Lars Regnér

Ceramic coating improves tibial component fixation in total knee arthroplasty

Forty uncemented total knee arthroplasties (36 patients) were randomly allocated to a Miller-Galante II prosthesis with or without hydroxyapatite/tricalcium phosphate (HA/TCP) coating on the titanium fiber mesh on the undersurface of the tibial component. The patients were followed for 2 years with repeated radiostereometric examinations. After 2 years, the HA/TCP tibial components displayed smaller anterior-posterior tilt and less subsidence. The mean value of maximal total point motion was small: 0.5 mm in both groups. At 24 months, there were more radiolucent lines under the tibial tray and around the stem in the uncoated group, but the clinical results did not differ. HA/TCP coating on the undersurface of the tibial component improved the stability and seemed to improve the quality of the interface between the tibial component and the bone.

All-polyethylene vs. metal-backed tibial component in total knee arthroplasty—a randomized RSA study comparing early fixation of horizontally and completely cemented tibial components: Part 2. Completely cemented components: MB not superior to AP components

Background Uncertainty exists as to whether metal backing (MB) of the tibial component is better than an all-polyethylene component (AP). This is valid for both horizontally and completely cemented components. We evaluated completely cemented MB vs. AP (Part 2). Patients and methods In a randomized study, 39 patients (40 knees) with knee arthrosis were operated with cemented low-conforming total knee arthroplasty (AGC, Biomet) with a tibial component of uniform thickness (8 mm), cemented both beneath the tibial tray and around the stem. 20 patients had an all-polyethylene (AP) tibial component and 20 patients had an identical but metal-backed (MB) tibial component. We used clinical examination and radiostereometric analysis (RSA) to evaluate the hypothesis that MB improves component fixation. Fixation was evaluated using RSA up to 2 years after surgery. Clinical assessment was performed preoperatively and after 2 years using the Hospital for Special Surgeons (HSS) score. Results We found no differences in micromotion, and no differences in clinical scores could be detected between the groups at any time point. Interpretation Our findings indicate that there was equal initial fixation of the AP and MB stemmed monobloc components when they were cemented beneath the tibial plateau and around the stem.   ▪

Bone mineral and migratory patterns in uncemented total knee arthroplasties: a randomized 5-year follow-up study of 38 knees.

We measured the amount of bone mineral in the medial tibial condyle 1 week postoperatively, after 1 year and after 4-5 years in 38 arthrotic knees randomized to a Freeman-Samuelson hydroxyapatite-coated (FS HA) or a Miller-Galante II (MG II) total knee arthroplasty. Clinically excellent results were recorded in both groups after 5 years. At the last follow-up, the overall decrease in bone mineral was 26%, as measured by triple-energy X-ray absorptiometry. The decrease was larger in FS HA knees than in MG II knees after 4-5 years, indicating stress-shielding of the proximal tibia. Radiostereometry at 1 and 5 years showed smaller maximum total point motion, maximum subsidence and varus or valgus tilt in the FS HA group. There was a tendency towards a reversed relationship between subsidence and change in bone mineral after 1 year, but not after 4-5 years. Distal fixation of the stem in the Freeman-Samuelson hydroxyapatite-coated (FS HA) components might explain the more pronounced loss of bone mineral in the medial tibial condyle.

Kinematics of three variations of the Freeman-Samuelson total knee prosthesis.

The effect of changes in the articulating surfaces on the kinematics of the Freeman-Samuelson total knee replacement was evaluated. Twenty-two patients (22 knees) (median age, 69 years) were randomized to a standard design with a fixed polyethylene bearing, a design with a mobile bearing, or a new design with a spherical medial femoral condyle with a fixed bearing. The patients were studied with radiostereometry and film-exchangers at 0° nonweightbearing and during active weightbearing extension from 45° to 15°. The center of the tibial tray with a mobile-bearing prosthesis occupied a more anterior position than observed in the designs with a fixed bearing. The medial femoral condyle center had a more posterior position in the standard design than in the design with a spherical medial condyle. From a distally displaced position at 45°, the medial condylar center displaced a mean of 1.8 mm proximally during extension in the standard design and had a constant position in the meniscal design. In the spherical design the medial condyle was displaced proximally at 45° and displaced a mean of 1.6 mm distally during extension. The reduced anteroposterior and proximodistal translations in the meniscal design are compatible with improved congruency between the components. The design with a spherical medial condyle stabilized anteroposterior motions, but showed more pronounced proximodistal displacement medially than did the other two designs.

All-polyethylene vs. metal-backed tibial component in total knee arthroplasty-a randomized RSA study comparing early fixation of horizontally and completely cemented tibial components: part 1. Horizontally cemented components: AP better fixated than MB.

