Laura Piveteau

High-performance thermoelectric nanocomposites from nanocrystal building blocks

The efficient conversion between thermal and electrical energy by means of durable, silent and scalable solid-state thermoelectric devices has been a long standing goal. While nanocrystalline materials have already led to substantially higher thermoelectric efficiencies, further improvements are expected to arise from precise chemical engineering of nanoscale building blocks and interfaces. Here we present a simple and versatile bottom–up strategy based on the assembly of colloidal nanocrystals to produce consolidated yet nanostructured thermoelectric materials. In the case study on the PbS–Ag system, Ag nanodomains not only contribute to block phonon propagation, but also provide electrons to the PbS host semiconductor and reduce the PbS intergrain energy barriers for charge transport. Thus, PbS–Ag nanocomposites exhibit reduced thermal conductivities and higher charge carrier concentrations and mobilities than PbS nanomaterial. Such improvements of the material transport properties provide thermoelectric figures of merit up to 1.7 at 850 K.

Structure of Colloidal Quantum Dots from Dynamic Nuclear Polarization Surface Enhanced NMR Spectroscopy

Understanding the chemistry of colloidal quantum dots (QDs) is primarily hampered by the lack of analytical methods to selectively and discriminately probe the QD core, QD surface and capping ligands. Here, we present a general concept for studying a broad range of QDs such as CdSe, CdTe, InP, PbSe, PbTe, CsPbBr3, etc., capped with both organic and inorganic surface capping ligands, through dynamic nuclear polarization (DNP) surface enhanced NMR spectroscopy. DNP can enhance NMR signals by factors of 10-100, thereby reducing the measurement times by 2-4 orders of magnitude. 1D DNP enhanced spectra acquired in this way are shown to clearly distinguish QD surface atoms from those of the QD core, and environmental effects such as oxidation. Furthermore, 2D NMR correlation experiments, which were previously inconceivable for QD surfaces, are demonstrated to be readily performed with DNP and provide the bonding motifs between the QD surfaces and the capping ligands.

Increasing photon absorption and stability of PbS quantum dot solar cells using a ZnO interlayer

We compared PbS quantum dot (QD) solar cells with different cathode interlayer materials, namely, LiF and ZnO nanoparticles, using the same device structure. Solar cells fabricated with the ZnO interlayer gave a power conversion efficiency of 4.8%, which is higher (above the experimental variation) than the 4.1% efficiency obtained with a LiF interlayer. We found that the ZnO interlayer alters the spatial distribution of the optical field, leading to an increase in external quantum efficiency in the visible range. Furthermore, devices with ZnO as interlayer showed more stable performance than the ones using LiF, with practically no power conversion efficiency degradation after 1 month inside a N2 glovebox.

Host–guest chemistry for tuning colloidal solubility, self-organization and photoconductivity of inorganic-capped nanocrystals

Colloidal inorganic nanocrystals (NCs), functionalized with inorganic capping ligands, such as metal chalcogenide complexes (MCCs), have recently emerged as versatile optoelectronic materials. As-prepared, highly charged MCC-capped NCs are dispersible only in highly polar solvents, and lack the ability to form long-range ordered NC superlattices. Here we report a simple and general methodology, based on host–guest coordination of MCC-capped NCs with macrocyclic ethers (crown ethers and cryptands), enabling the solubilization of inorganic-capped NCs in solvents of any polarity and improving the ability to form NC superlattices. The corona of organic molecules can also serve as a convenient knob for the fine adjustment of charge transport and photoconductivity in films of NCs. In particular, high-infrared-photon detectivities of up to 3.3 × 1011 Jones with a fast response (3 dB cut-off at 3 kHz) at the wavelength of 1,200 nm were obtained with films of PbS/K3AsS4/decyl-18-crown-6 NCs.

High-energy-density dual-ion battery for stationary storage of electricity using concentrated potassium fluorosulfonylimide

Graphite dual-ion batteries represent a potential battery concept for large-scale stationary storage of electricity, especially when constructed free of lithium and other chemical elements with limited natural reserves. Owing to their non-rocking-chair operation mechanism, however, the practical deployment of graphite dual-ion batteries is inherently limited by the need for large quantities of electrolyte solutions as reservoirs of all ions that are needed for complete charge and discharge of the electrodes. Thus far, lithium-free graphite dual-ion batteries have employed moderately concentrated electrolyte solutions (0.3–1 M), resulting in rather low cell-level energy densities of 20–70 Wh kg−1. In this work, we present a lithium-free graphite dual-ion battery utilizing a highly concentrated electrolyte solution of 5 M potassium bis(fluorosulfonyl)imide in alkyl carbonates. The resultant battery offers an energy density of 207 Wh kg−1, along with a high energy efficiency of 89% and an average discharge voltage of 4.7 V.Lithium-free graphite dual-ion battery offers a new means of energy storage. Here the authors show such device utilizing a highly concentrated electrolyte solution of KFSI in alkyl carbonates that exhibits a high energy density and high energy efficiency as well as an average discharge voltage of 4.7 V.

