Laurent Oxarango

Liquid and gas permeabilities of unsaturated municipal solid waste under compression

A novel set of experimental apparatus was designed and constructed to study the changes in the fluid-flow properties of municipal solid waste (MSW) related to the physical evolution of its structure under compression. The vertical liquid and gas permeabilities of MSW samples were measured in a laboratory-constructed cell termed an oedopermeameter. Another original device, a gas pycnometer, was employed to assess the volumetric gas content of the porous medium. Finally, the horizontal gas permeability of the compressed MSW sample was measured using another laboratory-constructed cell called a transmissivimeter. The results made it possible to characterise the intrinsic gas permeability as a function of porosity. Additionally, gas permeability measurements of samples with different liquid contents allowed the derivation of gas permeability correlations as functions of the physical parameters of the medium. A unique relationship was found between the gas permeability and the volumetric gas content.

Characterisation of the physico-mechanical parameters of MSW

Following the basics of soil mechanics, the physico-mechanical behaviour of municipal solid waste (MSW) can be defined through constitutive relationships which are expressed with respect to three physical parameters: the dry density, the porosity and the gravimetric liquid content. In order to take into account the complexity of MSW (grain size distribution and heterogeneity larger than for conventional soils), a special oedometer was designed to carry out laboratory experiments. This apparatus allowed a coupled measurement of physical parameters for MSW settlement under stress. The studied material was a typical sample of fresh MSW from a French landfill. The relevant physical parameters were measured using a gas pycnometer. Moreover, the compressibility of MSW was studied with respect to the initial gravimetric liquid content. Proposed methods to assess the set of three physical parameters allow a relevant understanding of the physico-mechanical behaviour of MSW under compression, specifically, the evolution of the limit liquid content. The present method can be extended to any type of MSW.

Alternative solutions for the bio-denitrification of landfill leachates using pine bark and compost

Nitrified leachate may still require an additional bio-denitrification step, which occurs with the addition of often-expensive chemicals as carbon source. This study explores the applicability of low-cost carbon sources such as garden refuse compost and pine bark for the denitrification of high strength landfill leachates. The overall objective is to assess efficiency, kinetics and performance of the substrates in the removal of high nitrate concentrations. Garden refuse and pine bark are currently disposed of in general waste landfills in South Africa, separated from the main waste stream. A secondary objective is to assess the feasibility of re-using green waste as by-product of an integrated waste management system. Denitrification processes in fixed bed reactors were simulated at laboratory scale using anaerobic batch tests and leaching columns packed with immature compost and pine bark. Biologically treated leachate from a Sequencing Batch Reactor (SBR) with nitrate concentrations of 350, 700 and 1100 mgN/l were used for the trials. Preliminary results suggest that, passed the acclimatization step (40 days for both substrates), full denitrification is achieved in 10-20 days for the pine bark and 30-40 days for the compost.

Effect of pine bark and compost on the biological denitrification process of non-hazardous landfill leachate: Focus on the microbiology

In an attempt to optimize the cost-efficiency of landfill leachate treatment by biological denitrification process, our study focused on finding low-cost alternatives to traditional expensive chemicals such as composted garden refuse and pine bark, which are both available in large amount in South African landfill sites. The overall objective was to assess the behaviour of the bacterial community in relation to each substrate while treating high strength landfill leachates. Denitrification processes in fixed bed reactors were simulated at laboratory scale using anaerobic batch tests with immature compost and pine bark. High strength leachate was simulated using a solution of water and nitrate at a concentration of 500 mg l(-1). Results suggest that pine bark released large amounts of phenolic compounds and hydroxylated benzene rings, which both can delay the acclimatization time and inhibit the biological denitrification (only 30% efficiency). Furthermore, presence of potential pathogens like Enterobacter and Pantoea agglomerans prevents the applicability of the pine bark in full-scale operations. On the other hand, lightly composted garden refuse (CGR) offered an adequate substrate for the formation of a biofilm necessary to complete the denitrification process (total nitrate removal observed within 7 days). CGR further contributed to a rapid establishment of an active consortium of denitrifiers including Acinetobacter, Rhizobium, Thermomonas, Rheinheimera, Phaeospirillum and Flavobacterium. Clearly the original composition, nature, carbon to nitrogen ratio (C/N) and degree of maturity and stability of the substrates play a key role in the denitrification process, impacting directly on the development of the bacterial population and, therefore, on the long-term removal efficiency.

Contribution of 3-D time-lapse ERT to the study of leachate recirculation in a landfill.

