L.J.M. van de Ven
Eindhoven University of Technology
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by L.J.M. van de Ven.
Journal of Colloid and Interface Science | 1986
J.W. de Haan; Hm van den Bogaert; J.J Ponjeé; L.J.M. van de Ven
Silica gel and Cab-O-Sil were chemically modified (silylated) with 3-aminopropyltriethoxysilane and 3-methacryloxypropyltrimethoxysilane under carefully controlled conditions. Subsequently the products were investigated by elemental analysis, Fourier transform IR spectroscopy, and 13C and 29Si cross-polarization magic angle spinning NMR (CP-MAS NMR). The influence of the reaction conditions of the silylation and the effect of subsequent heat treatment and water addition were studied. The resulting differences shed new light on the combined effects of reaction conditions and silica surface structures on the course of the reactions. Some assignments of 29Si NMR signals to specific structures were confirmed, while in one case a reassignment was proposed.
Journal of Non-crystalline Solids | 1989
P.W.J.G. Wijnen; Theo P. M. Beelen; J.W. de Haan; C.P.J. Rummens; L.J.M. van de Ven; R.A. van Santen
The rate of silica gel dissolution in aqueous alkaline media was investigated using 29Si nuclear magnetic resonance spectroscopy. A profound difference of alkali metal hydroxides on the dissolution rate of amorphous silica gel was observed. The dissolution rate increases in order LiOH ≈ CsaOH) < (RbOH ≈ NaOH) < KOH, as was confirmed by the β = silicomolybdate complexation method. Silica gel dissolution involved formation of monomeric silicic acid, Q0. The monomeric anions oligomerise into dimer species, which in turn form cyclic and lineartrimer species. The structure of highly polymerised silicate species depends on the alkali metal cation, i.e. low pH silicate solutions have structurally different silicate species as a function of alkali metal hydroxide, as is shown by 29Si-NMR spectroscopy. Potassium cations gave rise to more polymerised silica species compared with other alkali metal cations studied. On the contrary, when lithium hydroxide and silica gel are mixed in a molar SiO2/Li2O = 1:1, a microcrystalline phase is formed which consists of lithium silicate crystals. Crystallisation of the lithium silicate proceeds via monomeric silica being in solution.
Colloids and Surfaces | 1990
P.W.J.G. Wijnen; Theo P. M. Beelen; J.W. de Haan; L.J.M. van de Ven; R.A. van Santen
Abstract Studies of the dissolution of amorphous silica gel in aqueous hydroxides by 29 Si-MAS-NMR, give information on the oligomerisation of dissolved monomeric silicic acid and on the interaction between cations and the silica gel surface. The dissolution rate increases in the order (LIOH ≈ CsOH)
Journal of Chromatography A | 1988
Henk A. Claessens; J.W. de Haan; L.J.M. van de Ven; P.C. de Bruyn; C.A.M.G. Cramers
A number of long and short chain reversed-phase packings for high-performance liquid chromatography from two different silica substrates, derivatized with mono- or trifunctional silane reagents, were studied under simulated routine conditions. The changes in the properties of the packings are described in terms of loss of silanes, gain in silanol content and rearrangements of the silica-to-silane bondings. Chromatographic techniques, solid-state NMR spectroscopy and elemental analyses were used to characterize and partially to quantify these changes. As expected, long chain phases are more stable than short chain phases with the same silane-to-silica attachment. More surprisingly, the reversed phases derived from monofunctional silanes are much more stable than phases with the same silanes chain length prepared from trifunctional silanes. An explanation of the changes is offered in terms of siloxane hydrolysis and rearrangement plus concomitant polymerization of multifunctional silanes. The impact on the chromatographic behaviour is discussed.
Catalysis Letters | 1996
Jj Janchen; J.H.M.C. van Wolput; L.J.M. van de Ven; J.W. de Haan; R.A. van Santen
The influence of the Si/Al ratio, of the nature of the T-atom and of the pore size on the acidic strength of Brønsted sites in zeolites has been investigated using changes of the vibrational properties of Brønsted OH(OD) groups and a shift change of Brønsted protons in nuclear magnetic resonance upon adsorption of weak bases. Deuterated acetonitrile and trichloro-acetonitrile have been chosen to probe the acidic strengths of ZSM-5, FeZSM-5, mordenite and zeolite Y, which are often used as catalysts. From the results of the FTIR and 1 H MAS NMR studies it can be concluded that the chemical composition of the lattice dominates the acidic strength of the Brønsted sites in zeolites. Differences in structure or pore size play a much smaller role.
Polymer | 1989
P.H.T. Vollenberg; J.W. de Haan; L.J.M. van de Ven; Derk D Heikens
Experimental results are reported from which it appears that in the case of polymer filled with silane-treated glass beads the Youngs modulus is, in accordance with present theory, independent of the particle size of the filler. However, if pure glass beads are used as filler, the Youngs modulus appears to be significantly dependent on the particle size. In a previous report a hypothetical explanation was given for this behaviour. It was assumed that, owing to the free filler surface offered to the polymer in the case of the untreated glass beads, the morphology of the polymer matrix adjacent to the filler particles is different from that of the bulk of the material. The results of annealing and solid-state nuclear magnetic resonance experiments reported here appear to support this hypothesis.