Resolving the Core and the Surface of CdSe Quantum Dots and Nanoplatelets Using Dynamic Nuclear Polarization Enhanced PASS–PIETA NMR Spectroscopy

Understanding the surface of semiconductor nanocrystals (NCs) prepared using colloidal methods is a long-standing goal of paramount importance for all their potential optoelectronic applications, which remains unsolved largely because of the lack of site-specific physical techniques. Here, we show that multidimensional 113Cd dynamic nuclear polarization (DNP) enhanced NMR spectroscopy allows the resolution of signals originating from different atomic and magnetic surroundings in the NC cores and at the surfaces. This enables the determination of the structural perfection, and differentiation between the surface and core atoms in all major forms of size- and shape-engineered CdSe NCs: irregularly faceted quantum dots (QDs) and atomically flat nanoplatelets, including both dominant polymorphs (zinc-blende and wurtzite) and their epitaxial nanoheterostructures (CdSe/CdS core/shell quantum dots and CdSe/CdS core/crown nanoplatelets), as well as magic-sized CdSe clusters. Assignments of the NMR signals to specific crystal facets of oleate-terminated ZB structured CdSe NCs are proposed. Significantly, we discover far greater atomistic complexity of the surface structure and the species distribution in wurtzite as compared to zinc-blende CdSe QDs, despite an apparently identical optical quality of both QD polymorphs.

Colloidal Bismuth Nanocrystals as a Model Anode Material for Rechargeable Mg-Ion Batteries: Atomistic and Mesoscale Insights.

At present, the technical progress of secondary batteries employing metallic magnesium as the anode material has been severely hindered due to the low oxidation stability of state-of-the-art Mg electrolytes, which cannot be used to explore high-voltage (>3 V versus Mg2+/Mg) cathode materials. All known electrolytes based on oxidatively stable solvents and salts, such as Mg(ClO4)2 and Mg bis(trifluoromethanesulfonimide), react with the metallic magnesium anode, forming a passivating layer at its surface and preventing the reversible plating and stripping of Mg. Therefore, in a near-term effort to extend the upper voltage limit in the exploration of future candidate Mg-ion battery cathode materials, bismuth anodes have attracted considerable attention due to their efficient magnesiation and demagnesiation alloying reaction in such electrolytes. In this context, we present colloidal Bi nanocrystals (NCs) as a model anode material for the exploration of cathode materials for rechargeable Mg-ion batteries. Bi NCs demonstrate a stable capacity of 325 mAh g-1 over at least 150 cycles at a current density of 770 mA g-1, which is among the most-stable performance of Mg-ion battery anode materials. First-principles crystal structure prediction methodologies and ex situ X-ray diffraction measurements reveal that the magnesiation of Bi NCs leads to the simultaneous formation of the low-temperature trigonal structure, α-Mg3Bi2, and the high-temperature cubic structure, β-Mg3Bi2, which sheds insight into the high stability of this reversible alloying reaction. Furthermore, small-angle X-ray scattering measurements indicate that although the monodispersed, crystalline nature of the Bi NCs is indeed disturbed during the first discharge step, no notable morphological or structural changes occur in the following electrochemical cycles. The cost-effective and facile synthesis of colloidal Bi NCs and their remarkably high electrochemical stability upon magnesiation make them an excellent model anode material with which to accelerate progress in the field of Mg-ion secondary batteries.

Correction to “Structure of Colloidal Quantum Dots from Dynamic Nuclear Polarization Surface Enhanced NMR Spectroscopy”

Page 13967. In the Results and Discussion sub-section “CdSe QDs”, the chemical shift of the core of CdSe oleate-capped QDs was incorrectly reported to be −20 ppm instead of the correct value of −60 ppm. The seventh sentence of the subsection should begin, “With DNP surface enhanced NMR, we observed a signal at −60 ppm from the QD core...”. This inadvertent error was repeated in the caption of Figure 4 on page 13968. These changes do not affect in any way the