic Substrates

A highly-efficient, flexible piezoelectric PZT thin film nanogenerator is demonstrated using a laser lift-off (LLO) process. The PZT thin film nanogenerator harvests the highest output performance of ∼200 V and ∼150 μA·cm(-2) from regular bending motions. Furthermore, power sources generated from a PZT thin film nanogenerator, driven by slight human finger bending motions, successfully operate over 100 LEDs.

A Hyper‐Stretchable Elastic‐Composite Energy Harvester

C. K. Jeong, G.-T. Hwang, D. Y. Park, J. H. Park, Dr. M. Byun, Prof. K. J. Lee Department of Materials Science and Engineering Korea Advanced Institute of Science and Technology (KAIST) 291 Daehak-ro , Yuseong-gu , Daejeon 305-701 , South Korea E-mail: keonlee@kaist.ac.kr Dr. J. Lee, Dr. S. Han, Prof. S. H. Ko Department of Mechanical Engineering Seoul National University 1 Gwanak-ro , Gwanak-gu , Seoul 151-742 , South Korea E-mail: maxko@snu.ac.kr Dr. J. Lee, Prof. S. S. Lee Department of Mechanical Engineering Korea Advanced Institute of Science and Technology (KAIST) 291 Daehak-ro , Yuseong-gu , Daejeon 305-701 , South Korea Dr. J. Ryu Functional Ceramic Group Korea Institute of Materials Science (KIMS) 797 Changwon-daero Seongsan-gu Changwon , Gyeongsangnam-do 642–831 , South Korea

Topographically-designed triboelectric nanogenerator via block copolymer self-assembly.

Herein, we report a facile and robust route to nanoscale tunable triboelectric energy harvesters realized by the formation of highly functional and controllable nanostructures via block copolymer (BCP) self-assembly. Our strategy is based on the incorporation of various silica nanostructures derived from the self-assembly of BCPs to enhance the characteristics of triboelectric nanogenerators (TENGs) by modulating the contact-surface area and the frictional force. Our simulation data also confirm that the nanoarchitectured morphologies are effective for triboelectric generation.

Virus-Directed Design of a Flexible BaTiO3 Nanogenerator

Biotemplated synthesis of functional nanomaterials has received increasing attention for applications in energy, catalysis, bioimaging, and other technologies. This approach is justified by the unique abilities of biological systems to guide sophisticated assembly and organization of molecules and materials into distinctive nanoscale morphologies that exhibit physicochemical properties highly desirable for specific purposes. Here, we present a high-performance, flexible nanogenerator using anisotropic BaTiO3 (BTO) nanocrystals synthesized on an M13 viral template through the genetically programmed self-assembly of metal ion precursors. The filamentous viral template realizes the formation of a highly entangled, well-dispersed network of anisotropic BTO nanostructures with high crystallinity and piezoelectricity. Even without the use of additional structural stabilizers, our virus-enabled flexible nanogenerator exhibits a high electrical output up to ∼300 nA and ∼6 V, indicating the importance of nanoscale structures for device performances. This study shows the biotemplating approach as a facile method to design and fabricate nanoscale materials particularly suitable for flexible energy harvesting applications.

Flexible Piezoelectric Thin-Film Energy Harvesters and Nanosensors for Biomedical Applications

The use of inorganic-based flexible piezoelectric thin films for biomedical applications has been actively reported due to their advantages of highly piezoelectric, pliable, slim, lightweight, and biocompatible properties. The piezoelectric thin films on plastic substrates can convert ambient mechanical energy into electric signals, even responding to tiny movements on corrugated surfaces of internal organs and nanoscale biomechanical vibrations caused by acoustic waves. These inherent properties of flexible piezoelectric thin films enable to develop not only self-powered energy harvesters for eliminating batteries of bio-implantable medical devices but also sensitive nanosensors for in vivo diagnosis/therapy systems. This paper provides recent progresses of flexible piezoelectric thin-film harvesters and nanosensors for use in biomedical fields. First, developments of flexible piezoelectric energy-harvesting devices by using high-quality perovskite thin film and innovative flexible fabrication processes are addressed. Second, their biomedical applications are investigated, including self-powered cardiac pacemaker, acoustic nanosensor for biomimetic artificial hair cells, in vivo energy harvester driven by organ movements, and mechanical sensor for detecting nanoscale cellular deflections. At the end, future perspective of a self-powered flexible biomedical system is also briefly discussed with relation to the latest advancements of flexible electronics.

Multicomponent Nanopatterns by Directed Block Copolymer Self-Assembly

Complex nanopatterns integrating diverse nanocomponents are crucial requirements for advanced photonics and electronics. Currently, such multicomponent nanopatterns are principally created by colloidal nanoparticle assembly, where large-area processing of highly ordered nanostructures raises significant challenge. We present multicomponent nanopatterns enabled by block copolymer (BCP) self-assembly, which offers device oriented sub-10-nm scale nanopatterns with arbitrary large-area scalability. In this approach, BCP nanopatterns direct the nanoscale lateral ordering of the overlaid second level BCP nanopatterns to create the superimposed multicomponent nanopatterns incorporating nanowires and nanodots. This approach introduces diverse chemical composition of metallic elements including Au, Pt, Fe, Pd, and Co into sub-10-nm scale nanopatterns. As immediate applications of multicomponent nanopatterns, we demonstrate multilevel charge-trap memory device with Pt-Au binary nanodot pattern and synergistic plasmonic properties of Au nanowire-Pt nanodot pattern.

Self-powered deep brain stimulation via a flexible PIMNT energy harvester

Deep brain stimulation (DBS) is widely used for neural prosthetics and brain–computer interfacing. Thus far in vivo implantation of a battery has been a prerequisite to supply the necessary power. Although flexible energy harvesters have recently emerged as alternatives to batteries, they generate insufficient energy for operating brain stimulation. Herein, we report a high performance flexible piezoelectric energy harvester by enabling self-powered DBS in mice. This device adopts an indium modified crystalline Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 (PIMNT) thin film on a plastic substrate to transform tiny mechanical motions to electricity. With slight bending, it generates an extremely high current reaching 0.57 mA, which satisfies the high threshold current for real-time DBS of the motor cortex and thereby could efficiently induce forearm movements in mice. The PIMNT based flexible energy harvester could open a new avenue for future in vivo healthcare technology using self-powered biomedical devices.

In Vivo Silicon-Based Flexible Radio Frequency Integrated Circuits Monolithically Encapsulated with Biocompatible Liquid Crystal Polymers

Biointegrated electronics have been investigated for various healthcare applications which can introduce biomedical systems into the human body. Silicon-based semiconductors perform significant roles of nerve stimulation, signal analysis, and wireless communication in implantable electronics. However, the current large-scale integration (LSI) chips have limitations in in vivo devices due to their rigid and bulky properties. This paper describes in vivo ultrathin silicon-based liquid crystal polymer (LCP) monolithically encapsulated flexible radio frequency integrated circuits (RFICs) for medical wireless communication. The mechanical stability of the LCP encapsulation is supported by finite element analysis simulation. In vivo electrical reliability and bioaffinity of the LCP monoencapsulated RFIC devices are confirmed in rats. In vitro accelerated soak tests are performed with Arrhenius method to estimate the lifetime of LCP monoencapsulated RFICs in a live body. The work could provide an approach to flexible LSI in biointegrated electronics such as an artificial retina and wireless body sensor networks.