Laurent Guy

Solid particles in an elastomer matrix: impact of colloid dispersion and polymer mobility modification on the mechanical properties

The reinforcement of elastomers by inorganic fillers, a concept of very high technological importance, is commonly understood to result from the presence of a mechanical network of partially aggregated filler particles. The non-linear mechanical properties, in particular the decrease of the modulus at high strain (Payne effect), are further interpreted to be a consequence of the breakdown of this filler network. There are, however, many open questions concerning the actual nature of the interparticle connections, where a modified polymer layer forming “glassy bridges” constitutes one possibility. In this work, we address this issue with a suitable silica-filled model elastomer, where we characterize the silica dispersion by SANS in combination with reverse Monte-Carlo modeling, and the mobility modification of the polymer by low-field proton NMR spectroscopy. In our samples, we identify a glassy layer as well as a region of intermediate mobility (possibly modified Rouse modes). Based on the structural information from SANS, we are able to quantify the amount of interparticle connections, and correlate it with the magnitude of the Payne effect taken from shear rheology. This works only if we assume that these connections comprise both, the glassy layer as well as the region of intermediate mobility. The amount of glassy immobilized polymer only does not suffice to explain the mechanical properties.

Particles in model filled rubber: Dispersion and mechanical properties

We have been able to design model filled rubbers with exactly the same chemical structure but different filler arrangements. From these model systems, we show that the particle arrangement in the elastomeric matrix controls the strain softening at small strain amplitude known as the Payne effect, as well as the elastic modulus dependence on the temperature. More precisely, we observed that the Payne effect disappears and the elastic modulus only weakly depends on the temperature when the particles are well separated. On the contrary, samples with the same interfacial physical chemistry but with aggregated particles show large amplitudes of the Payne effect and their elastic modulus decreases significantly with the temperature. We discuss these effects in terms of glassy bridge formation between filler particles. The observed effects provide evidence that glassy bridges play a key role on the mechanical properties of filled rubbers.

Fatigue crack growth dynamics in filled natural rubber

Abstract We present fatigue experiments performed on filled natural rubber and study the correlations between crack growth dynamics and fracture morphologies imprinted by an irregular crack path. Slow crack growth dynamics is obtained by cyclic fatigue in a pure shear test. We will show that an unstable crack growth regime exists for high loads. We will also discuss the appearance of sawtooth striations which follow a scenario that significantly differs from previous results reported in the literature.

Fatigue Behavior in Filled Natural Rubber: Study of the Mechanical Damage Dynamics

Rupture dynamics in reinforced elastomers is a much more complex process than in pure elastomers due to the intrinsic heterogeneous mixture of a rubber matrix with filler particles at submicronic scale. In the case of natural rubber, an additional source of heterogeneity is the strain-crystallization effect. How rupture dynamics and crack path are affected by filler particles and strain-crystallization is still a matter of debate. Actually, understanding how rupture dynamics and crack path are correlated to each other is probably an important key in order to improve long time resistance of reinforced rubbers.