Background Controversy still exists as to whether to mount the tibial bearing on a metal baseplate or not. Furthermore, the tibial component can be either horizontally or completely cemented. We evaluated metal backing versus all-polyethylene using horizontal cementing technique. Patients and methods We randomized 40 patients with knee arthrosis (40 knees) to 2 groups: cemented total knee arthroplasty (AGC, Biomet) using either all-polyethylene (AP) or metal-backed (MB) tibial compo-nents (n = 20 for each group). All tibial implants had a total thickness of 8 mm. We used proximal cement-ing, including only the horizontal part of the tibia with avoidance of the stem-bone interface. Results The positioning of the implants, as judged by the HKA angle, showed an average neutral alignment in both groups. Preoperatively and after 2 years, there was no statistically significant difference between the HSS scores in both groups (p = 0.6 and 0.4). After 2 years, the metal-backed components had rotated more around the longitudinal axis, median 0.5° vs. 0.2° (internal or exter-nal rotation, p = 0.002), and showed increased maximum total point motion, median 1.0 vs. 0.4 mm (maximum migration or MTPM, p = 0.003). Interpretation Our study indicates that better fixation can be obtained with the all-polyethylene design if proximally cemented thin components are used.   ▪

Stepwise introduction of a bone-conserving osseointegrated hip arthroplasty using RSA and a randomized study: II. Clinical proof of concept—40 patients followed for 2 years

Background We have developed a bone-conserving commercially pure titanium hip replacement system using osseointegration principles: a metaphyseal loading proximal femoral component affixing into the retained neck and metaphysis only, leaving the femoral canal untouched. The acetabular cup closely fits a dual-geometry cavity, avoiding stress protection at the dome. Patients and methods After extensive laboratory and clinical pilot trial investigations, the surface-engineered implants were submitted to a prospective randomized controlled clinical trial involving 40 patients (40 hips), in which they were compared to the cemented Spectron femoral component and cementless Trilogy cup as control implant. The following clinical measures were used to monitor progress at regular intervals for the first 2 postoperative years: radiostereometric analysis (RSA), Harris Hip Score, pain score, WOMAC, and SF-36. Results After 2 years of follow-up, no statistically significant differences were seen between the groups concerning rotation or translation along the cardinal axes. The patients receiving the Gothenburg osseointegrated titanium (GOT) system had significantly higher Harris Hip Score at 6 months, suggesting more rapid recovery. WOMAC, SF-36 and pain analysis were similar for the first 2 postoperative years. Interpretation Our RSA data suggest that osseointegration was achieved for all patients receiving the GOT hip system. This bone-conserving prosthesis may provide a good alternative, especially for young and active patients.

Stepwise introduction of a bone-conserving osseointegrated hip arthroplasty using RSA and a randomized study: I. Preliminary investigations—52 patients followed for 3 years

Background We developed a total hip system using osseointegration guidelines, a metaphyseal-loading proximal femoral replacement in the retained neck and a dual-geometry titanium shell in the acetabulum. Patients and methods A randomized controlled clinical trial was undertaken in 52 patients (53 hips), using the cemented Spectron stem and cementless Harris-Galante II cup as control implants (24 patients in experimental group, 29 control patients). Clinical measures of Harris Hip Score (HHS), pain score and radiostereometric analysis (RSA) at regular intervals for up to three years were used to monitor progress. Results No statistically significant differences were found in HHS and pain score; the stability of the cementless experimental implant was also comparable to that of the cemented controls by RSA. 3 revisions were required for migration in the experimental group and 1 was required for component dislocation in the control group. Interpretation Our findings indicate the practicality of osseointegration of titanium implants, but suggest that current performance is inadequate for clinical introduction. However, the stable fixation achieved in the retained neck in the majority of patients is indicative of osseointegration. This finding will encourage technical and design improvements for enhancement of clinical osseointegration and should also encourage further study. Periprosthetic osteolysis might be avoided by the establishment and maintenance of direct implant-bone connection: “osseointegration”.

Clinical and radiologic survivorship of cementless tibial components fixed with finned polyethylene pegs.

One hundred twenty patients (22 men, 98 women; 144 knees) with uncemented Freeman-Samuelson total knee arthroplasty were followed prospectively. Eighty-one patients had rheumatoid arthritis and 39 patients had osteoarthrosis. The mean follow-up period was 6.8 years. Three different types of tibial components were used: a high-density polyethylene component without stem, a metal-backed tibial component without stem, and a metal-backed tibial component with stem. Progressive varus tilting turned out to be an early sign of failure and occurred in 22% of the tibial components. Revision of the tibial component was done in 17 knees. Survival analysis with revision as endpoint revealed a survival rate of 79% at a follow-up period of 10 years. Cementless fixation of this design using macrointerlocking pegs and no other stabilization resulted in poor fixation and a high revision rate and cannot be recommended.