Journal of Chromatography A | 1989
M.J.J. Hetem; L.J.M. van de Ven; J.W. de Haan; C.A.M.G. Cramers; Klaus Albert; Ernst Bayer
Two different types of silica substrates uniformly modified with reversed-phase high-performance liquid chromatographic (RP-HPLC) phases obtained with mono-, di- and trifunctional octadecylsilanes were subjected to artificial ageing under simulated routine conditions and were subsequently analysed and evaluated. Changes in the properties of the bonded phase packings were characterized and quantified with chromatographic techniques, solid-state NMR and elemental analysis. These changes were correlated with selectivity, loss of silanes, gain in silanol content and rearrangement of the silica to silane bonding. When eluents of extremely high pH were used, the multifunctional octadecylsilane stationary phases showed a higher resistance towards ligand stripping. The substrate shielding of difunctional octadecylsilanes showed superior characteristics due to direct surface attachments. The rigidity of the silica substrate used for modification influences the stability of the RP-HPLC phases, especially for the monofunctionally modified octadecylsilane stationary phase. With the use of multifunctional C18 silanes for modification, the influence of the characteristics of the substrate on the stability of the RP-HPLC phases was reduced compared with monofunctional C18. In contrast to monofunctionally modified phases, the polar selectivity of the multifunctionally modified phases remained more or less constant after intensive use with aggressive eluents. A chromatographic characterization method for obtaining information about the stability, capacity, selectivity and silica degradation of different RP-HPLC stationary phases is also presented.
Chemical Physics Letters | 1991
A.P.M. Kentgens; C.R. Bayense; J.H.C. van Hooff; J.W. de Haan; L.J.M. van de Ven
69Ga and 71Ga magic-angle-spinning (MAS) NMR spectra of a series of gallium analogue zeolites H—(Ga)ZSM-5, with varying Si/Ga ratios, were obtained at 14.1 and 7.1 T. The quadrupole coupling constant e2qQ/h was deduced from the shift difference of the centre of gravity of the 69Ga and 71Ga resonance. An analysis of the linewidth as a function of the magnetic field shows that the width is not only determined by the second-order quadrupolar broadening, but also by a distribution of chemical shifts. The values obtained for the quadrupole coupling constant and chemical shift distribution are compared to those found for 27Al in H—(Al)ZSM-5. It is argued that the observed differences are related to the different NMR properties of the isotopes, and do not point to any structural changes of the ZSM-5 lattice.
Colloids and Surfaces A: Physicochemical and Engineering Aspects | 1993
M.P.J. Peeters; L.J.M. van de Ven; J.W. de Haan; J.H.C. van Hooff
Abstract A1PO-5 and A1PO-11 containing cobalt were studied by diffuse reflectance electronic absorption spectroscopy in combination with 31 P NMR. Quantitative 31 P NMR and relaxation measurements (Carr—Purcell—Gill—Meiboom procedure) were performed on calcined samples with increasing amounts of paramagnetic cobalt on lattice positions. The isomorphous substitution of aluminium by cobalt leads to NMR-invisible phosphorus (up to 30%); at least the first and third sphere (P) have to become NMR invisible to explain the observed losses for the lowest cobalt loadings. The amount of undetectable phosphorus, however, does not increase proportionally to the cobalt content, suggesting clustering of cobalt on lattice positions, as previously reported for CoAPO-50. The 31 P T 2 relaxation behaviour of NMR-detectable phosphorus is also influenced by framework cobalt. The measured T 2 decays were fitted with a biexponential Lorentzian function. Both the T 2 values, as well as the relative contributions, change with increasing amounts of lattice cobalt. Impregnated samples (containing extralattice cobalt) behave essentially like normal aluminophosphates. This is probably due to the poor dispersion of cobalt throughout the crystal in the impregnated samples.
Chromatographia | 1985
Henk A. Claessens; C.A.M.G. Cramers; J.W. de Haan; F.A.H. den Otter; L.J.M. van de Ven; P.J. Andree; G.J. de Jong; N. Lammers; J. Wijma; J. Zeeman
SummaryLaboratory use of HPLC columns packed with C8 and C18 bonded phases leads to changes in selectivities and retention volumes. FTIR,1H NMR of hydrolysed bonded phases and solid state13C- and29Si NMR were applied to characterize the materials. The results of the various techniques are in fair agreement except solid state NMR. Loss of silane and hydrolysis of surface siloxane groups have been observed for the C8 bondes phase, while for the C18 material the latter process seems to dominate. The solid state NMR results have been tentatively explained in terms of changing chain arrangements and mobilities.