Leachate recirculation is a key process in the operation of municipal waste landfills as bioreactors. It aims at increasing the moisture content to optimise the biodegradation. Because waste is a very heterogeneous and anisotropic porous media, the geometry of the leachate plume recirculation is difficult to delineate from the surface at the scale of the bioreactor site. In this study, 3-D time-lapse electrical resistivity tomography (ERT) was used to obtain useful information for understanding leachate recirculation hydrodynamics. The ERT inversion methodology and the electrode arrays were optimised using numerical modelling simulating a 3-D leachate injection scenario. Time-lapse ERT was subsequently applied at the field scale during an experimental injection. We compared ERT images with injected volumes to evaluate the sensitivity of time-lapse ERT to delineate the plume migration. The results show that time-lapse ERT can accomplish the following: (i) accurately locate the injection plume, delineating its depth and lateral extension; (ii) be used to estimate some hydraulic properties of waste.

Long-term moisture measurements in large-scale bioreactor cells using TDR and neutron probes

This paper investigates the measurement of moisture content in municipal solid waste using two different indirect techniques: neutron scattering and time-domain reflectometry (TDR). Therefore, six laboratory-scale landfill bioreactors were instrumented with both neutron and TDR probes; in addition to that a gravimetric moisture balance was established for each cell. Different leachate recirculation modes were applied to perform different wetting conditions. In a first step, both probes were calibrated based on the water balance from three cells presenting homogeneous water distributions and sufficient temporal moisture variations. The calibration functions were then used for temporal and spatial moisture monitoring of all six cells. The results show that both methods are sensitive to moisture variations and provide interesting information on the complexity of vertical flows within the municipal solid waste. Nevertheless, it appears that neutron scattering offers better accuracy at the laboratory scale.

Understanding leachate flow in municipal solid waste landfills by combining time-lapse ERT and subsurface flow modelling – Part II: Constraint methodology of hydrodynamic models

Leachate recirculation is a key process in the operation of municipal solid waste landfills as bioreactors. To ensure optimal water content distribution, bioreactor operators need tools to design leachate injection systems. Prediction of leachate flow by subsurface flow modelling could provide useful information for the design of such systems. However, hydrodynamic models require additional data to constrain them and to assess hydrodynamic parameters. Electrical resistivity tomography (ERT) is a suitable method to study leachate infiltration at the landfill scale. It can provide spatially distributed information which is useful for constraining hydrodynamic models. However, this geophysical method does not allow ERT users to directly measure water content in waste. The MICS (multiple inversions and clustering strategy) methodology was proposed to delineate the infiltration area precisely during time-lapse ERT survey in order to avoid the use of empirical petrophysical relationships, which are not adapted to a heterogeneous medium such as waste. The infiltration shapes and hydrodynamic information extracted with MICS were used to constrain hydrodynamic models in assessing parameters. The constraint methodology developed in this paper was tested on two hydrodynamic models: an equilibrium model where, flow within the waste medium is estimated using a single continuum approach and a non-equilibrium model where flow is estimated using a dual continuum approach. The latter represents leachate flows into fractures. Finally, this methodology provides insight to identify the advantages and limitations of hydrodynamic models. Furthermore, we suggest an explanation for the large volume detected by MICS when a small volume of leachate is injected.

Experimental study of domestic waste material using magnetic resonance measurements

In this paper, we present results of a laboratory and in situ study of a domestic waste landfill using magnetic resonance measurements. For our study, we used a laboratory Earths field nuclear magnetic resonance (NMR) instrument developed at LTHE and a large-scale commercial magnetic resonance sounding (MRS) system NUMISLITE from IRIS Instruments. We show that NMR could be a tool for investigating different processes in water-saturated waste samples. Our results show that domestic waste material contains ferromagnetic or paramagnetic particles that perturb the homogeneity of the geomagnetic field at a microscopic scale and render an NMR signal short. Consequently, only the spin echo technique can be applied for measuring. At a macroscopic scale, waste and different buried objects may also perturb the natural geomagnetic field. While investigating the landfill, we observed that magnetic anomalies (±2500 nT) are localized around some cells. This is probably linked to the presence of a higher percentage of metallic objects within the waste disposal. Our first appraisal of the possibility of investigating water-saturated waste in a laboratory using an Earths field NMR instrument shows that, with existing instruments, waste samples can be studied when the dry density of waste is less than approximately 450 kg/m3. Because the relaxation times of magnetic resonance signals in landfill may be short (T2 < 100 ms and T2*<10 ms), existing large-scale MRS instrumentation is not adapted to the investigation of domestic waste landfills.